Controls Group http://www.controls-group.com/images/logo_controls.gif WIZARD Auto SMARTline Automatic Control Console WIZARD Auto SMARTline Automatic Control Console
Fermer
Accès partenaires
Pas encore enregistré?
Mot de passe oublié?
CONTROLS COVID-19 Response and Action
Béton

WIZARD Auto SMARTline Automatic Control Console

  • Download:
PRINCIPALES CARACTÉRISTIQUES
WIZARD Auto is CONTROLS new standard automatic Quality Control system for compression and flexural testing and includes many new features and enhancements to improve the user-friendliness, efficiency, operator comfort and energy savings.
 
QC testing performance has just taken a step change improvement with CONTROLS abandoning manual test control and now features automatic closed-loop PID control of loading-rate using VFD inverter-technology control of the high specification AC motor.
 
Wizard Auto automatically and accurately performs tests at the correct test speed, ensuring compliance to Standards and with no effect due to operator variables.
 
Mainly dedicated to routine failure tests (compression, flexure and indirect tensile), WIZARD Auto is the perfect solution to ensure total certainty of testing accuracy and strict conformity to international Standards.In fact being an automatic system it allows:
  • Reduced opportunities for operator errors: improving accuracy of results and repeatability.         
  • Easy-to-use: even for operators with limited expertise.
  • Conforming to Standards: the machine automatically performs the test at correct test speed. Conformance to Standards can be easily proven.
  • High performance: high speed pump closes the daylight above the specimen at the fasted speed allowing a very high throughput of tests.
  • Operator comfort: due to the significant noise reduction.
  • Energy saving: with 50% reduction in energy consumption.


DESCRIPTION GÉNÉRALE
DESCRIPTION GÉNÉRALE
WIZARD Auto is also available in a stand-alone configuration providing a cost-effective way to retrofit any make of compression testers fitted with old Bourdon gauges or unreliable electronic readout unit and power pumps with manual flow control. Our SMARTline Control Consoles will transform any old testing system into one that is automatic and fitted with the latest technology.

QC testing performance has just taken a step change improvement with CONTROLS abandoning manual test control and now features automatic closed-loop PID control of loading-rate using VFD inverter-technology control of the high specification AC motor.
 
WIZARD Auto automatically and accurately performs tests at the correct test speed, ensuring compliance to Standards and with no effect due to operator variables.
Plus +

Technical specifications

WIZARD AUTO AUTOMATIC POWER AND CONTROL SYSTEM

Hydraulics
  • Max pressure 700 bar
  • Power 750 W
  • Dual stage pump: low pressure/high delivery for fast piston approach and high pressure/low delivery for loading.
  • AC motor fitted with VFD inverter device featuring high efficiency, reduction of power consumption and silent operation.
  • Second frame optional facility using valve selector.

 Hardware
  • Two 16 bit analog channels for load sensors
  • Wide graphic display 128 x 80 pixel
  • Sampling rate 50 Hz
  • Internal memory
  • RS 232 port for data download (including load/time graph points) to PC in ASCII format
  • Integrated printer as optional. See accessories

Firmware
  • Real time display of load and stress
  • Automatic application of the selected load rate
  • Execution of loading ramps with the possibility to manually increase or decrease the test speed during the test
  • Peak detection and saving
  • Language selection
  • Multi-coefficient linearization of the calibration curve for better accuracy at low loads
  • Multiple units: Lbf / Ton / kN.

Phisical Specifications
  • Overall dimensions: (hxlxd) 1292x350x450 mm
  • Weight approx .: 80 kg

Ordering info

50-C10W02
WIZARD Auto SMARTline, Automatic Control Console. 230 V, 50-60 Hz, 1 ph 

50-C10W04
WIZARD Auto SMARTline, Automatic Control Console110 V, 60 Hz, 1 ph

Additional Information

Standards
The following standards refer to the execution of the testing procedures (eg load rate, load application, accuracy, etc.) as the mechanical and physical requirements.
  • EN 12390-4  
    Specification for compression testing machine
  • EN 12390-5  
    Flexural strength of test specimens
  • EN 12390-6  
    Tensile splitting strength of test specimens
  • EN 1338        
    Concrete paving blocks
  • EN 1339        
    Concrete paving flags
  • EN 1340        
    Concrete kerb units
  • EN 196-1      
    Determination of cement strength
  • EN 772-1      
    Determination of compressive strength of masonry units (blocks)
  • ASTM C39    
    Compressive strength of cylindrical concrete specimens
  • ASTM C78    
    Flexural strength of concrete. Third point loading
  • ASTM C293  
    Flexural strength of concrete. Center point loading
  • ASTM C496  
    Splitting tensile test of cylindrical concrete specimens
  • AASHTO T22
    Compressive strength of cylindrical concrete specimens

Upgrading

(To be specified at time of order: these items has to be factory installed.)

Serial printer for Wizard testers
50-Q60W/PR
Upgrade of a WIZARD Auto system to incorporate a serial printer in the rear panel, allowing results to be printed at the end of test

Second frame connection
The WIZARD Auto  System can be upgraded with a hydraulic valve for controlling (not simultaneously) a second frame.
50-C10W/2F 
Two-way valve to control a second frame. 

Documents