General Description

Vacuum pumps are used for a number of applications concerning, above all, De-Airing systems  of water. Water vapour sucked by the vacuum pump and mixe...
Read More

Description

Vacuum pumps are used for a number of applications concerning, above all, De-Airing systems  of water. Water vapour sucked by the vacuum pump and mixed with the oil, producing emulsion, may cause serious damage to the pump when in notable concentration. For this reason it is important, for such applications, to propose a suitable de-airing system as the Air drying unit 86-D2005 filled with the  Silica gel (dessicator salt) 86-D0819 (see \#air-drying-unit\#). Vacuum pumps can also be fit with a Vacuum gauge with pin regulating valve and bleed valve as our model 86-D2004/5 (see accessories) unless a similar gauge is not fit to the equipment to be connected as for example Large size pyknometer  75-D1122. For more detail about the de-airing systems see Additional information.
We propose two Vacuum pump models:

  • 86-D2001 and 86-D2001/Z (110 V), for ultimate vacuum of 0.1 mbar
  • 86-D2003 and 86-D2003/Z (110 V), for ultimate vacuum of 0.01 mbar

Products

Code
Description
Units

Technical Specifications

Models 86- D2001
D2001/Z
D2003
D2003/Z
Free air displacement liter/min: 75 75
Ultimate vacuum mbar: 0.1 0.01
Power 180 W 240 W
Dimensions approx.: 300x150x240 mm 300x150x240 mm
Weight approx.: 8,5 kg 9,5 kg

 

Accessories and Spare Parts

Code
Description
Units