Béton
Platens surface hardness certificate
EN 12390-4 | ASTM C39 | ASTM C109 | ASTM C349 | EN 196-1 | ASTM D2664 | ASTM D2938 | ASTM D7012
DESCRIPTION GÉNÉRALE
DESCRIPTION GÉNÉRALE
The standards prescribe a minimum surface hardness depending on the type of test to be performed. When required, the hardness verification is performed with certified instruments. This option is identified by the Certificate code shown on the following table.
Technical specifications
Machine/frame/ accessory Series |
Platen dim. mm |
Certificate code |
Certified min. hardness HRC |
50-A12xxx 50-A22xxx 50-A32xxx 50-A39xxx+accessory 50-A39/CYL 50-C92xxx 50-C42xxx 50-C52xxx |
Dia. 165x30 | 50-C0050/HRD2 | 55 |
50-C13xxx 50-C23xxx 50-C43xxx |
Dia. 216x50 |
50-C0050/HRD3 |
55
|
50-C34xxx 50-C46xxx 50-C54xxx 50-C56xxx 50-C86xxx |
Dia. 300x50 | 50-C0050/HRD4 | 53 |
50-C25xxx 50-C35xxx 50-C47xxx 50-C57xxx 50-C67xxx 50-C77xxx |
310x510x50 (rectangular) |
50-C0050/HRD7 | 55.5 |
50-C69xxx 50-C79xxx |
310x510x90 (rectangular) |
50-C0050/HRD10 | 55.5 |
50-C68xxx 50-C78xxx |
300x300
(square)
|
50-C0050/HRD6 | 53 |
65-L17xxx 65-L27xxx 50-C9030 50-C9030/H |
40x40 (square) |
50-C0050/HRD5 | 60 |
65-L18xxx 65-L28xxx 65-L38xxx 65-L58xxx 50-C92x2x |
Dia. 165x30 | 65-L0050/HRD | 55.5 |
50-Q0050/HRD* |
Dia. 300x50 | 50-C0050/HRD9 | 58 |
*For rock testing to ASTM D7012 (ex D2938 and D3148)
Ordering info
50-C0050/HRD2
Supply of the compression machine/frame complete with traceable certificate of hardness of testing platens surfaces. Available only for ordering with the machine. Valid for ASTM concrete compression machine with round platens 165 mm dia.
50-C0050/HRD3
Supply of the compression machine/frame complete with traceable certificate of hardness of testing platens surfaces. Available only for ordering with the machine. Valid for concrete compression machine with round platens 216 mm dia
50-C0050/HRD4
Supply of the compression machine/frame complete with traceable certificate of hardness of testing platens surfaces. Available only for ordering with the machine. Valid for concrete compression machine with round platens 300 mm dia.
50-C0050/HRD5
Supply of the compression machine/frame complete with traceable certificate of hardness of testing platens surfaces. Available only for ordering with the machine. Valid for concrete compression machine with square platens 40x40 mm dia.
50-C0050/HRD6
Supply of the compression machine/frame complete with traceable certificate of hardness of testing platens surfaces. Available only for ordering with the machine. Valid for concrete compression machine with square platens 300x300 mm dia.
50-C0050/HRD7
Supply of the compression machine/frame complete with traceable certificate of hardness of testing platens surfaces. Available only for ordering with the machine. Valid for concrete compression machine with rectangular block platens 510x310x50 mm.
50-C0050/HRD9
Supply of the compression machine/frame complete with traceable certificate of hardness of testing platens surfaces. Available only for ordering with the machine. Valid for compression machine supplied along with 50-Q0050/HRD.
50-C0050/HRD10
Supply of the compression machine/frame complete with traceable certificate of hardness of testing platens surfaces. Available only for ordering with the machine. Valid for concrete compression machine with rectangular block platens 510x310x90 mm.
65-L0050/HRD
Supply of the compression machine/frame complete with traceable certificate of hardness of testing platens surfaces. Available only for ordering with the machine. Valid for cement compression machine with round platens 165 mm dia.
Supply of the compression machine/frame complete with traceable certificate of hardness of testing platens surfaces. Available only for ordering with the machine. Valid for ASTM concrete compression machine with round platens 165 mm dia.
50-C0050/HRD3
Supply of the compression machine/frame complete with traceable certificate of hardness of testing platens surfaces. Available only for ordering with the machine. Valid for concrete compression machine with round platens 216 mm dia
50-C0050/HRD4
Supply of the compression machine/frame complete with traceable certificate of hardness of testing platens surfaces. Available only for ordering with the machine. Valid for concrete compression machine with round platens 300 mm dia.
50-C0050/HRD5
Supply of the compression machine/frame complete with traceable certificate of hardness of testing platens surfaces. Available only for ordering with the machine. Valid for concrete compression machine with square platens 40x40 mm dia.
50-C0050/HRD6
Supply of the compression machine/frame complete with traceable certificate of hardness of testing platens surfaces. Available only for ordering with the machine. Valid for concrete compression machine with square platens 300x300 mm dia.
50-C0050/HRD7
Supply of the compression machine/frame complete with traceable certificate of hardness of testing platens surfaces. Available only for ordering with the machine. Valid for concrete compression machine with rectangular block platens 510x310x50 mm.
50-C0050/HRD9
Supply of the compression machine/frame complete with traceable certificate of hardness of testing platens surfaces. Available only for ordering with the machine. Valid for compression machine supplied along with 50-Q0050/HRD.
50-C0050/HRD10
Supply of the compression machine/frame complete with traceable certificate of hardness of testing platens surfaces. Available only for ordering with the machine. Valid for concrete compression machine with rectangular block platens 510x310x90 mm.
65-L0050/HRD
Supply of the compression machine/frame complete with traceable certificate of hardness of testing platens surfaces. Available only for ordering with the machine. Valid for cement compression machine with round platens 165 mm dia.
Documents







