Fermer
Accès partenaires
Pas encore enregistré?
Mot de passe oublié?
RECHERCHE PRODUIT
Résultats pour: 'EN 12390-4'
Semi-Automatic EN  testers for cubes, cylinders and blocks WIZARD 2

Béton - EN Standards compression testers, COMPACT-Line : Semi-Automatic EN testers for cubes, cylinders and blocks WIZARD 2

Frame Four column high stiffness welded frame tested for stability to EN 12390-4. Heavy duty spherical seat in lubricating oil bath, allowing initial free alignment at the initial contact with the specimen and automatic jamming up to the end of test. Compression platens  See table. Traceable...
Continuer

Béton - Upgradings for Compression Testers: Platens surface hardness certificate

The standards prescribe a minimum surface hardness depending on the type of test to be performed. When required, the hardness verification is performed with certified instruments. This option is identified by the Certificate code shown on the following table.
Continuer
Semi-Automatic EN  testers for cubes, cylinders and blocks DIGIMAX

Béton - EN Standards compression testers, COMPACT-Line : Semi-Automatic EN testers for cubes, cylinders and blocks DIGIMAX

Introduction The new Digimax Compact-Line compression testers are ideal for commercial laboratories and production control to test cubes, cylinders and blocks.  They can be fitted with accessories to perform other tests. See accessories. The Digimax Compact-Line testers feature: Frame Four column...
Continuer

Béton - Upgradings for Compression Testers: Special calibration procedures

These procedures can be applied to Concrete, Cement and Flexural testing machines fitted with WIZARD 2, DIGIMAX 3, PILOT and AUTOMAX systems and testing systems AUTOMAX E, MCC and ADVANTEST. The calibrations are obtained by selecting suitable load sensors and using the calibration facilities of the...
Continuer
Automatic Compression Testers for Cubes and Cylinders PILOT

Béton - EN Standards compression testers, COMPACT-Line : Automatic Compression Testers for Cubes and Cylinders PILOT

Frame Four column high stiffness welded frame tested for stability to EN 12390-4. Heavy duty spherical seat in lubricating oil bath, allowing initial free alignment at the initial contact with the specimen and automatic jamming up to the end of test. Compression macfhine platens See table. Traceable...
Continuer
Super-Automatic compression testers for cubes and cylinders AUTOMAX

Béton - EN Standards compression testers, COMPACT-Line : Super-Automatic compression testers for cubes and cylinders AUTOMAX

Frame Four column high stiffness welded frame tested for stability to EN 12390-4. Heavy duty spherical seat in lubricating oil bath, allowing initial free alignment at the initial contact with the specimen and automatic jamming up to the end of test. Compression platens See table. Traceable...
Continuer
EN 12390-4, EN 772-1 Compression frames

Béton - Compression frame only : EN 12390-4, EN 772-1 Compression frames

EN  12390-4 Testing frames for cubes and cylinders 50-C46Z00, 50-C56Z00 and 50-C78Z00 frames, 2000 to 5000 kN cap., feature a four column rigid welded steel construction, with heavy duty spherical seat in oil bath, tested for stability conforming to EN 12390-4. Complete with pedestal, front door and...
Continuer
Automatic compression testers for cubes and cylinders and blocks PILOT

Béton - EN Standards compression testers, COMPACT-Line : Automatic compression testers for cubes and cylinders and blocks PILOT

Frame Four column high stiffness welded frame tested for stability to EN 12390-4. Heavy duty spherical seat in lubricating oil bath, allowing initial free alignment at the initial contact with the specimen and automatic jamming up to the end of test. Compression platens See table. Traceable...
Continuer
Super-Automatic compression testers for cubes, cylinders and blocks AUTOMAX

Béton - EN Standards compression testers, COMPACT-Line : Super-Automatic compression testers for cubes, cylinders and blocks AUTOMAX

Frame Four column high stiffness welded frame tested for stability to EN 12390-4. Heavy duty spherical seat in lubricating oil bath, allowing initial free alignment at the initial contact with the specimen and automatic jamming up to the end of test. Compression platens See table. Traceable...
Continuer
Strain gauged column and tester for load transfer verification

Béton - Calibration of compression and flexural testers: Strain gauged column and tester for load transfer verification

Introduction The verification of force transfer includes: Accuracy of force indication Self alignement of the upper machine plate Alignement of the upper machine plate Restraint of movement of the upper plate These verifications can be performed using the 82-E0105/1 strain gauged...
Continuer