Controls Group http://www.controls-group.com/images/logo_controls.gif Advanced Automated Asphalt Saw, AUTOSAW II Advanced Automated Asphalt Saw, AUTOSAW II
close
Asfalto/miscele bituminose

Advanced Automated Asphalt Saw, AUTOSAW II

  • Download:
PRESTAZIONI PRINCIPALI
  • Touch screen CPU control allows for easy set-up including carriage speed and retraction sequence
  • Intelligent system with adjustable limit switches allow for repetitive cuts with minimal carriage overtravel saving time
  • Protection cabinet with several automatic locking access doors to ensure unparalleled safety and clean operation in laboratory environments.
  • Slab and prism of any shape and dimensions can be sawn without additional accessories (see table for maximum dimensions)
  • Pneumatic clamping of prisms and cores
  • Compressed air gun for cleaning specimens and sawing system
  • Easy spacer system allows precise preparation of beams or cores
  • Automatic advance and retraction of saw blade to home position
  • Adjustable cutting speed for optimum specimen finish and throughput
  • Numerous interlocks to ensure operator safety
  • Motor features dynamic braking to immediately stop while switched off
  • Motor mounted on twin chrome-plated steel rails with sealed bearings
  • Stainless steel water collection pan
  • Unique clamping mechanism for cylindrical specimens minimizes specimen damage. Use of a sacrificial PVC tube produces a superior finish and minimizes edge chipping
  • Jig for round cores, 100 or 150 mm dia, with both automatic or manual feeding of the sample, length up to 200 mm, and jig for 200 mm dia. cores with manual feeding
  • Quick and easy specimen set-up
DESCRIZIONE GENERALE
DESCRIZIONE GENERALE
The cutting machines proposed in the market are normally standard saws for field use in the building industry, modified to clamp and to cut samples. They do not assure the rigidity and stability to obtain precisely specimens for laboratory use. For this reason we have designed and produced specifically designed Asphalt saws to fulfill the stringent requirements of the relevant Standards and, consequently, of the Research and Central laboratories. 

The Autosaw is an automated specimen clamping and sawing system for fast, accurate cutting of beams from asphalt prisms prepared in the PReSBOX or slab compactor and for trimming cylinders from GALILEO, GYROCOMP, SERVOPAC and other gyratory compactors. An easy-to-use spacer system sets the specimen position and allows beams or cores to be cut without the need for measurement. The saw blade advances and retracts to the home position automatically. The Autosaw includes the multislab jig. Completed with the suitable accessory, can be used to cut also asphalt cores at the desired length. It can be fitted with 650 mm dia. blade with a maximum cutting depth of 200 mm and prism length of 500 mm (extendable to 700 mm, on request). Cutting speed is operator selectable for optimum specimen finish and throughput. The asphalt saw allows an easy-to-use sawing systems for fast, accurate cutting of beams for asphalt prisms to be used in the different tests. Complete with table and clamping device for slabs, water pump for cooling the blade and filtering system.
Altro +

Caratteristiche tecniche

Blade diameter 650 mm
Max cutting depth 200 mm
Cores* 100,  150 or 200 mm dia.
Prism length* Max 500 mm
Accuracy Length, perpendicularity and flatness +/-1% max., according to Standards
Blade speed 1400-1680 rpm (50/60 Hz)
Blade traverse 0-200 mm/min (variable speed)
Blade retraction traverse 0-999 mm/min (variable speed)
Air supply for clamping 700 kPa min
Cutting advancement Automatic speed control with variable stop and retract control sensors
Cooling Water recirculation pump and stainless steel tank (included)
Power supply 5 kW
Voltage 400 V, 50 Hz, 3 ph or 220 V, 60 Hz, 3 ph
Dimensions (l x w x h) 2000 x 800 x 1700 mm
Weight approx. 650 kg
* Models suitable for cores 38 to 200 mm dia. and prisms up to 700 mm, available on request

Informazioni per l'ordinazione

77-PV47105
 AUTOSAW II, Automated Asphalt Saw, complete with asphalt Multi-slab Jig. Blade not included
400 V, 50 Hz, 3 ph.
 
77-PV47106
As above but 220 V, 60 Hz, 3 ph. 

Accessori

77-PV47000/1
Diamond blade 650 mm dia.

77-PV47000/2
Sacrifical PVC tube for 100 mm dia. core (consumable)

77-PV47011
Automatic core docking jig  for round cores, 100 or 150 mm diam., to cut automatically samples from 10 to 200 mm length.
 
77-PV47013
Manual core docking jig for round cores, 100 to 150 mm diam., to cut samples with manual feeding, from 10 to 300 mm length.
 
77-PV47015
Manual core docking jig for round cores, 200 mm diam., to cut samples with manual feeding, from 10 to 300 mm length.
 
77-PV47020
Trapezoidal specimens jig to be used in Two Point Bending Test, according to EN 12697-24 and 26.
 
77-PV47025
Jig for Semi-Circular Bending Tests according to EN 12697-44 (except for the notch), and for Disk Shaped Compact Tension Sample according to ASTM D7313. Notch and holes not included. 77-PV47011 or PV47013 is also required.
 
77-PV47030
Jig for Texas Overlay Test according to TX-248-F. 77-PV47011 or PV47013 is required.

Informazioni Aggiuntive

Application
  • Cutting of prisms and slabs to be used in Four Point Beam Bending tests according to EN 12697-24D and 26B and AASHTO T321
  • Cutting of trapezoidal specimens to be used in Two Point Beam Bending tests according to EN 12697-24A and 26A
  • Cutting AMPT cylindrical specimens round cores
  • Cutting TSRST specimens according to EN 12697-46 and AASHTO TP10
  • Cutting and dressing of Wheel Tracking slabs or cores according to EN 12697-22 and AASHTO T324
  • Cutting Prall test specimens according to EN 12697-16
  • Cutting Overlay test specimens according to TX-248-F
  • Cutting Semi-Circular Bend test specimens according to EN 12697-44 (except for the notch)
  • Cutting accurately 100, 150 and 200mm dia. cylindrical cores to different lenghts. 

Documenti