General Description

The apparatus automatically compacts the sample and stops after the preset number of blows. The mould is held in position by a quick and practical cla...
Read More

Description

The apparatus automatically compacts the sample and stops after the preset number of blows. The mould is held in position by a quick and practical clamping device. The trip mechanism is arranged so that the sliding hammer falls at the same distance for every blow. The compactor includes the laminate hardwood block  and vibrated concrete base 450x450x200 mm.
All moving parts are protected with safety guard, which stops automatically the compactor when opened, and the control panel is fit with an emergency stop red button, all conforming to CE prescriptions.
The compactor can be factory installed inside the 76-B4000/CB Noise reduction and CE security cabinet. See accessories.

Products

Code
Description
Units

Technical Specifications

  • Power rating: 800 W
  • Blows frequency: 50 blows in 55/60 s
  • Sliding mass weight: 4535 ± 15 g
  • Total hammer weight: 7850 ± 50 g
  • Free fall height:  457± 3 mm
  • Laminated hardwood block: 200x200x450 mm, density 670 to 780 kg/m3
  • Concrete base (included): 450x450x200 mm
  • Overall dimensions: 540x556x2066 mm
  • Weight approx.: 270 kg

Standards

  • EN 12697-10
  • EN 12697-30

Accessories and Spare Parts

Code
Description
Units