close
RICERCA PRODOTTO
Risultati per: 'EN 1340'
Data manager PC software

Calcestruzzo - Accessories for Compression Testers: Data manager PC software

Two different DATAMANAGER software are available: 50-C7022/SOF is compatible with MCC and ADVANTEST control consoles and suitable for remote control of the system, data acquisition, processing and filing.  It's included in the supply of the machine. 82-SW/DM is new intuive and smart...
continua
Universal flexural frame, 100-150 kN cap.

Calcestruzzo - Flexural testing frames : Universal flexural frame, 100-150 kN cap.

This versatile flexural frame has been designed to test either standard concrete beams or other concrete products as  the roomy  testing place can accommodate large specimens. It is proposed in two versions: with pressure transducer, 150 kN cap., and with load cell, 100 kN cap., granting high...
continua
Universal flexural frames 150 kN cap., with adjustable vertical clearance

Calcestruzzo - Flexural testing frames : Universal flexural frames 150 kN cap., with adjustable vertical clearance

This versatile flexural frame has been designed to test either standard concrete beams or other concrete products as  the roomy  testing place can accommodate large specimens. Furthermore, the possibility of adjusting the vertical clearance up to 400-500 mm, using the appropriate accessory, permits...
continua
High stiffness flexural frame, 200 kN cap.

Calcestruzzo - Flexural testing frames : High stiffness flexural frame, 200 kN cap.

This high stiffness flexural frame has been especially designed for displacement controlled testing on advanced construction materials, e.g. fiber reinforced concrete (FRC) and sprayed concrete. These tests are significantly affected by the actual frame stiffness therefore the relevant international...
continua
Universal, open structure flexural frame, 300 kN cap.

Calcestruzzo - Flexural testing frames : Universal, open structure flexural frame, 300 kN cap.

UNIFLEX 300 flexural frame has been designed to satisfy the stringent requirements prescribed by the standards concerning, above all, the determination of deformability and ductility index of sprayed concrete and fiber reinforced concrete. The “C” shaped open structure allows an easy and practical...
continua
Böhme abrasion wheel tester

Aggregati - Abrasion testing machines: Böhme abrasion wheel tester

The disc abrader conforming to Böhme method consists of a rotating wheel made of cast iron, 750 mm dia., with a defined test track to receive the abrasive material (white corundum sand) and a no-vibration specimen holder with a two arms lever loading device. The test speciment is clamped with an...
continua
Abrasion testing machine

Aggregati - Abrasion testing machines: Abrasion testing machine

This machine has been developed for determining the resistance to abrasion/wear of natural stones and concrete products. Easy to use, electronic control of the disc speed with auto shut-off of the machine at the selected number of revolutions. The abrasion disk wheel is 70 mm thick. Supplied complete with 5...
continua