Controls Group http://www.controls-group.com/images/logo_controls.gif Load cells Load cells
Fermer
Accès partenaires
Pas encore enregistré?
Mot de passe oublié?
CONTROLS COVID-19 Response and Action
Béton
Share

Load cells

Demande de prix
close
print page
ASTM E74 | EN ISO 376
PRINCIPALES CARACTÉRISTIQUES
Load cell with Digital tester and printer during the calibration of a compression tester.Load cell with Digital tester and printer during the calibration of a compression tester. Load cells dimensions from 5000kN to 300kN (see additional information)Load cells dimensions from 5000kN to 300kN (see additional information) Load cells dimensions from 100kN to 5kN (see additional information)Load cells dimensions from 100kN to 5kN (see additional information) Load cells from 5000kN to 300kN Load cells from 5000kN to 300kN Load cells from 100kN to 5kNLoad cells from 100kN to 5kN
  • High accuracy: Class 1 EN ISO 376
  • Stainless steel construction
  • Can be supplied with Official or Traceable calibration certificate
DESCRIPTION GÉNÉRALE
DESCRIPTION GÉNÉRALE
These high performance cells have been specially designed to meet the stringent requirement of EN ISO and ASTM standards, for calibration of compression testing machines. The cells have to be connected to a suitable Digital tester as, for example, our model 82-P0801/E Digimax Plus (see Digital instrumentation ).

The Load cells connected to the Digital tester, can be supplied complete with Official or Traceable calibration certificate which, as specified, concern either the cell or the digital tester. See ordering information.
Plus +

Technical specifications

  • Accuracy: Class 1 EN ISO 376
  • Linearity: < = ± 0.05% F.S.
  • Hysteresys: < = ± 0.05% F.S.
  • Repeatability o° -120° -240°: < = ± 0.145% F.S.
  • Reversibility: < = ± 0.240% F.S.
  • Zero: < = ± 0.030% F.S.
  • Zero balance: < = ± 1% F.S.
  • Supply voltage: 10 V
  • Material: stainless steel
  • Connector type: MIL-C-5015 7 poles male

Ordering info

LOAD CELLS


82-E0100/L5     
Load cell, 5 kN cap., complete with carrying case.

82-E0100/L25     
Load cell, 25 kN cap., complete with carrying case.

82-E0100/5     
Load cell, 50 kN cap., complete with carrying case.

82-E0100/10     
Load cell, 100 kN cap., complete with carrying case.

82-E0100/30
Load cell, 300 kN cap., complete with carrying case.

82-E0100/60     
Load cell, 600 kN cap., complete with carrying case.

82-E0100/100    
Load cell, 1000 kN cap., complete with carrying case.

82-E0100/200    
Load cell, 2000 kN cap., complete with carrying case.

82-E0100/300    
Load cell, 3000 kN cap., complete with carrying case.

82-E0100/500    
Load cell, 5000 kN cap., complete with carrying case.

Note: other capacities load cells are available on request.          

Calibration certificate, either Official or Traceable (options below), shall be ordered when load cell/s will be purchased along with digital readout unit.
 
82-E0100/ACC1 
Official ACCREDIA (EAL) calibration certificate   for the load cell connected to suitable digital tester for force verification. Calibration to EN  ISO 376, 10 points, 4 cycles. (increasing forces only). Suitable for load cells from >1 to 10 kN    
 
82-E0100/ACC2
Official ACCREDIA (EAL) calibration certificate   for the load cell connected to suitable digital tester for force verification. Calibration to EN  ISO 376, 10 points, 4 cycles. (increasing forces only). Suitable for load cells from >10 to 600 kN    
 
82-E0100/ACC3
Official ACCREDIA (EAL) calibration certificate   for the load cell connected to suitable digital tester for force verification. Calibration to EN  ISO 376, 10 points, 4 cycles. (increasing forces only). Suitable for load cells from >600 to 1000 kN    
 
82-E0100/ACC4
Official ACCREDIA (EAL) calibration certificate   for the load cell connected to suitable digital tester for force verification. Calibration to EN  ISO 376, 10 points, 4 cycles. (increasing forces only). Suitable for load cells from >1000 to 5000 kN 

82-E0100/TRC
Traceable calibration certificate for load cells from 5kN to 5000 kN cap., connected to the relevant Digital tester

Additional Information

Code 82- Capacity KN Diameter A mm Diameter B mm Dim. C Weight
E0100/30 300 129 100 164 10
E0100/60 600 129 100 164 12
E0100/100 1000 129 100 164 14
E0100/200 2000 129 100 164 16
E0100/300 3000 129 100 164 18
E0100/500 5000 168 140 203 35

Code 82- Capacity KN Diameter A mm Dim. B
E0100/10 100 82 110
E0100/5 50 82 110
E0100/L25 25 57 80
E0100/L5 5 57 80

Documents