Soil
BS Sand replacement test sets
BS 1377:9 | BS 1924:2
Images
General description
General description
The verification of the degree of compaction can be determinate on site by a simple procedure consisting essentially in removing and weighing a part of compacted soil and replacing in the hole with sand by a simple apparatus recording the volume of sand and then calculating the density of the removed soil.
We propose three models to be selected conforming to the size of grained soils.
The sand pouring cylinders and calibration cans are made of cast aluminium and precisely machined. The tray is made of plated sheet steel.
We propose three models to be selected conforming to the size of grained soils.
The sand pouring cylinders and calibration cans are made of cast aluminium and precisely machined. The tray is made of plated sheet steel.
Technical specifications
Sand replacement set partsPart description |
35-T0125 100 mm dia. |
35-T0125/A 150 mm dia. |
35-T0126 200 mm dia. |
Sand pouring cylinder | 35-T0125/1 | 35-T0125/A1 | 35-T0126/1 |
Calibration can | 35-T0125/2 | 35-T0125/A2 | 35-T0126/2 |
Density tray | 35-T0125/3 | 35-T0125/A3 | 35-T0126/3 |
Weight approx. of complete set | 7.7 kg | 13 kg | 27.5 kg |
Each part can be purchased individually
Ordering info
35-T0125100 mm sand replacement complete set
35-T0125/A
150 mm sand replacement complete set
35-T0126
200 mm sand replacement complete set
Accessories
35-T0127Standard sand 0.2 to 0.6 mm grain size conf. to BS/ASTM/AASHTO. Sack of 50 kg.
Field density tools
Used to dig, level and remove the soil during the field density tests.
35-T0140
Metal dibber. Weight 300 g
35-T0141
Scraper. Weight 600 g
35-T0142
Steel pointed rod. Weight 100 g.
35-T0143
Density spoon. Weight 150 g.
35-T0144
Rubber mallet 50 mm dia. Weight 1 kg.
35-T0145
Hammer, 300 g.
35-T0145/G
Club hammer, 2 kg.
35-T0146
Density pick. Weight 1 kg.
35-T0147
Chisel 300 mm long. Weight 1 kg.
86-D1348
Lever lid tin, 5 liters cap, Weight 100 g.