close
Product Search by Test Determination and Standard
Test determination of: Standard Products
Compression testing  
  • Compression frame only
ASTM C39 / AASHTO T22 / ASTM C140
EN 12390-4
EN 12390-4 / ASTM C39 / ASTM C109 / ASTM C349 / EN 196-1 / ASTM D2664 / ASTM D2938 / ASTM D7012
 
  • SMART-Line control consoles
 
  • Accessories for Compression Testers
EN 1338 / EN 1339 / EN 1340 / EN 12390-3 / ASTM C39 / EN 12390-6 / ASTM C496 / ASTM C109 / EN 12390-5 / ASTM C78 / ASTM C293 / ASTM C348 / EN 196-1
 
  • ASTM and AASHTO compression machines, COMPACT-Line
ASTM C39 / AASHTO T22
ASTM C39 / AASHTO T22
ASTM C39 / AASHTO T22 / ASTM C140 / ASTM C1314
AASHTO T22
 
  • EN Standards compression testers, COMPACT-Line
EN 12390-4
EN 12390-4
EN 12390-4
EN 12390-4
EN 12390-4
 
  • General utility compression testers, COMPACT-Line
Splitting tensile test EN 1338 / EN 12390-6 / ASTM C496
Special calibration EN 12390-4 / ASTM E74
Flexural test on concrete beams EN 12390-5 / ASTM C78 / ASTM C293 / AASHTO T97
Flexural testing  
  • Flexural testing frames
EN 12390-5 / ASTM C78 / ASTM C293
EN 1339 / EN 1340 / EN 12390-5 / ASTM C78 / ASTM C293
EN 1339 / EN 1340 / EN 12390-5 / ASTM C78 / ASTM C293 / EN 14488-5 / ASTM C1609 / ASTM C1018
EN 1339 / EN 1340 / EN 12390-5 / ASTM C78 / ASTM C293 / EN 14488-5 / ASTM C1609 / ASTM C1018
EN 1339 / EN 1340 / EN 12390-5 / ASTM C78 / ASTM C293 / ASTM C1550 / EN 14488-5 / ASTM C1609 / ASTM C1018
EN 1339 / EN 1340 / EN 12390-5 / ASTM C78 / ASTM C293 / ASTM C1550 / EN 14488-5 / ASTM C1609 / ASTM C1018
EN 1339 / EN 1340 / EN 12390-5 / ASTM C78 / ASTM C293 / ASTM C1550 / EN 14651 / EN 14488-5 / ASTM C1609 / ASTM C1018
Elastic modulus of concrete  
  • Elastic modulus accessories
ISO 6784 / ASTM C469 / BS 1881:121 / DIN 1048 / UNI 6556 / EN 13412 / EN 13286-43
ISO 6784 / ASTM C469 / BS 1881:121 / DIN 1048 / UNI 6556
ASTM C1550 / ISO 6784 / ASTM C469 / DIN 1048 / UNI 6556 / EN 14651 / EN 14488-3 / EN 14488-5 / EN 13412 / EN 13286-43 / ASTM C1609 / EN 12390-13 / BS 1888: 121
Toughness of fiber reinforced concrete ASTM C1609 / ASTM C1018
First crack strength and ductility of fiber reinforced concrete EN 14651
Energy absorption of sprayed concrete ASTM C1550 / EN 14488-5
Verification of force transfer EN 12390-4
Force verification  
  • Calibration of compression and flexural testers
ASTM E74 / EN ISO 376
ASTM E74
Workability of concrete EN 12350-2 / ASTM C143 / AASHTO T119
Flow table test EN 12350-5
Kelly ball method ASTM C360 / ASTM D6024
Workability (NF method)
K-Slump method ASTM C1362
Degree of compactability
Consistency by VEBE' test EN 12350-3 / ASTM C1170
Testing SCC concrete  
  • SCC testing apparatus
EN 12350-8
EN 12350-11
EN 12350-12
Workability of No slump concrete (Scandinavian method)  
  • Gyratory compactors for cement and concrete
Density of fresh concrete EN 12350-6
Air content of fresh concrete EN 12350-7 / ASTM C231 / AASHTO T152
Setting time by penetration AASHTO T197 / UNI 7123
Laboratory mixing
Making concrete specimens  
  • Concrete specimen moulds
EN 12390-1
ASTM C39 / EN 12390-1 / AASHTO T23 / AASHTO T126
ASTM C31 / ASTM C192
EN 12390-1
Specimen compaction  
  • Concrete compaction
EN 12390-2
AASHTO T23 / AASHTO T126 / EN 12390-2 / ASTM C31 / ASTM C192
Accelerated concrete curing ASTM C684 / BS 1881:112
Specimen grinding  
  • Specimen grinding machine
EN 12390-2 / ASTM D4543
EN 12390-2 / ASTM D4543
Specimen cutting
Capping of cylindrical specimens EN 12390-3 / AASHTO T23 / AASHTO T126 / ASTM C31 / ASTM C192 / ASTM C617
AASHTO T22 / AASHTO T851 / ASTM C1231
Density of hardened concrete BS 812:2 / EN 12390-7 / ASTM C127 / AASHTO T85
Depth of penetration of water under pressure EN 12390-8
Hydraulic shrinkage UNI 11307
Restrained expansion of mortar and concrete UNI 8147 / UNI 8148
Rebar corrosion ASTM C876 / BS 1881:201 / UNI 9535
Cover measurement  
  • NDT Durability test apparatus
BS 1881:204
Carbonation test  
  • NDT Durability test apparatus
ASTM C1202 / AASHTO T277
EN 13295
EN 13295 / UNI 9944
Chloride content
Permeability to oxygen UNI 11164
Water and gas permeability
Flexural, Longitudinal, Torsional resonance ASTM C666 / BS 1881:209 / NF P18-414 / UNI 9771 / ASTM C215
Surface dampness
Strength evolution  
  • NDT Strength evaluation apparatus
EN 12504-2 / ASTM C805
EN 12504-2 / ASTM C805
Pull-Off (Bond) strength  
  • NDT Strength evaluation apparatus
EN 1015-12 / EN 1348 / EN 1542 / EN 13963 / EN 14496 / ISO 13007-2 / ISO 4624 / ASTM D4541 / ASTM C1583 / ASTM D7522 / ASTM D7234
EN 1015-12 / EN 1348 / EN 1542 / EN 13963 / EN 14496 / ISO 13007-2 / ISO 4624 / ASTM D4541 / ASTM C1583 / ASTM D7522 / ASTM D7234
Pullout force
Microcore method UNI 10766
Quality and omogenety evaluation  
  • NDT Quality and Homogeneity evaluation
EN 12504-4 / ASTM C597
EN 12504-4 / ASTM C597
Cross-Hole testing ASTM D6760
Structural inspection and monitoring BS 1881:206
Crack width  
  • NDT Structural inspection and monitoring
Site evaluation of stress and strength
Deflection of structures
Heat of hydration EN 12390-15
Curing of specimens EN 12390-2 / ASTM C31 / ASTM C192 / ASTM C511
Compression and flexural test
Sample preparation
Water penetration EN 1323
Testing structures
Concrete

