Verification & Calibration Services
When you buy Controls equipment, you’re buying a precision instrument that has been designed to work in very demanding applications. As part of any preventative maintenance program and in line with National Standards/Quality Assurance requirements, we recommend your equipment should be verified and calibrated annually.

Controls Verification & Calibration (available in some countries). 
Our dedicated Service Team and our global network of Authorized Distributors can provide services of verification and calibration for our equipment, and upon request for equipment from other manufactures. For certain countries and calibrations, we are also able to recommend a local third party to carry out these activities. These include the following main items of equipment (availability to be verified by your Country contact):

  • concrete/cement compression machines
  • geotechnical presses
  • asphalt compactors, DWT,
  • digital load measurement on a wide range of products

Calibration Services – Italy.
Our Headquarters in Italy offers a wide range of calibration services and we have a dedicated team trained to perform verifications of many different types of measurement:

  • Force in accordance with EN ISO 7500-1, EN 12390-4, under our Accreditation with Accredia Laboratory No LAT 092 -> Visit here
  • Mass, displacement, temperature, duration/frequency/speed, pressure due to a wide range of our instruments certified by the National Metrological Centre and strictly in accordance to EN ISO 9001 practices. -> Download the ISO 9001 certificate.

Calibration Services – UK
As a subsidiary laboratory, Controls UK also has the capability to offer a wide range of calibration services and have a dedicated team trained to perform verifications of many different types of measurement:

  • Force in accordance with EN ISO 7500-1, EN 12390-4, under our Accreditation with Accredia Laboratory No LAT 092 -> Visit Here
  • Mass, displacement, temperature, duration/frequency/speed, pressure, hardness, surface texture, pace rates, flatness due to a wide range of our instruments being certified by the National Metrological Centre and strictly in accordance to EN ISO 9001 practices. -> Download the ISO 9001 certificate.
  • The calibration of Nuclear Moisture/Density Gauges to ASTM D6938 using currently calibrated NIST Traceable Calibration blocks (these blocks are calibrated against Primary Blocks every 5 years in accordance with NIST procedures).
Need Support?