Controls Group http://www.controls-group.com/images/logo_controls.gif Servo-Pneumatic Four Point Bend Apparatus Standalone MkIV Servo-Pneumatic Four Point Bend Apparatus Standalone MkIV
close
CONTROLS COVID-19 Response and Action
Asfalto/miscele bituminose

Servo-Pneumatic Four Point Bend Apparatus Standalone MkIV

  • Download:
AASHTO T321 | EN 12697-24 Annex D | EN 12697-26 Annex B | ASTM D7460
PRESTAZIONI PRINCIPALI
Compact and convenient, the Servo-Pneumatic Four Point Bend Apparatus Standalone features a digitally-controlled servo-pneumatic actuator that delivers highly accurate loading in both stress and strain control modes. Its beam cradle designed to subject asphalt beam specimens to four point bending with backlash free rotation and horizontal translation at all load reaction points. This new model is now designed to provide a range of precise strain measurement options - at top-center from floating beam (EN, Austroads), the neutral axis referencing the outer pivots (ASTM, AASHTO), or top-center referencing the outer pivots.

Controlling the Four Point Bend Apparatus Standalone is the Third Generation Integrated Multi-Axis Controls and Data Acquisition System (IMACS2) and UTS Neutron test application software.

The Four Point Bend Apparatus is of great benefit for your Superpave and other performance-based testing programs for measuring stiffness & fatigue properties, characterizing mixtures and as inputs into sophisticated pavement design models.

DESCRIZIONE GENERALE
DESCRIZIONE GENERALE
  • Digital servo- pneumatic actuator provides accurate control of loading waveshape
  • Includes both on-specimen and outer fixed reference point strain measurement capabilities
  • Deflection can be measured at the neutral axis or at the top surface of the specimen.
  • Backlash free rotation and translation on all load and reaction points
  • Sinusoidal or haversine controlled stress loading
  • Constant force motorized clamping with multiple preset force levels
  • Non-linear regression data fitting ensures reliable determination of phase and modulus

Altro +

Caratteristiche tecniche

  • Loading frequency: up to 60 Hz (load limitations apply at higher frequencies)
  • Load capacity: up to 5 kN dynamic
  • Optional on-specimen displacement transducers LVDT +/- 0.5mm, +/- 1mm or +/- 2.5mm

SPECIMEN DIMENSIONS

  • Specimen sizes: Max height 70 mm, Max width 80 mm, Length from 380 mm to 500+ mm
  • Accommodates typical 50 x 50 x 400 mm, 60 x 60 x 400 mm, 50 x 63 x 400 mm and 70 x 70 x 500 mm specimens

LOADING SPANS

  • Inner span ≤118.5 mm to >140 mm
  • Outer span ≤355.5 mm to >420 mm
  • Yoke Alignment Tool 50 x 50 x 355.5 mm (H x W x Outer span centers) 70 x 70 x 420 mm (optional)


DIMENSIONS AND WEIGHT

  • Apparatus 600 x 230 x 490 – 560mm (H x D x W) / 35kg
  • IMACS2 445 x 280 x 245 mm (H x D x W) / 11kg
  • Air Accumulator 330 x 470 x 450mm (H x D x W) / 9.5kg

SERVICES

  • Air supply Clean, dry air at 800 – 900kPa
  • Minimum flow rate 5 liter/sec

Informazioni per l'ordinazione

79-PV74A12/I2
Servo-Pneumatic Four Point Bend Apparatus standalone, including IMACS2 digital control and data acquisition system.
110-230 V, 50-60 Hz, 1 ph

79-PV70206
On-specimen LVDT (+/-0.5mm) with ILC

79-PV70407
On-specimen LVDT (+/-1mm) with ILC

79-PV70408
On-specimen LVDT (+/-2.5mm) with ILC

Accessori

Environmental Chamber
79-PV70E02
Environmental chamber for servo-pneumatic testing machine, -25 to 60° C.
110-230 V, 50-60 Hz, 1 ph.

Informazioni Aggiuntive

The specimen is laterally positioned by eye using etched lines as visual guides.
Servo-motor driven ball screws operate and adjust themselves continuously during the test, at one of multiple preset force levels, to ensure that vertical clamping of the specimen remains in full compliance with the standards at the clamping surfaces.
 
The Pneumatic Four Point Bend Apparatus is equipped with a bottom loading actuator with high performance servo-valve, PID closed-loop control and run time adaptive control algorithm that adjusts the command signal during the test. The control system uses load and strain feedback signals.

IPC Global’s UTS or UTS Neutron test and control software are known for their simplicity in use, clarity of results and analytical power. Developed from expert knowledge of applications, they feature real-time graphs for monitoring the specimen during the test; portable binary data files for sharing, reviewing & analysis; and ‘live’ transducer levels display. Selectable non-linear regression data fitting ensures reliable determination of phase and modulus.
UTS neutron also features three license levels to meet all user types, configurable user access rights, multi-language, plus optional Test Generator Wizard, Graphical block programing to create or edit tests and custom report creation.

Documenti