Béton
Distance pieces to adjust the vertical daylight
Des images
DESCRIPTION GÉNÉRALE
DESCRIPTION GÉNÉRALE
Made of steel. Used to reduce the vertical daylight of the compression machine depending on the size of the specimen and considering that, in general, the maximum piston travel is 50 mm. The following sketch and table are a suitable application guide to help you in the selection of required distance pieces.
Technical specifications
Distance pieces required for specimen size:* The distance pieces here below listed refer to grinded cylinders
|
Machine and frames Series 50- |
Vertical daylight approx. mm |
Cylinders 4”x8” and Ø 100x200mm*  Q.ty Code |
Cylinders 6”x12”, Ø 150x300 and 160x320mm*  Q.ty Code |
Cube 100mm  Q.ty Code |
Cube 150mm  Q.ty Code |
Cube 200mm  Q.ty Code |
Cube 300mm  Q.ty Code |
Blocks up to 300x500x200mm (WxDxH) Q.ty Code |
| A12xxx | 370 | 1x C9084 |
1x L1000/40 1x L1000/20 |
1x C9084 2x L1000/40 1x L1000/20 |
- | - | - | - |
| C13xxx | 340 | 2x C9083 | 1x C9080 |
2x C9082 2x C9083 |
1x C9082 2x C9083 |
- | - | - |
| A22xxx | 380 |
1x C9084 1x L1000/20 |
1x L1000/40 1x L1000/30 |
1x C9084 2x L1000/40 1x L1000/30 |
- | - | - | - |
| C23xxx | 350 | 2x C9083 | 1x C9080 |
2x C9082 2x C9083 |
1x C9082 2x C9083 |
- | - | - |
| C25xxx (block platens) | 350 | 2x C9083 | 1x C9080 |
2x C9082 2x C9083 |
1x C9082 2x C9083 |
2x C9083 | 1x C9080 | 2x C9083 |
| A32xxx | 380 |
1x C9084 1x L1000/20 |
1x L1000/40 1x L1000/30 |
1x C9084 2x L1000/40 1x L1000/30 |
- | - | - | - |
| C34xxx | 350 | 2x C9083 | 1x C9080 |
2x C9082 2x C9083 |
1x C9082 2x C9083 |
1x C9082 1x C9083 |
- | - |
| C35xxx (block platens) | 350 | 2x C9083 | 1x C9080 |
2x C9082 2x C9083 |
1x C9082 2x C9083 |
2x C9083 | 1x C9080 | 2x C9083 |
| C42xxx | 405 |
1x C9084 1x L1000/30 |
3x L1000/30 |
1x C9084 3x L1000/30 1x L1000/40 |
- | - | - | - |
| C43xxx | 375 |
1x C9080 2x C9083 |
1x C9083 |
1x C9080 2x C9083 2x C9082 |
1x C9080 2x C9083 1x C9082 |
- | - | - |
| C46xxx | 350 | 2x C9083 | 1x C9080 |
2x C9082 2x C9083 |
1x C9082 2x C9083 |
2x C9083 | - | - |
| C47xxx (block platens) | 350 | 2x C9083 | 1x C9080 |
2x C9082 2x C9083 |
1x C9082 2x C9083 |
2x C9083 | 1x C9080 | 2x C9083 |
| C52xxx | 405 |
1x C9084 1x L1000/30 |
3x L1000/30 |
1x C9084 3x L1000/30 1x L1000/40 |
- | - | - | - |
| C54xxx | 375 |
1x C9080 2x C9083 |
1x C9083 |
1x C9080 2x C9083 2x C9082 |
1x C9080 2x C9083 1x C9082 |
1x C9080 2x C9083 |
- | - |
| C56xxx | 350 | 2x C9083 | 1x C9080 |
2x C9082 2x C9083 |
1x C9082 2x C9083 |
2x C9083 | - | - |
| C57xxx (block platens) | 350 | 2x C9083 | 1x C9080 |
2x C9082 2x C9083 |
1x C9082 2x C9083 |
2x C9083 | 1x C9080 | 2x C9083 |
| C67xxx (block platens) | 520 |
1x C9083 2x C9086 1x C9082 |
1x C9083 1x C9086 1x C9082 |
1x C9083 3x C9086 1x C9082 |
