Controls Group http://www.controls-group.com/images/logo_controls.gif CBR equipment, BS version CBR equipment, BS version
close
Terre
Share

CBR equipment, BS version

Richiesta preventivo
chiudi
Stampa la pagina
BS 1377:4 | BS 1924:2
Immagini
CBR mould set BS version (partial)CBR mould set BS version (partial) Compaction rammer model 33-T0076/BCompaction rammer model 33-T0076/B Gauge tripod 34-T0093 with dial gauge 82-D1255 and swell plate 34-T0092Gauge tripod 34-T0093 with dial gauge 82-D1255 and swell plate 34-T0092 Soaking tank 34-T0100/B with CBR mouldsSoaking tank 34-T0100/B with CBR moulds Universal extrudel model 16-T0080 with 6Universal extrudel model 16-T0080 with 6" mould
DESCRIZIONE GENERALE
DESCRIZIONE GENERALE
This method is used for the laboratory evaluation of subgrade and subbase coarse materials in road construction. To perform this type of test, we propose moulds with various accessories listed in the table below and manual compaction rammers. Different models are available conforming to the various relevant specifications. Please note that very frequently, some of the items (e.g. Swell plate, Tripod etc.) are common to more than one standard test set. In this section moulds, suitable accessories and rammers conforming to BS are shown.
 
An alternative (and preferable) method of compacting is to use an automatic compactor. For more information, see link to other products below.
 
The CBR penetration test can be performed with a number of loading presses, some of them specifically designed for CBR tests, and others with multiple applications (Universal models), at different levels of sophistication. See link to other products below.
Altro +

Informazioni per l'ordinazione

BS equipment
Model Description Specifications Weight
kg  ~
34-T0090/BS1 CBR mould body Plated steel with both ends threaded to fit the base or collar. 152 mm ID.x127 mm high 3
34-T0090/BS2 Extension collar 152 mm ID. X 50 mm high 1
34-T0090/BS3 Perf. base plate Plated steel 1.8
34-T0090/BS4 Solid base/ top plate Plated steel 1.8
34-T0090/BS5 Cutting collar Plated steel 1
34-T0090/B6 “C” spanner To mount and dismount the collar from the mould body. Two required 1
34-T0090/B7 Tool for base plate To remove or mount the solid or perf. base plate from the mould 1
34-T0091/B Compaction plug with handle 150 mm dia. x 50 mm high 7.2
33-T0076/B Compaction rammer 50 mm dia rammer face, 450 mm fall, 4.5 kg weight 5.3
34-T0094/B Anular  weight Plated steel, 2 kg 2
34-T0095/B Split  weight Plated steel, 2 kg 2
34-T0095/C Tamping bar 12.7 mm dia. x380 mm long  
34-T0099 Straight edge 3x30x300 mm 0.3
82-D1694 Steel rule 500 mm long 0.1
86-D1800 Filter paper No.1x150 mm dia. Pack of 100 0.3
34-T0092 Swell plate With adjustable stem 1
34-T0093 Gauge tripod Non corrodible alloy 0.3
82-D1255 82- Dial gauge 10 mm travel, 0.01 mm divisions 0.1
82-D1257 (as alt to D1255) 82- Dial gauge 30 mm travel, 0.01 mm divisions 0.1
16-T0080 Universal extruder For 100 to 152.4 mm dia. samples 25
34-T0100/B Soaking tank Plastic, ID 680x490x540 mm 9.1

Documenti