General Description

AUTOMAX PRO is CONTROLS’ new top-of-the-range Smart-Line control consoles and is the first choice for automatic standard failure tests. A major devel...
Read More

Description

AUTOMAX PRO is CONTROLS’ new top-of-the-range Smart-Line control consoles and is the first choice for automatic standard failure tests.
A major development are the new cutting-edge connective technologies.

LinkLAB Laboratory Connectivity Package allows AUTOMAX PRO to be a connected part of your laboratory infrastructure by taking inputs from any number of ancillary measuring systems and devices increasing efficiency, eliminating transposing errors.

Products

Code
Description
Units

Technical Specifications

AUTOMAX PRO AUTOMATIC POWER AND CONTROL SYSTEM

Hydraulics

  • DC motor, 720W, 50-60Hz
  • Maximum working pressure 700 bar
  • Load/unload electrovalve for test execution via display/PC and automatic stop at specimen failure
  • Active control of up to 4 frames by selection via display/PC (third and fourth frame as option). See accessories.
  • ES Energy Saving technology to reduce the power consumption and enable silent operation


Hardware

  • 524,000 points high-resolution/stability analog channels
  • 4 channels for load sensors
  • Control frequency 250 Hz
  • Sampling frequency 250 Hz
  • 7”, 800 x 480 pixel, 16 M colors, icon-driven capacitive sensing touchscreen graphic display
  • Unlimited storage capacity for test data on internal 16 GB SD card
  • USB port for test data storage on external USB memory stick and for firmware upgrade
  • Ethernet port for PC / Internet /network communication
  • Optional integrated graphic printer including Load-Time plot
  • RS 232 port for data downloading in ASCII format


Firmware

  • Execution of compression, flexure, indirect tensile, ACV tests in automatic mode with load rate controlled by a closed-loop P.I.D. system
  • Execution of loading ramps with the possibility to manually increase or decrease the test speed during the test
  • Pause command to maintain steady load can be enabled at a pre-set value before the test or as required while testing
  • Simultaneous display of load, specific load, actual load rate, load/time graph
  • Saving of the specimen failure type (to EN or ASTM) in the test results
  • Download data to internal printer (optional) or to PC via RS 232 port or to USB memory stick
  • PC / network communication via Ethernet
  • Multi-coefficient linearization of the calibration curve for better accuracy at low loads thus avoiding the use of a second pressure transducer
  • Recording facility for up to 9 test profiles for each channel including: type of test (e.g. compression, flexural, indirect tensile), specimen size and shape, load rate, test standard and other general information. Each one of the recorded test profiles can be recalled automatically to save time
  • Improved PID algorithm and multi PID selection. Up to 3 different PID settings can be tuned for a variety of materials (e.g. cylinder with neoprene pads, low strength specimens) and test methods (e.g ACV, flexure, indirect tensile).
  • Compatible with the newly released Datamanager software, tailored for construction material testing laboratories, for real-time data acquisition, display and management
  • Peripheral devices integration with Link-LAB
  • Automatic load measurement verification procedure, by connecting suitable load cells and our digital readout unit to PC
  • Language selection (including Cyrillic and Chinese)
  • Unit selection (kN, ton, lbf)
  • USB port for firmware upgrade and safe backup of the original configuration data (PID, calibration, etc.), in case of loss and/or data corruption. The restore of the machine to the factory settings is easy avoiding the need of any technical support.


PHISICAL SPECIFICATIONS

  • Overall dimensions: (hxlxd) 1292x350x450 mm
  • Weight approx .: 80 kg

Accessories and Spare Parts

Code
Description
Units

Documents

Videos

AUTOMAX PRO – NEW COMPACT-LINE CONCRETE COMPRESSION MACHINE
Automax Pro (Version Española)
Automax Pro short version (Version Española)
Automax Pro (Version française)
Automax Pro short version (Version française)
Automax Pro and Pro-M
Short introduction to the all NEW AUTOMAX PRO
Retrofit in three easy steps