Controls Group http://www.controls-group.com/images/logo_controls.gif Special calibration procedures Special calibration procedures
Fermer
Accès partenaires
Pas encore enregistré?
Mot de passe oublié?
Béton
Share

Special calibration procedures

Demande de prix
close
print page
EN 12390-4 | ASTM E74
DESCRIPTION GÉNÉRALE
DESCRIPTION GÉNÉRALE

These procedures can be applied to Concrete, Cement and Flexural testing machines fitted with WIZARD 2, DIGIMAX 3, PILOT and AUTOMAX systems and testing systems AUTOMAX E, MCC and ADVANTEST.

The calibrations are obtained by selecting suitable load sensors and using the calibration facilities of the Control Systems’ software. To be specified at the time of ordering.
Plus +

Technical specifications

Machines/Frame Series Calibration in Class 1 (A) Identification code
All concrete compression testing frames from 1500 to 5000kN capacity From 1% to 100% of full scale  50-C0050/CAL
All cement compression testing frames, 300 kN and 600 kN testing chambers only From 1% to 100% of full scale  50-C0050/CAL
Cement compression Testing frame 500 kN capacity (model fitted with load cell) From 0.1% to 100% of full scale  50-C0050/1CAL*
All cement double chamber testing frames, for 15 kN chamber From 5% to 100% of full scale  50-C0050/CAL5
Flexural testing frames fitted with load cells:
50-C1201/BFR
50-C1401/BFR
50-C1601/FR		 From 1% to 100% of full scale  50-C0050/CAL
Flexural testing frames fitted with pressure transducers:
50-C0910/FR
50-C1200/BFR
50-C1400/BFR		 From 5% to 100% of full scale  50-C0050/CAL5

*Special calibration available only if the frame is supplied with an automatic control system Smart Line or Compact Line version.

Ordering info

50-C0050/1CAL                          

Special calibration of load digital readout unit  assuring class 1 from 0.1% of testing machine full scale (Class 1 accuracy from 0.5 to 500 kN). Available only for 500 kN capacity automatic compression machine or frame fitted with load cell, models 50-C92x1x. Special calibration available only if the frame is supplied with an automatic control system Smart Line or Compact Line version.

50-C0050/CAL  
Special calibration of load digital readout unit assuring class 1 from 1% of testing machine full scale (maximum load).

50-C0050/CAL5  
Special calibration of load digital readout unit assuring class 1 from 5% of testing machine full scale (maximum load).

Documents