Controls Group http://www.controls-group.com/images/logo_controls.gif Water bath for penetration tests Water bath for penetration tests 81-PV0102
close
Apparecchiature generiche

Water bath for penetration tests

PRESTAZIONI PRINCIPALI
 
  • Great accuracy - PID control of bath temperature (not of chiller temperature)
  • Immersion PT100 probe included
  • Easy to set up and use
  • Fast heating and cooling
  • Minimum power and water consumption
  • Chiller is not mandatory - only for low temperatures


DESCRIZIONE GENERALE
DESCRIZIONE GENERALE
This water bath is specifically designed for penetration tests of bituminous materials.
It includes heating elements whose effect is compensated by a cooling coil that can be connected to mains water, with minimum water consumption.

The digital thermoregulator, with 0.1°C accuracy, features a PT100 immersion probe which can be placed close to the test specimen or anywhere inside the bath.
This grants a highly accurate PID control, overcoming traditional systems in which the temperature is measured in an external water chiller, therefore not representing the real bath temperature. 

Penetration tests are typically performed at 25°C, however special test conditions may occur, in which case the cooling coil can be connected to an external chiller (see accessories) for bath temperatures down to 5°C ± 0.1 °C.
The chiller is also useful in cases of very hot environments in which mains water temperature is higher than 25°C.
 
 
Altro +

Caratteristiche tecniche

  • Capacity: 2.0 l
  • Temperature range without chiller: 25 to 60 °C
  • Temperature range with chiller: 5 to 60 °C
  • Temperature accuracy: 0.1 °C
  • Temperature control: PID with measuring PT100 probe immersed in the water bath
  • Power consumption: 200 W
  • Dimensions: water bath 
  • Weight approx.: 4 Kg

Informazioni per l'ordinazione

Ordering Info

81-PV0102
Water bath for bitumen penetration tests, including heating controller and cooling coil, immersion temperature probe, internal support grid and connections to mains water or water chiller. Temperature range 25 to 60 ± 0.1 °C.
230 V, 50-60 Hz, 1 ph

81-PV0102/Z
As above but 110 V, 60 Hz, 1 ph

Opzioni integrative

Water chiller
 
81-PV0102/CH
Water chiller, 7.5 l capacity, with electronic temperature controller with ± 0.1 °C accuracy and fluid temperature range between 5 and 30°C. Suitable for chilling penetrometer water baths or temperature controlled setting time tests.
230 V, 50-60 Hz, 1 ph
Power consumption: 350 W
Overall dimensions: 415X300X420mm
Weight approx.: 15 kg
 
81-PV0102/CHZ
As above but 110 V, 60 Hz, 1 ph
 

Documenti