General Description

Shrinkage mould The UNI 11307 method is suitable for the determination of hydraulic axial shrinkage on concrete beams during hardening. According to...
Read More

Description

Shrinkage mould
The UNI 11307 method is suitable for the determination of hydraulic axial shrinkage on concrete beams during hardening.
According to this method, steel pins shall be glued on the head surfaces of the specimen in order to measure the dimensional changes of specimens properly stored in temperature and specified humidity conditions. The test is performed with the 55-C0100/MB11 beam mould and the shrinkage measurement by the 55-C0115/3D apparatus.

Beam mould
Made of precisely machined cold finished steel , 100x100x500 mm
Weight approx.: 19 kg

Steel pins
To be glued on the beam ends surfaces

Shrinkage measurement apparatus
Metal stand, fitted with reference bar and digital gauge 25.4 x 0.001 mm, with output for PC. Cable not included. See accessories.
Weight approx. 14 kg

Products

Code
Description
Units

Standards

  • UNI 11307

Accessories and Spare Parts

Code
Description
Units