Controls Group http://www.controls-group.com/images/logo_controls.gif Modular Servo Hydraulic Asphalt Tester AST Pro Modular Servo Hydraulic Asphalt Tester AST Pro
close
Asfalto/miscele bituminose

Modular Servo Hydraulic Asphalt Tester AST Pro

PRESTAZIONI PRINCIPALI
  • Brand new technology ihcluding the new revolutionary E-Mech Servo-electromechanical actuator
  • Easy and versatile with his fully integrated modular system, that includes a 19 kN capacity hydraulic labyrinth actuator
  • Enhanced environmental cabinet that grants a wide temperature range with fast and accurate temperature control
  • Easy-to-use and ergonomic testing system
  • Clarity in results with the Integrated Multi Axis Control System (IMACS)
  • Fully integrated and very compact in design, a perfect solution for both static and mobile testing facilities
  • Optional air compressor that comes integrated in the machine
  • All-in-one touchscreen PC (optional)

E-Mech technology's main benefits:
  • Improved dynamic performance over servo-pneumatics
  • Stand-alone with no need of compressed air supply
  • Lower maintenance
  • Robust and durable giving a more resilient solution
  • Compact design requiring, in general, a smaller footprint
  • Easy to use
DESCRIZIONE GENERALE
DESCRIZIONE GENERALE
The AST Pro belies the power and versatility if this fully integrated modular system. AST Pro is based on the tried and tested technology of the AMPT Pro and its high performance servo-hydraulic labyrinth bearing actuator.

Now you can perform all the most common asphlt test standards in one high performance, compact, modular, easy-to use machine.

AST Pro allows to perform a wide range of tests, including the ones compatible qith AMPT Pro (permanent deformation, cyclic compression, indirect tensile stiffness, indirect tensile fatigue, crack propagation, direct tension-compression, dynamic/complex modulus) plus triaxial compression, four-point and two-point stiffness and fatigue flexural tests.
Altro +

Caratteristiche tecniche

  • Load capacity: Static 19 kN, Dynamic 17 kN
  • Frequency range: 0.01 to 70 Hz sinusoidal loading
  • Actuator stroke: 30 mm (+/- 15 mm stroke)
  • Actuator type: labirinth bearing
  • Specimen size (dia x H): 100 x 150 nominally, 50 x 135, 38/50 x 110 mm
  • Temperature range: 4 to 60° C*
  • Cooling rate: ....
  • Temperature accuracy: +/- 0.5° C
  • Environmental cabinet dimensions (w x d x h): ...... mm
  • Noise level less than 70 db at 2m
  • Computer control: integrated all-in-one touch screen PC (optional)
  • Air compressor and dryer: low noise, integrated, automated operated-on-demand (optional)
  • Dimensions (w x d x h): .... x 1350 x 740 mm
  • Weight:: .... kg (including oil)
  • Easy interchangeable load cells
* At temperature probe positioned close to the specimen

Transducers
  • Load cell: low profile pancake type
  • Built-in actuator LVDT: 30 mm stroke ...
  • Plug-and-Play: up to 8 channels ....

Services
  • Power without air compressor: 220-240 V, 50 Hz, single phase, 9 A; 208 V, 60 Hz, single phase, 11 A
  • Power with air compressor: 220-240 V, 50 Hz, single phase, 13 A; 208 V, 60 Hz, single phase, 16 A
  • Air: Clean dry air at 450-800 kPa; 2 L/sec (optional integrated air compressor available)
  • Hydraulic oli: pre-filled with high specification pre-filtered, ISO 46 Premium Mineral Oil

Informazioni per l'ordinazione

79-PV72A12
AST Pro, modular servo hydraulic asphalt tester, complete with 19 kN static/17 kN dynamic labyrinth actuator, 20 kN load cell, 30 mm actuator LVDT and IMACS.
208-230 V, 50-60 Hz, 1 ph 

Accessori

Environmental chambers for AST Pro and AsphaltQube 
79-PV72E12

Environmental chamber, 0 to 60° C.
240 V, 50-60 Hz, 1 Ph

79-PV72E14
Environmental chamber, 0 to 60° C.
110 V, 60 Hz, 1 Ph


Reaction frame
79-PV72001

Reaction frame kit

79-PV71000 
All-in-one touch screen PC

79-PV71001
Integrated compressor assembly, max air flow 137 l/min, 8 Bar cap., 5 litres tank, with air dryer with molecular server.
220 V, 50 Hz, 1 ph

Informazioni Aggiuntive

IMACS Digital Controller and Data Acquisition System

IPC Global's world leading IMACS digital controller and data acquisition system is at the heart of all our servo-controlled testing systems. It provides excellent waveform fidelity from integrated channel acquisition and control functions, at speeds of up to 5 kHz simultaneously on all channels.
The IMACS utilizes flash-based firmware which allows updates of all modules onsite. Analogue inputs auto-calibrate on power-up giving confidence in readings and a low data noise performance with over-sampled data.
With up to 8 expandable control axes and 32 data acquisition channels, you can have total confidence in your testing results. It has an exceptional data resolution and control with up to 20 bit effectiive auto-ranging data acquisition and a real-time digital computer control with 32 bit processing.
Three versions are available: for Servo-Hydraulic, Servo-Pneumatic and Servo-Electromechanical systems.


UTS Software

IPC Global's powerful and professional UTS Software draws upon over 30 years of advanced materials testing experience. IPC Global's test and control software is known for its simplicity in use, clarity of results and analytical power.
It was developed from expert knowledge of applications to run automated test routines and therefore speeds up testing. It is written in powerful, professional Delphi and features real-time graphs for monitoring the specimen under test; portable binary data files or sharing, reviewing and analysis; and "live" transducer levels display.
The purpose-built UTS applications have dialogue help boxes for automated test routines and easy-to-read graphic screens for test set up and reviewing. The test is totally programmable from the user.

Documenti