close
RICERCA PRODOTTO
Risultati per: 'BS 1377:2'
Liquid limit penetrometers

Terre - Atterberg Limits : Liquid limit penetrometers

The cone penetrometer apparatus is used to determine the moisture content at which clay soils pass from a plastic to a liquid state and it is used also for the determination of undrained shear strength (CEN ISO/TS 17892-12). Two versions available: the standard 22-T0029/D and the semi-automatic...
continua
Mortar and pestles

Apparecchiature generiche - Porcelain and various: Mortar and pestles

continua
Particle size analysis set: Pipette method

Terre - Particle size analysis equipment: Particle size analysis set: Pipette method

Used for determining the particle size distribution of very fine soils. Basic items to perform the test are the 22-T0062/1 Andreasen pipette which is hold by the 22-T0062/2 Pipette stand for raising or lowering precisely the pipette to the required level without disturbing the suspension under test. The...
continua
Liquid limit devices (Casagrande)

Terre - Atterberg Limits : Liquid limit devices (Casagrande)

Used to determine the moisture content at which clay soils pass from a plastic to a liquid state. Comprises: removable brass cup, adjustable crank and cam mechanism, blow counter, and base. Different  versions are available conforming to the various Standards in use. They are identical in shape and...
continua
End-over-hand Shaker

Terre - Particle size analysis equipment: End-over-hand Shaker

Used for determining the particle density of soils by the Gas Jar method. This method applies for soils containing up to 10% of particles retained on a 37.5 mm sieve. Consisting essentially of a motor speed reducer which rotates two clamps which holds the Gas jars 22-D1132 (see accessories). -Weight...
continua
Linear shrinkage mould

Terre - Atterberg Limits : Linear shrinkage mould

Used for determining the linear shrinkage and indication of the plastic properties of soils with low clay content. Made from brass, 140 mm long, 12.5 mm radius. Weight approx.: 300 g
continua
Mortar and rubber pestle

Terre - Sample preparation : Mortar and rubber pestle

Used to gently crush individual particles for chemical tests. Total weight approx.: 1 kg
continua
Plastic limit set

Terre - Atterberg Limits : Plastic limit set

Used for determining the lowest moisture content of a soil at which the sample can be rolled into little rolls, 3 mm dia., without breakages. The set includes: 22-T0040/1  Plastic limit plate, 300x300 mm 22-T0040/2  Stainless steel rod 3 mm dia. 86-D1171  Mixing dish 120 mm...
continua
Pyknometer with conical screw cap

Aggregati - Pyknometer with conical screw cap: Pyknometer with conical screw cap

Glass jar supplied complete with non corrodible cone and rubber seal. Capacity 1 kg. Weight approx.: 500 g
continua
Gay-Lussac specific gravity bottles

Terre - Gay-Lussac specific gravity bottles: Gay-Lussac specific gravity bottles

The determination of the specific gravity and density of fine soils is developed through three different operations: the sample, introduced in the specific gravity bottle, has to be thermostatically normalized by immersion in a suitable water bath complete with Adjustable tray and Cover with cooling coil (see...
continua