Concrete

Auxiliary testing framesAuxiliary testing frames ADAVANTESTADAVANTEST AUTOMAXAUTOMAX NDT – Ultrasonic pulse velocity testerNDT – Ultrasonic pulse velocity tester Automax E-Modulus control console configurationAutomax E-Modulus control console configuration Flexure test frameFlexure test frame
The word concrete comes from the Latin word "concretus" that means compact or condensed; in fact it is well known that since the second century the Romans mixed quicklime with pozzolan to enhance its hydraulic properties and then mixed it with aggregates in order to obtain a robust stone-like material for the construction of roads and structures. Since then the quality and the production technology of concrete strongly evolved hence considerable care supported by knowledge is required to produce quality concrete. Controls, since several years manufacturer leader of testing equipment, proposes a complete range of testing equipment to satisfy practically all the EN and other National Standards. 

NDT
The need to assess the quality and integrity of new buildings and the preservation of historical buildings and monuments, has produced and encouraged modern techniques along with related equipment for non destructive testing, known as NDT. Controls proposes a vast selection of NDT instruments and apparatus with precise indications concerning the product use and the relative applications.




Digital rebound test hammer Compression and flexure machines retrofit AUTOMAX MULTITEST computerized control console
Adiabatic concrete calorimeter Digital readout unit WIZARD 2 Cross-Hole Analyzer for foundation piles Wireless modular version
High stiffness flexural frame, 200 kN cap., SIMPLEX High stiffness flexural frame, 200 kN cap., DUPLEX High stiffness flexural frame, 350 kN cap., SIMPLEX
Carbonation depth determination - CARBONTEST High stiffness flexural frame, 350 kN cap., DUPLEX Specimen grinding machine
Request more info