Controls Group http://www.controls-group.com/images/logo_controls.gif Constant Rate of Strain cell (CRS) Constant Rate of Strain cell (CRS) 26-WF0360/A; 26-WF0360/AS; 26-WF360/AD
close
Meccanica delle terre

Constant Rate of Strain cell (CRS)

  • Download:
ASTM D4186
PRESTAZIONI PRINCIPALI
DESCRIZIONE GENERALE
DESCRIZIONE GENERALE
This cell is used to measure the magnitude and rate‐of‐consolidation of saturated cohesive soils using
continuous controlled‐strain axial compression. The specimen is restrained laterally and drained axially to one surface. The axial force and base excess pressure are measured during the deformation process.
Controlled strain compression is typically referred to constant rate‐of‐strain (CRS) testing.
The test is performed using Constant Rate od Strain cell and other equipment including
Triaxial frame, Pressure system, Data acquisition and processing system and other accessories. 
It can be use in a standard system with manual control ( automatic or manual acqusition) or in a automatic control and data acqusition using a dedicated activation code. 

Three different different model are available: 
  • Constant rate of Strain (CRS) suitable for external load cell 
  • Constant rate of Strain (CRS) suitable for submersible load cell 
  • Adapter for triaxial cell model 28-WF4070 
Altro +

Caratteristiche tecniche


  26-WF360/A 26-WF360/AS 26-WF360/AD
Stand Alone  yes yes Adaptor for
28-WF4070
Specimen size
diameter x height [mm]
63.5 x 25.4 
Maximum working pressure [kPa]  3500 
Number of valves
3
 
Air vent  yes


Informazioni per l'ordinazione

26-WF0360/A
CRS - Constant Rate of Strain cell model suitable for external load cell
 
26-WF0360/AS
CRS - Constant Rate of Strain cell model suitable for submersible load cell 

26-WF0360/AD
Adaptor for trixial cell model 28-WF4070 to perform  Constant Rate of Strain test 
 

Accessori

26-WF0360/1
 Cutting ring and accessories for preperation of  CRS sample                                       

Documenti