Controls Group http://www.controls-group.com/images/logo_controls.gif Standalone all-in-one de-airing water system Standalone all-in-one de-airing water system
close
CONTROLS COVID-19 Response and Action
Soil mechanics

Standalone all-in-one de-airing water system

  • Download:
Main features
  • SPACE SAVING:  clever all-in-one design with vacuum pump, tank and control valves all integrated into one single unit needing only a small laboratory space.
  • EASY TO INSTALL: turn-key self-pumping system replaces the more cumbersome gravity feed design.
  • TIME SAVING: 20 liter batch of de-aired water can be produced 15 minutes water thanks to the smart combination of vacuum pumping and cavitation.
  • ENVIRONMENTALLY-FRIENDLY: diaphragm vacuum pump requires no oil

General description
General description
A de-airing water system removes the dissolved air from water  in order to use this water for it soil mechanics tests  (e.g triaxial and permeability) . Wykeham Farrance’s all-in-one unit will de-air water quickly and efficiently down to levels of dissolved air acceptable for geotechnical test methods. 

How it works
  • Simply place the De-airing Water Apparatus on a bench and fill the  de-airing tank  with water from the inlet valve.
  • Start the de-airing procedure. As the pump applies vacuum to the de-airing tank , the magnetic system will begin to stir the water at high speeds (approx. 1000rpm). Cavitation will then occur allowing water to be de-aired much faster than when only using vacuum.
  • Once finished, stop the cycle. The tank can be brought to the standard pressure, so it is ready to be pumped for filling the triaxial cell, pressure systems and hydraulic circuits. This procedure does not rely on gravity feeding. 
High productivity
It takes 15 minutes to produce a 20 liter batch of de-aired water thanks to the smart combination of vacuum pumping and cavitation.
 
Small footprint
The system can be used on a bench with no need to fit on the wall a separate water tank to fill the triaxial cell.

More +

Technical specifications

  • Tank volume capacity: 20 l
  • Tube dimension: ID: 6 mm OD: 8 mm 
  • VDC Diaphragm vacuum pump
  • Weight: 23 kg
  • Dimension (w x d x h): 340  x410 x 680 mm                                                                                            
  • Voltage: 220-110 V, 50-60Hz, 1ph

Ordering info

28-WF4212
Standalone all-in one bench solution de-airing water system with vacuum and cavitation technology.
220-110V, 50-60Hz, 1Ph
- 20 liter volume capacity
- VDC Diaphragm vacuum pump
- High speed magnetic stirring for creating cavitation
- Control panel for filling  

Accessories

28-WF4191
-  Nylon tubing 8x6 mm (OD-ID) 10 m coil.

Documents