Mechanical and Physical Properties

icon youtube
Micro-Deval testing machine model 48-D5242/A with base accessory 48-D5242/A1 and testing drums

Aggregates’ properties are transmitted to the compounds they will eventually become part of. Our range of testing equipment allows you to analyze the thermal, physical, mechanical, chemical and humidity characteristics required by international standards so that you can predict the future behavior of the bituminous mixtures, concrete and mortar made with the aggregates tested.

Abrasion Testing Machine

Used for determining the resistance to abrasion/wear of natural stones.

AAV Abrasion Machine

The test provides a measure of the resistance of aggregate to surface wear by abrasion. The machine,

Accelerated Polishing Machine (PSV)

The Polished Stone Value (PSV) of a material used as road surfacing is a measure of how rapidly it b

Advanced Climatic Cabinets

Two versions of this advanced thermal chamber are available.

Apparent Particle Density of Lightweight Aggregates

This apparatus is used for quick determination of the apparent particle density of lightweigh

Basket for Magnesium Sulphate Test

The test requires a number of other general laboratory equipment such as balances, oven, sieves, etc

Baskets for Sodium or Magnesium Sulphate Test

The test requires a number of other general laboratory equipment such as balances, oven, sieves etc.

Bohme Abrasion Wheel Tester

Used for testing of: natural stones, concrete paving blocks, flags, kerbs, screed materials...

Bulk Density Measures

Stainless steel construction with handles.

Chapman Flask

Used for determining the amount of surface moisture in fine aggregate.

Colour Standard Glass Scales

Used for determining the organic impurities in fine aggregates by the colorimetric method together..

Crushing Resistance of Lightweight Aggregate Apparatus

Steel cylinder and piston. Two versions available: 113 and 76 mm internal dia.

Crushing Value Apparatus (ACV)

Two versions available: 150 (standard) and 75 mm diameter.. 57,8 HRC both models.

Deval Abrasion Test Machine

A rotating frame to support two steel cylinders complete with covers and locking device.

Drying Shrinkage Prism Mould (50x50x200 mm)

Used for determining the effect of aggregates on the drying shrinkage of concrete.

Filler Compaction Apparatus

The apparatus is used for the determination of the void content of dry compacted filler.

Hammer Mill

This is one of the apparatus required to obtain particles that pass through 300 µm sieve.

Impact Testing Machine

Used to determine the aggregate impact value (AIV) which provides a relative measure of the resistan