The new MULTISPEED tester is the ideal solution for Road testing laboratory. The 50 kN capacity and the fully variable test speed of 0.2 to 51 mm/min make it possible to perform not only the CBR and Marshall tests, but many other applications as for instance Indirect Tensile test, Quick Triaxial tests, Unconfined and Uniaxial soil testing and, in general, all test to be performed under displacement control. The machine can be equipped with analogical or digital load/displacement measurement systems as well as with the specific accessories, to suit either the field or central laboratory requirement.
The MULTISPEED tester feature a rigid two column structure with upper cross beam which can be set at various height. The load jack, DC motor and controls are housed in a specially designed base cabinet. When fit in the digital mode, test data are acquired and processed by the Digimax or by other similar instruments.
One of the main features of the new MULTISPEED is the control of test speed which is first easily set and then shown on the display. Furthermore, the test stroke can be set at the beginning of the test with automatic stop, avoiding to overload the machine and the specimen, thus assuring the operator safety. This important feature also permit to perform the speed calibration of the machine by micrometric manual adjustment by the operator. The display also show the travel direction of lower platen. The front panel is also fitted with an emergency button and two operating led: machine switched on and travel direction.