1x C9083 3x C9086 |
1x C9083 2x C9086 1x C9082 |
1x C9083 1x C9086 1x C9082 |
1x C9083 2x C9086 1x C9082 |
| C68xxx | 520 |
1x C9083 2x C9086 1x C9082 |
1x C9083 1x C9086 1x C9082 |
1x C9083 3x C9086 1x C9082 |
1x C9083 3x C9086 |
1x C9083 2x C9086 1x C9082 |
1x C9083 1x C9086 1x C9082 |
- |
| C77xxx (block platens) | 520 |
1x C9083 2x C9086 1x C9082 |
1x C9083 1x C9086 1x C9082 |
1x C9083 3x C9086 1x C9082 |
1x C9083 3x C9086 |
1x C9083 2x C9086 1x C9082 |
1x C9083 1x C9086 1x C9082 |
1x C9083 2x C9086 1x C9082 |
| C78xxx | 520 |
1x C9083 2x C9086 1x C9082 |
1x C9083 1x C9086 1x C9082 |
1x C9083 3x C9086 1x C9082 |
1x C9083 3x C9086 |
1x C9083 2x C9086 1x C9082 |
1x C9083 1x C9086 1x C9082 |
- |
| C86xxx | 350 | 2x C9083 | 1x C9080 |
2x C9082 2x C9083 |
1x C9082 2x C9083 |
2x C9083 | - | - |
Ordering info
Distance pieces for concrete compression testers50-C9080
Distance piece dia. 200x30 mm. Weight 7,3 kg
50-C9080/P*
Distance piece dia. 200x30 mm with threaded centering pin. Weight 7,3 kg
50-C9082
Distance piece dia. 200x50 mm. Weight 12,3 kg
50-C9082/P*
Distance piece dia. 200x50 mm with threaded centering pin. Weight 12,3 kg
50-C9083
Distance piece dia. 200x68 mm. Weight 16,7 kg
50-C9083/P*
Distance piece dia. 200x68 mm with threaded centering pin. Weight 16,7 kg
50-C9084
Distance piece dia. 96x158 mm. Weight 9 kg
50-C9086
Distance piece dia. 200x100 mm. Weight 25 kg
50-C9086/P*
Distance piece dia. 200x100 mm with threaded centering pin. Weight 25 kg
50-C9087
Distance piece dia. 96x130mm. Weight 8 kg
Distance pieces for cement compression testers
65-L1000/20
Distance piece dia. 165x20 mm. Weight 3,2 kg
65-L1000/30
Distance piece dia. 165x30 mm. Weight 4,7 kg
65-L1000/30P**
Distance piece dia. 165x30 mm with threaded centering pin. Weight 4,7 kg
65-L1000/40
Distance piece dia. 165x40 mm. Weight 6,4 kg
65-L1000/40P**
Distance piece dia. 165x40 mm with threaded centering pin. Weight 6,4 kg
65-L1000/68
Distance piece dia. 165x68 mm. Weight 10,5 kg
65-L1000/68P**
Distance piece dia. 165x68 mm with threaded centering pin. Weight 10,5 kg
* to be order along with item 50-Q0050/P6
** to be order along with item 50-L1000/P
Documents
AUTOMAX MULTITEST computerized control console
AUTOMAX Multitest represents a step change in versatility that allows modular upgrades from...
more
EN - Standard Automatic compression testers for cubes, cylinders and blocks WIZARD AUTO
Main features include:
Two channels for load sensors
Wide graphic...
more
EN - Top-of-the-range Automatic compression testers for cubes and cylinders AUTOMAX PRO
AUTOMAX PRO is CONTROLS’ new top-of-the-range Compact-Line compression machines and is...
more
Specimen grinding machine
The machine is used to grind and polish rock and concrete specimens, natural stones, ceramic...
more
