close
RICERCA PRODOTTO
Risultati per: 'EN 12390-2'
Rock specimen grinding machine

Meccanica delle rocce - Sample preparation equipment: Rock specimen grinding machine

Used to grind and polish rock and concrete specimens, natural stones, ceramic materials, etc.  Proposed in two versions: 55-C0201/B standard version in which the radial displacement of the grinding head is motor operated and actuated by a push button. 55-C0201/C Automatic version in which...
continua
Vibrating tables

Calcestruzzo - Concrete compaction : Vibrating tables

Robustly manufactured to operate with minimum noise level. 3000 vibrations per minute (3600 at 60 Hz). Retaining edges to avoid the casual fall of the mould from the table. All models can be completed with clamping device and pedal switch (see accessories) except model 55-C0161/LC, LCZ which include the above...
continua
Poker vibrators

Calcestruzzo - Concrete compaction : Poker vibrators

Ideal for the internal compaction of concrete specimens both in laboratory and in site, and a good alternative to the traditional tamping bar especially when there are large number of specimen to be compacted. Three versions available: mains operated  petrol...
continua
Curing tanks

Calcestruzzo - Curing tanks: Curing tanks

Zinc plated steel model 55-C0191 Specimen curing tank, 1000 l cap. galvanized steel, complete with metal base specimen supporting grid. It can be fit with various accessories including: immersion analogic and digital heating systems (55-C0191/10, 55-C0191/11) submersible circulator pump to...
continua
Test set for moist curing rooms

Calcestruzzo - Test set for moist curing rooms: Test set for moist curing rooms

Introduction A suitable curing room of about 150 m3 can be easily assembled using a curing room vaporizer, finned type electric heaters, humidity/temperature sensor and electric control panel. A typical layout of a moist curing room is shown in the sketch a). Each of the following items can be purchased...
continua
Specimen grinding machine

Calcestruzzo - Specimen grinding machine: Specimen grinding machine

Used to grind and polish concrete specimens, natural stones, ceramic materials, etc.  Proposed in two versions: 55-C0201/B standard version in which the radial displacement of the grinding head is motor operated and actuated by a push button. 55-C0201/C Automatic version in which the radial...
continua
Climatic chambers for construction lab

Apparecchiature generiche - Climatic chambers for construction lab: Climatic chambers for construction lab

This advanced climatic chamber is proposed in two versions.
  • 10-D1429 temperature controlled from -30 to 70°C, for testing aggregates conforming to EN 1367-1 and other similar tests on concrete and other construction materials and
  • 10-D1429/A temperature and humidity controlled respectively from -30 to 70°C and from 20 to ≥90% humidity, for aggregates and various other  tests  as for instance concrete and cement specimen curing (EN 12390-2, EN 196-1). Both models can be upgraded with internal data recording facility, data output port and dedicated PC software. See accessory 10-D1429/REC.
For the determination of resistance to freezing and thawing of aggregates the accessory 48-D0457, should be used. See accessories.
continua