Controls Group http://www.controls-group.com/images/logo_controls.gif Pressure transucers for triaxial test Pressure transucers for triaxial test
close
Meccanica delle terre
Share

Pressure transucers for triaxial test

Richiesta preventivo
chiudi
Stampa la pagina
PRESTAZIONI PRINCIPALI
Pressure transducer (28-WF630X) with de-aring block (28-WF6310) Pressure transducer (28-WF630X) with de-aring block (28-WF6310) Pressure transducer (28-WF630X) with de-aring block (28-WF4459) Pressure transducer (28-WF630X) with de-aring block (28-WF4459) Pressure transducer (28-WF630X/A) with de-aring block (28-WF6310) Pressure transducer (28-WF630X/A) with de-aring block (28-WF6310) Pressure transducer (28-WF630X/A) with de-aring block (28-WF4459) Pressure transducer (28-WF630X/A) with de-aring block (28-WF4459)
  • Used for the measurement of cell pressure, back pressure, pore pressure (water or air).
  • Outstanding performance and stability 
  • Good accurancy 
  • Ranges from 0  to 1000, 2000, 3500 kPa depending on the model
DESCRIZIONE GENERALE
DESCRIZIONE GENERALE

Pressure transducers are used for the measurement of cell pressure, back pressure, pore pressure (water or air).They have to be connected to triaxial cells by the suitable De-airing block. See accessories.
The transducers are base on the extensimetric measurement principle with strain gauges on the metal base. 
Two series are available according to the compatibility with the machine, please refer to the technical specification and transducers compatibility table below. 
Altro +

Caratteristiche tecniche

Code  28-WF630X  28-WF630X/A
Input voltage 1-10 1-10 
Output voltage 10mV/V 1.5 mV/V
Resolution  infinite infinite 
Accuracy  ±0.25 FSO  ±0.25 FSO 
Temperature [°C] -40 to +85 -40 to +105
Temperature effect*[FS/°C] ±0.015%  ±0.01%
Removable cable  No Yes
Dimensions** [lenght x dia.]  5.8 x 2.55 15.2 x 2.7
Weight [g] 100 130

Where:

X = 0 : 1000 kPa
X = 1 : 2000 kPa  
X = 2 : 3500 kPa 

* Typical thermal zero and span coefficients
** nipple included 


Informazioni per l'ordinazione

28-WF6300
Pressure transducer 0-1000 kPa, not compatible with AUTOTRIAX 2 and Load frames four built-in channels ( see model 28-WF6300/A)
 
28-WF6301
Pressure transducer 0-2000 kPa, not compatible with AUTOTRIAX 2 and Load frames four built-in channels ( see model 28-WF6301/A)
 
28-WF6302
Pressure transducer 0-3500 kPa, not compatible with AUTOTRIAX 2 and Load frames four built-in channels ( see model 28-WF6302/A)
 
28-WF6300/A
Pressure transducer 0-1000 kPa, not compatible with DYNATRIAX ( see model 28-WF6300)
 
28-WF6301/A
Pressure transducer 0-2000 kPa
 
28-WF6302/A
Pressure transducer 0-3500 kPa

NOTE: in case the pressure transducer is supplied complete with data acquisition system, then a traceable calibration certificate is avilable on request. For ordering add the suffix 'C' to the relevant product code ( e.g. 28-WF6302/C)

Accessori

28-WF6310 
De-airing block for connection to Banded triaxial cells, for pore pressure measurement.

28-WF4459 
De-airing block for connection to Standard  triaxial cells, for pore pressure measurement.

Informazioni Aggiuntive

Pressure transducers compatibility table 

Model  Autotriax 2 Dynatriax Geodatalog 8 Geodatalog 8 Datalog 8 Triaxial load 4 channels Readout unit 28-WF4450 Readout unit 28-WF4450/A
28-WF6300   X X X X   X  
28-WF6301     X X X   X  
28-WF6302     X X X   X  
28-WF6300/A X   X X X X   X
28-WF6301/A X   X X X X   X
28-WF6302/A X   X X X X   X

Documenti