Controls Group http://www.controls-group.com/images/logo_controls.gif Direct and residual shear testing machine AUTOSHEAR Direct and residual shear testing machine AUTOSHEAR
close
Meccanica delle terre

Direct and residual shear testing machine AUTOSHEAR

ASTM D3080 | AASHTO T236 | BS 1377:7 | CEN-ISO/TS 17892-10 | NF P94-071
PRESTAZIONI PRINCIPALI
  • User interface 6" touch screen colour display for numerical and graphical plotting of the readings
  • Maximum horizontal force: 5 kN
  • Maximum vertical force: 5 kN, using the 10:1 cantilever device
  • Three analogue channels. one for load cell and two for displacement transducers
  • Effective channel resolution: 131,000 points
  • Infinitely variavle speed from 0.00001 to 15.0000 mm/min
  • High stiffness load chain shear box - driving head - load cell
  • Compatible with shear boxes up to 100 mm diameter or square
  • USB pen drive for unlimited storage capacity and TXT format data output
  • Optional PC control via LAN port and dedicated software
  • Sturdy shear box techno-polymeric carriage untouchable by corrosion
  • Adjustable speed and travel (forward and reverse) for residual shear test
  • Number of cycles adjustable from 1 to 99
  • Specific and independent data recording for consolidation and failure stages
DESCRIZIONE GENERALE
DESCRIZIONE GENERALE
The Autoshear is an automatic machine for direct/residual shear testing. It incorporates a high-resolution stepper motor fitted with a high precision load transfer mechanism.
Via the large 6" touch screen colour display the user can start, pause and stop the test, select the data-recording mode, view the readings and the diagrams during the test execution and carry out the transducers calibration (load cell and two displacement transducers).
The axial transmission of the horizontal force adopts a straight connection through shear box, shaft and load cell. This design avoids the load measurement inaccuracies occurring with the widely used "swan neck" basic design.
A high quality techno-polymeric material has been adopted for the carriage of the shear box, offering excellent resistance to corrosion, wear and tear and to the chemicals often mixed with the soil specimens.
Furthermore, this polymeric carriage is lightweight and easy to clean.
Vertical load is applied directly to the specimen via a loading yoke and a weights holding arm which amplifies 10 times the applied value.
Load cell and displacement transducers, weight and shear box assembly shall be ordered separately (see accessories).
Load ring and dial gauge are also suitable for manual recording.
Altro +

Caratteristiche tecniche

  • Maximum shear force: 5000 N
  • Maximum vertical load: 500 N or 5000 N using 10:1 cantilever loading device supplied with the machine
  • Maximum horizontal travel: 23 mm
  • Test speed: from 0.00001 to 15.00000 mm/min
  • Maximum number of cycles: 99
  • Sample type and size: up to 100 mm square or round
  • Overall dimensions: 1040 x 530 x 1200 mm (l x d x h)
  • Weight approx.: 60 kg
  • Multivoltage: Multifrequency power supply 230 V, 50 Hz or 110 V, 60 Hz

Informazioni per l'ordinazione

27-WF21A60 
Autoshear, direct and residual shear testing machine with automatic built-in data acquisition
100-220 V, 50-60 Hz, 1 ph

Accessori

Electronic measuring device

Load cell
27-WF0377/ST

Load cell 5 kN capacity, with adapters


Displacement transducers
30-WF6207

Linear potentiometric transducer, 10 mm travel, for vertical deformation, complete with mounting block

30-WF6208
Linear potentiometric transducer, 25 mm travel, for horizontal deformation, complete with mounting block


Shear box: loading pad, base plate, 2 plain grid plates, 2 perforated grid plates and 2 sintered bronze porous stone
Code 27- WF0215/B WF0216/B WF0217/B WF0218/B WF0219/B WF0222/B
Shape Square Square Round Round Round Round
Sample size [mm] 60 100 50 60 63.5 100
Sample cutter 27- WF0215/B7 WF0216/B7 WF0217/B7 WF0218/B7 WF0219/B7 WF0222/B7
Extrusion dolly 27- WF0215/8 WF0216/8 WF0217/8 WF0218/8 WF0219/8 WF0222/8


Weight set
27-WF0230/C3

Weight set 37.5 kg comprising: 2x0.25, 2x0.5, 2x1, 3x2, 3x4 and 2x8 kg weights 

Additional weight set
27-WF0230/C4

Weight set 34 kg comprising: 2x1, 1x2 and 3x10 kg weights


Data process template
30-WF6016/T2

Direct and residual shear Geo-Analysis template conforming to BS 1377:7

30-WF6016/T9
Direct and residual shear Geo-Analysis template conforming to ASTM D3080

Documenti