Controls Group http://www.controls-group.com/images/logo_controls.gif Vebè consistometer Vebè consistometer
close
Hormigón

Vebè consistometer

EN 12350-3 | ASTM C1170
Imágenes
DESCRIPCIÓN GENERAL
DESCRIPCIÓN GENERAL
This test method is used to measure the consistency of stiff to extremely dry concrete. Consistency is measured as the time required for a given mass of concrete to be consolidated by vibrating in a cylindrically shaped mould. The small vibrating table operates at a fixed amplitude and frequency .

Versions available:
  • 54-C0195 conforming to EN 12350-3
  • 54-C0195/A conforming to ASTM C1170 and ASTM C1176 (using the accessory 54-C0195/A1)
  • 54-C0195/B conforming to ASTM C1176

The operating principle is practically identical and the units differ from one to the other in the shape of the container and swivel arm with surcharge weight. The 50 lb (22.7 kg) surcharge weight, which is part of the 54-C0195/A unit (conforming to ASTM C1170), can be replaced by the 20 lb (9 kg) sliding weight conforming to ASTM C1176 (see accessories). Otherwise it's available the equipment conforming to ASTM C1176 supplied along with 20lb (9kg) surcharge weight. In the EN model the weight of the moving part is 2.75 kg.
Más +

Especificaciones Técnicas

  • Dimensions: 
    54-C0195,  260x380x700 (h) mm
    54-C0195/A, 531x431x705 (h) mm
  • Weight approx.: 
    54-C0195, 90 kg
    54-C0195/A, 95 kg

Información para Pedidos

54-C0195
Vebè consistometer conforming to EN 12350-3
230V, 50-60 Hz, 1 ph

54-C0195/Z
Vebè consistometer conforming to EN 12350-3
110V, 60 Hz, 1 ph

54-C0195/A
Vebe' consistometer conforming to ASTM C1170
230V/50Hz/1ph     
                   
54-C0195/AY
Vebe' consistometer conforming to ASTM C1170
220V/60Hz/1ph   
   
54-C0195/AZ
Vebè consistometer conforming to ASTM C1170
110 V, 60 Hz, 1 ph

54-C0195/B
Vebe' consistometer conforming to ASTM C1176
230V/50Hz/1ph     
                
54-C0195/BY
Vebe' consistometer conforming to ASTM C1176
220V/60Hz/1ph 

54-C0195/BZ  
Vebe' consistometer conforming to ASTM C1176    
110V/60Hz/1ph                           


Accesorios

54-C0195/A1 
Slinding weight 20lb (9kg) and mould fixing plate to make C0195/A compliant to ASTM C1176. Mould not included.         

55-C0100/MC15
Steel cylinder mould, dia. 150x300 mm 


Documentos