Controls Group http://www.controls-group.com/images/logo_controls.gif AUTOMAX MULTITEST computerized control console AUTOMAX MULTITEST computerized control console
close
Hormigón

AUTOMAX MULTITEST computerized control console

ASTM C1550 | ISO 6784 | ASTM C469 | DIN 1048 | UNI 6556 | EN 14651 | EN 14488-3 | EN 14488-5 | EN 13412 | EN 13286-43 | ASTM C1609 | EN 12390-13 | BS 1888: 121
PRINCIPALES CARACTERÍSTICAS
  • Suitable for any kind of test from basic failure tests (compression, flexure, splitting, tension) through cyclic tests for elastic modulus and poisson ratio determination up to advanced displacement controlled tests
  • Suitable for any type of sample, can be connected up to 4 frames ranging from 15 kN up to 5000 kN in compression and 500 kN in tension
  • Suitable for any budget: the machine can be upgraded in step-by-step investments by adding suitable testing frames, accessories and dedicated software packages 
  • Suitable for any user: 4 easy-to-use software packages available, each one tailored for a specific test method, guiding the operator through all the test phases
  • Test cycle with closed loop PID control automatically performed by pressing the start button via PC
  • DC-driven variable speed pump for silent operation, energy saving and highly accurate drop-by-drop oil flow for precise control during complex tests
  • 500 Hz high control frequency for optimum oil pressure adjustment during critical tests 
  • Double frame control, expandable to four, with active frame selection via software
  • Soft platen-to-specimen contact and smooth load rate control from very beginning of the ramp

DESCRIPCIÓN GENERAL
DESCRIPCIÓN GENERAL
AUTOMAX Multitest represents a step change in versatility that allows modular upgrades from basic failure tests up to advanced displacement controlled tests.
The system in fact offers step-by-step flexibility to build your testing system to cover possible future testing needs.
The console is supplied with DATAMANAGER software for standard failure tests to EN and ASTM, but with additional frames, accessories and dedicated software packages, your system can easily perform many tests including:
  • Modulus of Elasticity and Poisson Ratio determinations (with optional software package 82-SW/EM)
  • Tension on steel rebar (with optional software package 82-SW/UTS)
  • Displacement controlled tests for FRC/Shotcrete characterization (with optional software package 82-SW/DC)
See Upgrading options

Más +

Especificaciones Técnicas

Hydraulics
  • Dual stage pump: centrifugal low pressure for fast approach and automatic switching to radial multi-piston high pressure for loading
  • DC motor. 720 W, 50-60 Hz
  • Maximum working pressure 650 bar
  • Third and fourth frame option, active frame selection by software
  • Flow-sharing technology to perform loading and unloading cycles
  • ES Energy Saving technology to reduce power consumption and silent operation
Hardware
  • 131.000 points effective resolution
  • High frequency closed-loop P.I.D. control
  • Control frequency 500 Hz                       
  • Sampling rate 500 Hz      
  • 4 channels for load sensors (pressure transducers and load cells)
  • 6 channels to measure strain values with transducers (LVDT, magnetostrictive, potentiometetric)
  • 4 channels for strain measurement with strain gauges
  • Memorization of the calibration curve enables sensors to be connected and used immediately
  • Digital linearization of the calibration curve (multi-coefficient)
PC and software

Main software MULTITEST allows:

  • Remote control of the whole system and automatic execution of test including: fast approaching, zeroing, test execution, numerical and graphical management of test results, etc.   
  • Active frame selection via software  
  • Printing and saving of customized test reports both for single and batch tests in Excel format    
  • Multi-language selection, customizable with a further local language (only latin characters).
  • Automatic load measurement verification procedure including data acquisition and printing of traceable calibration certificates, when the PC is connected to the digital readout unit mod. 82-P0801/E and the suitable load cells
  • the use of 4 software packages each one tailored for a specific test method          
                                
DATAMANAGER software package (included) for compression, indirect tensile, 3 points and 4 points flexural tests on different types of specimens           

E-MODULE software package (optional, see Upgrading Option) for Elastic modulus and Poisson ratio determination allowing: 
  • Free unlimited programmable load/stress cycles to fulfill any kind of test procedure       
  • Real time monitoring of test data, stress/time, stress/axial strain, stress/lateral strain graphs     
  • Automatic verification of sample positioning and sensors functionality, as per standards requirements     
  • Automatic calculation of test results as per Standards requirements
UTS software package (optional, see Upgrading Option) for steel tensile testing allowing:
  • load/stress control
  • crosshead separation control
  • simultaneous display of: stress/elongation [mm], stress/time; stress/elongation [%] and elongation [mm]/time, with possibility to display multi diagrams
  • elaboration of tension test results: ReH, ReL or Rp, final elongation, etc. in conformity to EN ISO 6892-1 (method B) and EN 15630-1 (for steel rebars)

D-Control software package (optional, see Upgrading Option) for displacement controlled tests allowing: 
  • Automatic calculation of test results according to EN 14651, 14488-3, 14488-5, UNI 11039-2, ASTM C1550, C1609, C947, UNE 83515           
  • 8 test pre-set testing procedures according to the above Standards                           
  • Customizable test procedure allowing desired loading history                               
  • Possibility to change in real time the test parameters: target load/displacement, control variable, test speed.                          
Physical specifications

Power rating: 700 W
Dimensions (d x w x h): 650 x 500 x 1350 mm
Weight approx.: 100 kg

Información para Pedidos

50-C20M82
Automax Multitest stand alone power and control console for the control of up to 2 (expandable to 4) testing frames. PC included.
230 V, 50-60 Hz, 1 ph. 

50-C20M84
Automax Multitest stand alone power and control console for the control of up to 2 (expandable to 4) testing frames. PC included.
110 V, 60 Hz, 1 ph.

Actualización

Third frame facility
50-C10D/3F

Upgrading the Automax System for a third frame connection and control. Frame selection via PC        

Fourth frame facility
50-C20E/4F

Upgrading the Automax Multitest consol for a fourth frame connection and control. Frame selection via PC

Software package for elastic modulus determination
82-SW/EM
E-Module software package for determination of young Modulus and Poisson’s ratio on concrete, cement, rocks allowing:
  • User-defined test cycles and step programmable sequences
  • Real-time display of stress/time, stress/axial strain and stress/lateral strain diagrams
  • Automatic verification of sample centring and sensor functioning, as per standards requirements
  • Automatic calculation of test results as per Standards requirements
Software package for tensile tests on steel
82-SW/UTS
UTS software package for steel tensile testing allowing:
  • load/stress control
  • crosshead separation control
  • simultaneous display of: stress/elongation [mm], stress/time; stress/elongation [%] and elongation [mm]/time, with possibility to display multi diagrams
  • elaboration of tension test results: ReH, ReL or Rp, final elongation, etc. in conformity to EN ISO 6892-1 (method B) and EN 15630-1 (for steel rebars)
Software package for displacement controlled test
82-SW/DC
D-Control software package for displacement controlled tests allowing:
  • Automatic calculation of test results according to EN 14651, 14488-3, 14488-5, UNI 11039-2, ASTM C1550, C1609, C947, UNE 83515
  • 8 test pre-set testing procedures according to the above Standards
  • Customizable test procedure allowing desired loading history
  • Possibility to change in real time the test parameters: target load/displacement, control variable, test speed.
  • Data saving rate 250/sec


 

Documentos