Controls Group Sieves, EN, perforated metal plate Sieves, EN, perforated metal plate

Sieves, EN, perforated metal plate

ISO 3310-2
Complete range of full depth testing sieves 200, 250, 300, 315 and 450 mm dia. All frames, except the 450 mm dia. -made of sheet steel- and wire cloth sieves are manufactured from stainless steel. Perforated plates are made from tinned steel. Sieves having the same nominal dia. are designed to nest one in each other. Using 200 mm sieves (8”) is possible to test up to 1000 g of aggregates and 3000 g with 300 mm (12”) dia.
The sieves specifications are clearly marked on the label comprising the serial number  and other information for the identification and traceability of the product as requested  by the international specifications.

Important note
The EN standards specify that: “Sieves with aperture size of 4 mm and above shall be perforated plate square hole test sieves. Below that size they shall be woven wire test sieves”. See Sieves, EN, woven  metal plate
Más +

Información para Pedidos

ISO 3310-2* TEST SIEVES OF PERFORATED METAL PLATE The New European standards also specify that: “Sieves with aperture size of 4 mm and above shall be perforated plate square hole test sieves. Below that size they shall be woven wire test sieves”.

Nominal Code Code Code Code Code
aperture 200 mm dia. 250 mm dia. 300 mm dia. 315 mm dia. 450 mm dia.
4 mm 15-D2550/J 15-D2550/F 15-D3550/J 15-D3550/F 15-D4550/J
4.75 mm 15-D2545/J 15-D2545/F 15-D3545/J 15-D3545/F 15-D4545/J
5 mm 15-D2540/J 15-D2540/F 15-D3540/J 15-D3540/F 15-D4540/J
5.6 mm 15-D2535/J 15-D2535/F 15-D3535/J 15-D3535/F 15-D4535/J
6.3 mm 15-D2530/J 15-D2530/F 15-D3530/J 15-D3530/F 15-D4530/J
6.7 mm 15-D2525/J 15-D2525/F 15-D3525/J 15-D3525/F 15-D4525/J
7.1 mm 15-D2520/J 15-D2520/F 15-D3520/J 15-D3520/F 15-D4520/J
8 mm 15-D2515/J 15-D2515/F 15-D3515/J 15-D3515/F 15-D4515/J
9 mm 15-D2514/J 15-D2514/F 15-D3514/J 15-D3514/F 15-D4514/J
9.5 mm 15-D2510/J 15-D2510/F 15-D3510/J 15-D3510/F 15-D4510/J
10 mm 15-D2505/J 15-D2505/F 15-D3505/J 15-D3505/F 15-D4505/J
11.2 mm 15-D2500/J 15-D2500/F 15-D3500/J 15-D3500/F 15-D4500/J
12.5 mm 15-D2495/J 15-D2495/F 15-D3495/J 15-D3495/F 15-D4495/J
13.2 mm 15-D2490/J 15-D2490/F 15-D3490/J 15-D3490/F 15-D4490/J
14 mm 15-D2485/J 15-D2485/F 15-D3485/J 15-D3485/F 15-D4485/J
16 mm 15-D2480/J 15-D2480/F 15-D3480/J 15-D3480/F 15-D4480/J
18 mm* 15-D2479/J 15-D2479/F 15-D3479/J 15-D3479/F 15-D4479/J
19 mm 15-D2475/J 15-D2475/F 15-D3475/J 15-D3475/F 15-D4475/J
20 mm 15-D2470/J 15-D2470/F 15-D3470/J 15-D3470/F 15-D4470/J
22.4 mm 15-D2465/J 15-D2465/F 15-D3465/J 15-D3465/F 15-D4465/J
25 mm 15-D2460/J 15-D2460/F 15-D3460/J 15-D3460/F 15-D4460/J
26.5 mm 15-D2455/J 15-D2455/F 15-D3455/J 15-D3455/F 15-D4455/J
28 mm 15-D2450/J 15-D2450/F 15-D3450/J 15-D3450/F 15-D4450/J
31.5 mm 15-D2445/J 15-D2445/F 15-D3445/J 15-D3445/F 15-D4445/J
37.5 mm 15-D2440/J 15-D2440/F 15-D3440/J 15-D3440/F 15-D4440/J
40 mm 15-D2442/J 15-D2442/F 15-D3442/J 15-D3442/F 15-D4442/J
45 mm 15-D2435/J 15-D2435/F 15-D3435/J 15-D3435/F 15-D4435/J
50 mm 15-D2430/J 15-D2430/F 15-D3430/J 15-D3430/F 15-D4430/J
53 mm 15-D2425/J 15-D2425/F 15-D3425/J 15-D3425/F 15-D4425/J
56 mm 15-D2426/J 15-D2426/F 15-D3426/J 15-D3426/F 15-D4426/J
63 mm 15-D2420/J 15-D2420/F 15-D3420/J 15-D3420/F 15-D4420/J
75 mm 15-D2415/J 15-D2415/F 15-D3415/J 15-D3415/F 15-D4415/J
80 mm 15-D2416/J 15-D2416/F 15-D3416/J 15-D3416/F 15-D4416/J
90 mm 15-D2410/J 15-D2410/F 15-D3410/J 15-D3410/F 15-D4410/J
100 mm 15-D2402/J 15-D2402/F 15-D3402/J 15-D3402/F 15-D4402/J
106 mm 15-D2405/J 15-D2405/F 15-D3405/J 15-D3405/F 15-D4405/J
125 mm 15-D2400/J 15-D2400/F 15-D3400/J 15-D3400/F 15-D4400/J
Pan and cover 15-D2004/J 15-D2004/F 15-D3004/J 15-D3004/F 15-D4004/J
Pan only 15-D2003/J 15-D2003/F 15-D3003/J 15-D3003/F 15-D4003/J
Cover only 15-D2002/J 15-D2002/F 15-D3002/J 15-D3002/F 15-D4002/J
Frame only 15-D2001/J 15-D2001/F 15-D3001/J 15-D3001/F 15-D4001/J
Receiver/Separator 15-D2000/J 15-D2000/F 15-D3000/J 15-D3000/F 15-D4000/J

*Apertures conforming also to BS and DIN standards.