close
CONTROLS COVID-19 Response and Action
PRODUCT SEARCH
Results for: 'EN 17892:8'
Automatic triaxial tests system - AUTOTRIAX2 EmS

Soil mechanics - Static triaxial systems : Automatic triaxial tests system - AUTOTRIAX2 EmS

The AUTOTRIAX2  EmS is an advanced triaxial testing system that can automatically perform up to 6 entire and independent tests at the same time, from start to finish, without any human intervention.
The closed-loop feedback control system monitors the components status continuously, in order to react to any change in the parameter pre-set at each test stage.  
Autotriax2 EmS can perform different kind of triaxial tests, :
  • Total and effective stress tests UU (unconsolidated undrained), CU(consolidated undrained) and CD (consolidated drained) with isotropic conditions according to ASTM-BS-EN Standards; and CAU (consolidated undrained) and  CAD (consolidated drained) with anisotropic conditions. according to EN Standards 
  • Stress path tests following MIT and Cambridge methods;
  • K0 anisotropic volume controlled tests;
  • Permeability tests in triaxial cells according to BS 1377: 6;
  • Unsaturated soil triaxial test with control of matric suction using the axis translation method.
Also, additional software package available on request for performing:
  • CRS – Constant Rate of Strain
  • Unconfined compression
  • CBR (California Bearing Ratio)

A typical PC controlled fully automatic triaxial configuration includes:

Load frame 
TRITECH 50 kN or 100 kN: TRITECH original high-performance load frames for triaxial tests, ideal solution for advanced and research laboratories that want to perform high quality tests at high productivity levels, directly managed by data acquisition and control unit.  

Triaxial cell with accessories:
The proper model can be selected from our range (see triaxial load frame TRITECH  and triaxial cells for advanced applications or  double wall triaxial cells required for unsaturated tests) or, as alternative, existing machines can be used.

Data acquisition and control unit 
Data acquisition and control unit transmitting data and information between the software and all the active components, such as pressure controllers and Tritech triaxial load frame.

Pressure/volume controller
Four models are available depending on: max pressure capacity (3500 or 1700 kPa) and number of pressure lines (one or two).

Triaxial test automatic control and processing software.
The AUTOTRIAX2 EmS software is a comprehensive and user-friendly interface between the operator and the testing system.
 
 
The Autotriax2 EmS configurations can be extended and expanded in subsequent steps, in order to control further tests adding proper components. These operations can be easily made on site just configuring the user-friendly software, as a plug-and-play system.

continue
Triaxial test automatic control and processing software - AUTOTRIAX2 EmS

Soil mechanics - AUTOTRIAX2 EmS - Automatic triaxial testing equipment: Triaxial test automatic control and processing software - AUTOTRIAX2 EmS

The AUTOTRIAX2 EmS  software is a comprehensive and user-friendly interface between the operator and the testing system.  Installed on a PC communicating with the system over a fast Ethernet connection, the software can be used to configure the system(s), calibrate transducers, specify test...
continue