Controls Group Universal asphalt and concrete saw, MULTISAW Universal asphalt and concrete saw, MULTISAW
Accès partenaires
Pas encore enregistré?
Mot de passe oublié?
CONTROLS COVID-19 Response and Action

Universal asphalt and concrete saw, MULTISAW

A unique machine specifically designed for laboratory use to precisely cut Asphalt, Concrete and Rock samples

  • Download:
  • Standards in terms of precision, planarity and perpendicularity of the specimens.
  • High rigidity and stability
  • Slab and prism of any shape and dimensions can be without additional accessories (see table for maximum dimensions)
  • Jig for round cores, from 100 to 150 mm and for 200 mm dia, length up to 300 mm
  • Unique clamping mechanism for cylindrical specimens minimizes specimen damage. Use of a sacrificial PVC tube produces a superior finish and minimizes the edge of the chipping of asphalt samples
  • Easy spacer system allows precise preparation of beams or cores
  • Saw blade to home position
  • Motor mounted on twin chrome-plated steel rails with sealed bearings
  • Also suitable for concrete and rock samples
Standard cutting machines in the market are standard saws for field use in the building industry. They do not assure the rigidity and stability to obtain precisely specimens for laboratory use. For this reason, we have designed and produced the specific requirements of the relevant Standards and consequently of the Research and Central laboratories. 

Multisaw  is a universal sawing system for fast, accurate cutting of beams from prisms and for trimming cylinders. An easy-to-use spacer system sets the specimen position and allows beams or cores to be cut without the need for measurement. The saw blade advances and retracts to the home position by a user-friendly hand wheel.

The Multisaw includes the multislab jig, complete with table and manual clamping device for slabs. Cores at the desired length. It can be fitted with 650 mm dia. blade with a maximum cutting depth of 200 mm and prism length of 500 mm (extendable to 700 mm, on request).

The Multisaw allows an easy-to-use sawing system for the Four-Point Bending Beam tests, Two Point Bending Beam tests, TSRST, Texas Overlay Test, Prall Test, Semi-Circular Bend Test, Wheel Tracking Tests with large and small devices, or any concrete beam or cylinder. The system allows cylindrical cores with diameters from 100 to 150 mm, and 200 mm dia. to be quickly and accurately cut to different lengths from 10 to 300 mm.

The Multisawcan be used as part of your  Superpave performance based  testing  program. 
Plus +

Technical specifications

Blade diameter     650 mm
Max cutting depth 200 mm
cores * 100 or 150 mm
Prism length * Max 500 mm
Accuracy Length, perpendicularity and flatness +/- 1% max. according to Standards
Blade speed 1400-1680 rpm (50/60 Hz)
Cooling Water recirculation pump and tank (included)
Power supply 5 kW
Voltage 400 V, 50 Hz, 3 ph or 220 V, 60 Hz, 3 ph
Dimensions (lxwxh) 2000 x 800 x 1700 mm
Weight approx.  450 kg
* Models suitable for cores 38 to 200 mm dia. and prisms up to 700 mm, available on request

Ordering info

MULTISAW, asphalt saw, complete with multi-slab jig. Blade not included. 400V / 50 / 3ph
As above but 220 V, 60 Hz, 3 ph.


77-PV47000 / 1
Diamond blade 650 mm dia. for asphalt 

77-PV47000 / C1
Diamond blade 650 mm dia. for concrete

77-PV47000 / 2
Sacrifical PVC tube for 100 mm dia. core (consumable)

Manual core locking Jig for round cores, from 38 to 200 mm diam., to cut samples with manual feeding, from 10 to 300 mm length.
Trapezoidal specimens jig to be used in Two Point Bending Test, according to EN 12697-24 and 26.
Jig for Wheel Tracking cores according to AASHTO T324, Semi-Circular Bend test samples according to EN 12697-44 / AASHTO TP105 / AASHTO Draft (except the notch) and Disk Shaped Compact Tension samples according to ASTM D7313 (except the notch and two holes ). 76-PV47014 is also required.
Jig for Texas Overlay Test according to TX-248-F. 77-PV47011 or PV47014 is required.

Additional Information

  • Cutting of prisms and slabs to be used in Four Point Beam Bending tests according to EN 12697-24D and 26B and AASHTO T321
  • Cutting of trapezoidal specimens to be used in Two Point Beam Bending tests according to EN 12697-24A and 26A
  • Cutting AMPT cylindrical specimens round cores
  • Cutting TSRST specimens according to EN 12697-46 and AASHTO TP10
  • Cutting and dressing of Wheel Tracking slabs or cores according to EN 12697-22 and AASHTO T324
  • Cutting Prall test specimens according to EN 12697-16
  • Cutting Overlay test specimens according to TX-248-F
  • Cutting Semi-Circular Bend test specimens according to EN 12697-44 (except for the notch)
  • Cutting concrete slabs and cylinders
  • Cutting accurately 100, 150 and 200mm dia. cylindrical cores to different lenghts.