close
RICERCA PRODOTTO
Risultati per: 'BS 1377:7'
Field CBR test set and conversion frame for laboratory use

Terre - CBR loading presses: Field CBR test set and conversion frame for laboratory use

CBR test can be performed not only in laboratory but also in-situ. CONTROLS proposes a dual purpose test assembly that, connected to the suitable accessories, can satisfy both needs: for field testing, 34-T0115/A includes all necessary components that, along with vehicle bracket code 34-T0115/9,...
continua
Standard triaxial cells and accessories

Meccanica delle terre - Triaxial Cells : Standard triaxial cells and accessories

The cell essentially consists of a transparent polycarbonate chamber which has a piston assembly fit to the top and a double flange base fit to the bottom.  Three (or six) simple thumbscrew are used to clamp the upper part of the cell to the base, which make assembly and disassembly a very quick and...
continua
Automatic shear testing machine

Meccanica delle terre - Shear testing equipment: Automatic shear testing machine

Shearmatic EmS is a standalone automatic machine with Electromechanic Servoactuation for direct/residual shear testing. It can also automatically perform the oedometric consolidation tests using the dedicated accessories.  It incorporates two high-resolution stepper motors with high precision...
continua
Automatic triaxial tests system - AUTOTRIAX 2

Meccanica delle terre - AUTOTRIAX 2 - Automatic triaxial testing equipment: Automatic triaxial tests system - AUTOTRIAX 2

The AUTOTRIAX 2 is an advanced triaxial testing system that can automatically perform up to 6 entire and independent tests at the same time, from start to finish, without any human intervention. Autotriax 2 can perform different kind of triaxial tests as: - total and effective stress tests as UU...
continua
Triaxial cells for advanced applications

Meccanica delle terre - Triaxial Cells : Triaxial cells for advanced applications

The cell essentially consists of a trasparent banded chamber to prevent excessive expansion during the test and to protect against explosive failure when used with compressed air systems.  The design of the cell ensure vertical alignement of the cell ram by clamping the Perspex wall separately from...
continua
Direct and residual shear testing machine AUTOSHEAR

Meccanica delle terre - Shear testing equipment: Direct and residual shear testing machine AUTOSHEAR

The Autoshear is an automatic machine for direct/residual shear testing. It incorporates a high-resolution stepper motor fitted with a high precision load transfer mechanism. Via the large 6" touch screen colour display the user can start, pause and stop the test, select the data-recording mode, view...
continua
Triaxial load frame TRIAX

Meccanica delle terre - Triaxial load frames: Triaxial load frame TRIAX

WYKEHAM FARRANCE’s electro-mechanical TRIAX - triaxial machine - has been designed specifically for triaxial applications and is ideal for commercial laboratories that need a versatile machine capable of performing a wide range of tests.   The load frame is built around a robust twin column...
continua
Triaxial load frame TRITECH

Meccanica delle terre - Triaxial load frames: Triaxial load frame TRITECH

WYKEHAM FARRANCE’s electro-mechanical TRITECH machines are the original high-performance load frames for triaxial tests. Introduced by the company over 50 years ago, they have undergone continuous development and are the ideal solution for advanced and research laboratories that want to perform high...
continua
Digital shear testing machine

Meccanica delle terre - Shear testing equipment: Digital shear testing machine

This test cover the determination of the consolidated drained shear strength of a soil material in direct shear. The Digishear machine, with digital control and display of speed, is driven by a high resolution stepper motor and worm reduction unit. Can accommodate all standard specimens up to 10 cm square and...
continua
Triaxial load frame TRIAX with 4 built-in channels

Meccanica delle terre - Triaxial load frames: Triaxial load frame TRIAX with 4 built-in channels

WYKEHAM FARRANCE’s electro-mechanical TRIAX 4C is the ideal solution for commercial laboratories who require a versatile stand-alone machine, able to perform high quality triaxial tests in addition to unconfined and general purpose compression tests with superior perfomance. The load...
continua
Triaxial load frame TRITECH with 4 built-in channels

Meccanica delle terre - Triaxial load frames: Triaxial load frame TRITECH with 4 built-in channels

WYKEHAM FARRANCE’s electro-mechanical TRITECH machines are the original high-performance load frames for triaxial tests. Introduced by the company over 50 years ago, they have undergone continuous develop­ment and are the ideal solution for advanced and research laboratories that want to perform...
continua
Shear box assemblies

Meccanica delle terre - Shear testing equipment: Shear box assemblies

These shear box assemblies are designed to be used with our 27-WF2060 Digishear, 27-WF2160 Autoshear and 27-WF2180 Shearmatic shear testing machines. Manufactured from brass and designed to contain the water that surrounds the specimen. They consist of a square box with a rigid walled round or square hole...
continua
Triaxial test automatic control and processing softwares - AUTOTRIAX 2

Meccanica delle terre - AUTOTRIAX 2 - Automatic triaxial testing equipment: Triaxial test automatic control and processing softwares - AUTOTRIAX 2

The AUTOTRIAX 2 software is a comprehensive and user-friendly interface between the operator and the testing system.  Installed on a PC communicating with the system over a fast Ethernet connection, the software can be used to configure the system(s), calibrate transducers, specify test parameters, set...
continua
Large shear testing machine

Meccanica delle terre - Shear testing equipment: Large shear testing machine

The SHEARMATIC 300 automatic machine is ideal for testing geosyntetics and also soil and other materials that contain large particles of up to 20 mm largest dimension.  Sample size up to 300 mm square can be tested, with inserts allowing the testing of smaller sample sizes. See accessories. The sample...
continua
Laboratory vane apparatus

Meccanica delle terre - Shear testing equipment: Laboratory vane apparatus

The laboratory vane apparatus is based on a original concept of the Transport and Road Research Laboratory of the United Kingdom. It can be provided with a wide range of vane sizes, although as standard, it is sold with the 12.7 mm square vane and a set of four calibrated springs. The test can be performed...
continua
Bromhead ring shear apparatus

Meccanica delle terre - Shear testing equipment: Bromhead ring shear apparatus

Introduction The Torshear machine is dedicated to the determination of the residual shear strength. The residual shear strength of soils is sometimes also termed the ultimate shear strength. This is the strength of soil when it is sheared to large displacements, for example along the failure plane of a...
continua
Dynamic electromechanical triaxial systems DYNATRIAX

Meccanica delle terre - Dynamic triaxial systems: Dynamic electromechanical triaxial systems DYNATRIAX

Dynatriax EmS benefits from CONTROLS Group new EmS "Electromechanical Servoactuation" technology. EmS technology is environmentally friendly and clean to operate, requiring no compressed air or hydraulic oil. It offer excellent reliability, accurate testing and lower maintenance requirements. The...
continua