Splitting tensile test devices
Model 50-C9000/C is used for splitting tensile tests on cylindrical specimens.
Model 50-C9070/C is used for splitting tensile tests on concrete block pavers and concrete cubes.
For both models max total height is 370 mm (14.6"). The 370 mm (14.6") vertical daylight can easily obtained removing the lower platen of the compression tester.
- Max vertical daylight: 225 mm (8.8"). Total height: 370 mm (14.6")
- Min vertical daylight: 90 mm (3.5"). Total height: 250 mm (9.8")
- Max horizontal daylight: 160 mm (6.3")
- Total width: 250 mm (9.8")
- Max travel: 45 mm (1.8")
- Bearers length : 350 mm (13.8")
Technical specifications
Model |
50-C9000/C |
50-C9070/C |
50-C9000/A |
Max. height1 |
370 mm (14.6")1 |
370 mm (14.6")1 |
388 mm (15.3") |
Overall dimensions, width/length |
250/340 |
250/335 |
346/525 |
Usable with |
All compr. Testers |
All compr. testers |
With 4000/5000 kN compression testers only |
Weight approx. kg |
28 kg (61.7 lbs) |
28 kg (61.7 lbs) |
65 kg (143,3 lbs) |
-
When testing 150 mm (6") and 160 mm (6.3") dia. specimens, the vertical height required is 325 mm (12.8").
When testing 100mm (4") dia. specimens, the vertical height required is 275 mm (10.8").
To adjust remaining vertical dayligth See Distance pieces to adjust the vertical daylight
Ordering info
50-C9000/C
Splitting tensile test device for cylinders up to dia. 160x320 mm (6.3"x12.6"). Conforming to EN 12390-6 and ASTM C496
50-C9000/A
Splitting tensile test device for cylinders dia. 250x500 mm (9.8"x19.7"). Conforming to EN 12390-6
50-C9070/C
Splitting tensile test device for concrete block pavers and concrete cubes. Conforming to EN 1338 and EN 12390-6
Accessories
50-C9002
Hardboard packing strips 4x15x345 mm to EN 1338 and 12390-6. Pack of 50
50-C9002/A
Plywood packing strips 3x25x345 mm (0.1"x1"x13.6") to ASTM C496. Pack of 50
50-C9001/A
Hardboard packing strips 4x15x550 mm, for 50-C9000/A device. Pack of 50
Documents







