close
BUSQUEDA DE PRODUCTO
Resultados para: 'EN 12697-10'
Marshall compaction moulds

Asfalto/mezcla bituminosa - Impact (Marshall) compactors: Marshall compaction moulds

All moulds are made from steel, protected against corrosion. They are specially made for use with the automatic compactor, see \#automatic-marshall-compactors-astm\#. The three parts of the compaction moulds can be purchased individually. See spare parts. Conforming to ASTM D6926 (ex D1559), the compaction...
continuar
Automatic impact (Marshall) compactor, EN

Asfalto/mezcla bituminosa - Impact (Marshall) compactors: Automatic impact (Marshall) compactor, EN

The apparatus automatically compacts the sample and stops after the preset number of blows. The mould is held in position by a quick and practical clamping device. The trip mechanism is arranged so that the sliding hammer falls at the same distance for every blow. The compactor includes the laminate hardwood...
continuar
PAVELAB GYROCOMP, gyratory compactor

Asfalto/mezcla bituminosa - Gyratory compactors: PAVELAB GYROCOMP, gyratory compactor

Introduction Gyratory technique basically consists in a compaction of a bituminous mixture contained in a cylindrical mould with the simultaneous action of a vertical static compaction and of the shearing action resulting from the rotation of the mould on its inclined axis. The compaction data is measured...
continuar
PAVELAB GYROCOMP Research, Gyratory compactor

Asfalto/mezcla bituminosa - Gyratory compactors: PAVELAB GYROCOMP Research, Gyratory compactor

Introduction Gyratory technique basically consists in a compaction of a bituminous mixture contained in a cylindrical mould with the simultaneous action of a vertical static compaction and of the shearing action resulting from the rotation of the mould on its inclined axis. The compaction data is measured...
continuar
Vibrating hammer for P.R.D. specimens

Asfalto/mezcla bituminosa - Vibrating hammer for P.R.D. specimens: Vibrating hammer for P.R.D. specimens

Used for the compaction of Proctor,  CBR soil specimens (see \#vibration-compaction-hammer\#) and P.R.D. Percentage refusal density  test, using the 33-T0087/7 tamping foot  and the 33-T0087/8A Shank. See accessories. Double insulated motor. Plastic trigger handle. The hammer is supplied...
continuar
Internal angle measurement apparatus

Asfalto/mezcla bituminosa - Gyratory compactors: Internal angle measurement apparatus

Introduction The importance of a precise gyratory angle has been widely noted. The measurement of the internal angle represents, in practice, the most accurate method of calibration. This method comprises two individual values: Angle between cylinder and top plate, and Angle between cylinder...
continuar