Controls Group http://www.controls-group.com/images/logo_controls.gif Universal asphalt and concrete saw, MULTISAW Universal asphalt and concrete saw, MULTISAW
close
Asfalto/miscele bituminose

Universal asphalt and concrete saw, MULTISAW

A unique machine specifically designed for laboratory use to precisely cut Asphalt, Concrete and Rock samples

PRESTAZIONI PRINCIPALI
  • Specifically designed to fulfill the stringent requirements of the relevant Standards in terms of precision, planarity and perpendicularity of the specimens.
  • High rigidity and stability
  • Slab and prism of any shape and dimensions can be sawn without additional accessories (see table for maximum dimensions)
  • Jig for round cores, from 100 to 150 mm and for 200 mm dia, length up to 300 mm
  • Unique clamping mechanism for cylindrical specimens minimizes specimen damage. Use of a sacrificial PVC tube produces a superior finish and minimizes edge chipping of asphalt samples
  • Easy spacer system allows precise preparation of beams or cores
  • Manual advance and retraction of saw blade to home position
  • Motor mounted on twin chrome-plated steel rails with sealed bearings
  • Also suitable for concrete and rock samples
DESCRIZIONE GENERALE
DESCRIZIONE GENERALE
The cutting machines proposed in the market are normally standard saws for field use in the building industry, modified to clamp and to cut samples. They do not assure the rigidity and stability to obtain precisely specimens for laboratory use. For this reason we have designed and produced specifically designed Asphalt saws to fulfill the stringent requirements of the relevant Standards and, consequently, of the Research and Central laboratories. 

Multisaw is a universal sawing system for fast, accurate cutting of beams from prisms and  for trimming cylinders. An easy-to-use spacer system sets the specimen position and allows beams or cores to be cut without the need for measurement. The saw blade advances and retracts to the home position by a user-friendly hand wheel.

The Multisaw includes the multislab jig, complete with table and manual clamping device for slabs, water pump for cooling the blade. Completed with the suitable accessory, it can be used to cut also cores at the desired length. It can be fitted with 650 mm dia. blade with a maximum cutting depth of 200 mm and prism length of 500 mm (extendable to 700 mm, on request).

The Multisaw allows an easy-to-use sawing system for accurate cutting of beams for asphalt prisms to be used for Four Point Bending Beam tests, Two Point Bending Beam tests, TSRST, Texas Overlay Test, Prall Test, Semi-Circular Bend Test, Wheel Tracking Tests with large and small devices, or any concrete beam or cylinder. The system allows cylindrical cores with diameter from 100 to 150 mm, and 200 mm dia. to be quickly and accurately cut to different lengths from 10 to 300 mm.

Altro +

Caratteristiche tecniche

Blade diameter     650 mm
Max cutting depth 200 mm
Cores* 100 or 150 mm
Prism length* Max 500 mm
Accuracy Length, perpendicularity and flatness +/-1% max. according to Standards
Blade speed 1400-1680 rpm (50/60 Hz)
Cooling Water recirculation pump and tank (included)
Power supply 5 kW
Voltage 400 V, 50 Hz, 3 ph or 220 V, 60 Hz, 3 ph
Dimensions (l x w x h) 2000 x 800 x 1700 mm
Weight approx.  450 kg
*Models suitable for cores 38 to 200 mm dia. and prisms up to 700 mm, available on request

Informazioni per l'ordinazione

77-PV47005
MULTISAW,  asphalt saw, complete with multi-slab jig. Blade not included. 400V/50/3ph
    
77-PV47006
As above but 220 V, 60 Hz, 3 ph.

Accessori

77-PV47000/1
Diamond blade 650 mm dia.

77-PV47000/2
Sacrifical PVC tube for 100 mm dia. core (consumable)

77-PV47013
Manual core locking Jig for round cores, 100 to 150 mm diam., to cut samples with manual feeding, from 10 to 300 mm length.
 
77-PV47015
Manual core locking Jig for round cores, 200 mm diam., to cut samples with manual feeding, from 10 to 300 mm length.
 
77-PV47020
Trapezoidal specimens jig to be used in Two Point Bending Test, according to EN 12697-24 and 26.
 
77-PV47025
Jig for Semi-Circular Bending Tests according to EN 12697-44 (except for the notch), and for Disk Shaped Compact Tension Sample according to ASTM D7313. Notch and holes not included. 77-PV47011 or PV47013 is also required.
 
77-PV47030
Jig for Texas Overlay Test according to TX-248-F. 77-PV47011 or PV47013 is required.

Informazioni Aggiuntive

  • Cutting of prisms and slabs to be used in Four Point Beam Bending tests according to EN 12697-24D and 26B and AASHTO T321
  • Cutting of trapezoidal specimens to be used in Two Point Beam Bending tests according to EN 12697-24A and 26A
  • Cutting AMPT cylindrical specimens round cores
  • Cutting TSRST specimens according to EN 12697-46 and AASHTO TP10
  • Cutting and dressing of Wheel Tracking slabs or cores according to EN 12697-22 and AASHTO T324
  • Cutting Prall test specimens according to EN 12697-16
  • Cutting Overlay test specimens according to TX-248-F
  • Cutting Semi-Circular Bend test specimens according to EN 12697-44 (except for the notch)
  • Cutting concrete slabs and cylinders
  • Cutting accurately 100, 150 and 200mm dia. cylindrical cores to different lenghts. 

Documenti