close
RICERCA PRODOTTO
Risultati per: 'BS 1377:4'
PC software for CBR, Marshall, Indirect tensile and Universal tests

Apparecchiature generiche - PC softwares: PC software for CBR, Marshall, Indirect tensile and Universal tests

This program is written to run in MS Windows® for data acquisition and processing of CBR, Marshall, Indirect tensile and generally of load/displacement tests. The software is designed to be used specifically with new Digimax touch 76-P60R02,  with 76-B3802 and with 34-V1172, 70-T1082, 70-T1182 and...
continua
CBR equipment, BS version

Terre - CBR apparatus: CBR equipment, BS version

This method is used for the laboratory evaluation of subgrade and subbase coarse materials in road construction. To perform this type of test, we propose moulds with various accessories listed in the table below and manual compaction rammers. Different models are available conforming to the various...
continua
Hand operated CBR loading press

Terre - CBR loading presses: Hand operated CBR loading press

The machine feature a rigid two column frame with upper crossbeam, which can be adjusted in height and locked in position with locknuts. The drive force is provided by a mechanical jack housed in the base cabinet. The machine include a precision load ring, 50 kN cap., penetration piston and dial gauge. The...
continua
Universal load frames accessories for soil, asphalt, concrete, cement, mortar and rock testings.

Macchine universali/acciai - UNIFRAME automatic stand-alone universal compression/flexural tester : Universal load frames accessories for soil, asphalt, concrete, cement, mortar and rock testings.

50 and 100 kN load frames (motorized or hand operated) are suitable for a wide range of tests on different kind of materials. Each test requires a list of accessories depending on the type of test and on the reference standard. View odering information to select the list of accessories suitable for each...
continua
CBR motorized loading press

Terre - CBR loading presses: CBR motorized loading press

The machine feature a rigid two column frame with upper crossbeam, which can be adjusted in height and locked in position with locknuts. The drive force is provided by a mechanical jack housed in the base cabinet which also accomodates the motor and the electric panel. The machine include a precision load...
continua
Soil extruder,hand operated

Terre - Sample preparation : Soil extruder,hand operated

This hydraulic extruder can accommodate standard U4 tubes and a range of adaptors to extrude soil samples 35, 38, 101.6, 106 and 152.4mm dia. It can also be used to remove Marshall, Proctor and CBR specimens. Appropriate accessories and adaptors are available and have to be ordered separately. See...
continua
Universal Proctor/CBR automatic compactors

Terre - Automatic Proctor-CBR compactors: Universal Proctor/CBR automatic compactors

The automatic compactor provides a fully automatic and uniform compaction of specified effort, thus ensuring repeatable test results and eliminating any operator fatigue during the tests. Conforming to all the above and other major International Standards, designed for moulds 100 to 102 and 150 to 152.4...
continua
Proctor moulds and rammers, BS

Terre - Proctor compaction: Proctor moulds and rammers, BS

Used for determining the relationship between the moisture content and density of compacted soil. The mould includes collar, mould body and base plate. The rammer construction includes a guide sleeve with vent holes. Different versions are available that conform to the various commonly used standards....
continua
Moisture condition apparatus

Terre - Moisture content determination equipment: Moisture condition apparatus

Used in the assessment of earthworks for construction by comparison of compaction characteristics at various moisture contents, to determine  “Moisture condition value” and “Chalk crushing value”. This robust apparatus is designed for use in the construction laboratory and...
continua
Universal specimen extruder

Terre - Sample preparation : Universal specimen extruder

Used to remove 4” (101.6 mm), 6” (152.4 mm), 100 mm, 150 mm diameter specimens from Proctor, CBR and Marshall moulds. Steel structure with adapters that can be easily fit conforming to the mould diameter. Capacity: 50 kN Maximum ram stroke: 197 mm (ram) + 68 mm...
continua
MULTISPEED automatic universal tester with touch screen digital speed control and data acquisition

Terre - CBR loading presses: MULTISPEED automatic universal tester with touch screen digital speed control and data acquisition

The new automatic MULTISPEED 34-V1172 is a versatile stand-alone machine; an ideal solution for road testing laboratories and generally for any test that requires displacement/speed control. The 50kN capacity and fully variable speed of 0.05 to 51 mm/min make it possible to perform not only CBR and...
continua
MULTISPEED digital automatic universal tester for displacement controlled tests

Terre - CBR loading presses: MULTISPEED digital automatic universal tester for displacement controlled tests

The new MULTISPEED compression tester is the ideal solution for Road testing laboratory. The 50 kN capacity and the fully variable test speed of 0.2 to 51 mm/min make it possible to perform not only the CBR and Marshall tests, but many other applications as for instance Indirect Tensile test,  Quick...
continua
Vibration compaction hammer

Terre - Vibration compaction hammer: Vibration compaction hammer

Used for the compaction of Proctor and CBR soil specimens. Using the appropriate tamping foot it can also be used for compacting asphalt in the “Percentage refusal density test”. See Vibrating hammer for P.R.D. specimens. Double insulated motor. Plastic trigger handle. The hammer is supplied...
continua