Fermer
Accès partenaires
Pas encore enregistré?
Mot de passe oublié?
RECHERCHE PRODUIT
Résultats pour: 'ASTM D5084'
Permeability system using triaxial cell

Mécanique des sols - Permeability test : Permeability system using triaxial cell

This system has been developed for the laboratory measurement of the hydraulic conductivity (coefficient of permeability) of water saturated porous materials. The test is performed using a triaxial cell fit with 5 no-volume change valves: 2 for upper drainage, 2 for lower drainage and 1 for water pressure....
Continuer
Standard triaxial system with analogue measurement

Mécanique des sols - Static triaxial systems : Standard triaxial system with analogue measurement

Standard triaxial System with analogue measurement is the ideal basic solution for performing standard triaxial tests such as effective and total stress laboratories that don’t require digital measurement.  All the data acquisition and test management are made in manual mode
Power supply is only required for air compressor and for triaxial load frame during failure stage. 

A typical Standard triaxial system with analogue measurements includes:

Load frame:  
- TRIAX specifically designed for triaxial applications is ideal for commercial laboratories that need a versatile machine capable of performing a wide range of tests. (Max sample sizes: 70 mm)
- TRITECH 50 kN or 100 kN: TRITECH original high-performance load frames for triaxial tests, ideal solution for advanced and research laboratories that perform high quality tests at high productivity levels.

Triaxial cell with accessories: standard triaxial cell with dedicated accessories for performing and preparing samples from 35 mm to 100 mm diameter.

Analogue measuring system: in a standard triaxial system

Pressure system: Air/water interface with air compressor and air filter, generally used for effective stress (two pressure lines are required for cell and back pressure)
Oil/water interface is also available, suggested when only total stress test (UU) is required.

Template for data processing and reporting: generally used in system with automatic data acquisition, but thanks to the high flexibility they can be used with manual input of data also in standard triaxial systems with analogue measurement.  
Continuer
Standard triaxial system with built-in digital data acquisition

Mécanique des sols - Static triaxial systems : Standard triaxial system with built-in digital data acquisition

Standard triaxial System with built-in data acquisition is the ideal compact solution for performing standard triaxial tests such as effective and total stress. .
 
A typical standard triaxial system with built-in acquisition measurement includes:

Load frame with four built-in channels:
- TRIAX specifically designed for triaxial applications and is ideal for commercial laboratories that need a versatile machine capable of performing a wide range of tests. (Max sample sizes: 70 mm)
- TRITECH 50 kN or 100 kN: TRITECH original high-performance load frames for triaxial tests, ideal solution for advanced and research laboratories to perform high quality tests at .

Triaxial cell with accessories: 
- Standard triaxial cell with dedicated accessories for performing and preparing sample form 35 mm to 100 mm diameter.
- Banded triaxial cell with dedicated accessories for performing and preparing sample from 38 to 150 mm diameter.

Digital measuring system: Data acquisition is included in the load frame; four channels are available for load, displacement, pore pressure and volume change. If Hydromatic standalone pressure unit is selected, a separate volume change device is not required. 

Pressure system:
- Hydromatic standalone pressure/volume controller, water pressure source and volume change controller for cell and back pressure.
- Air/water interface with air compressor and air filter

Template for data processing and reporting:  geotechnical Geo-Analysis-Templates suitable for real time data processing and printout of test certificates according to the most important international Standards.
 
Standard triaxial configuration with built-in data acquisition can be used for performing additional tests such as CBR, Unconfined and CRS.
 
More than 300 system configurations are available depending on type of test, sample size, pressure system. Please contact us for a complete offer. 
Continuer
Standard triaxial system with external/expandable digital data acquisition

Mécanique des sols - Static triaxial systems : Standard triaxial system with external/expandable digital data acquisition

Standard triaxial system with external data acquisition is the expandable compact solution for performing effective and total stress. Data acquisition can be shared with other soil testing equipment. (e.g. Consolidation, shear, permeability).
 
A typical standard triaxial system with external data acquisition system includes:

Load frame
- TRIAX specifically designed for triaxial applications and is ideal for commercial laboratories that need a versatile machine capable of performing a wide range of tests. (Max sample sizes: 70 mm)
- TRITECH 50 kN or 100 kN: TRITECH original high-performance load frames for triaxial tests, ideal solution for advanced and research laboratories that want to perform high quality tests at .

Triaxial cell with accessories: 
- Standard triaxial cell with dedicated accessories for performing and preparing sample from 35 mm to 100 mm diameter.
- Banded triaxial cell with dedicated accessories for performing and preparing sample from 38 to 150 mm diameter

Automatic data acquisition system with digital measurements: 
- GEODATALOG 8; it works directly connected to a PC. Data are automatically transferred to the PC in real time for live plotting and monitoring of the tests in progress.

Pressure system:
- Hydromatic standalone pressure/volume controller, water pressure source and volume change controller for cell and back pressure.
- Air/water interface with air compressor and air filter

Template for data processing and reporting:  geotechnical Geo-Analysis-Templates suitable for real time data processing and printout of test certificates according to the most important international Standards.
 
Standard triaxial configuration with external data acquisition can be used for performing additional test such as CBR, Unconfined and CRS, Permeability.
 
More than 300 system configurations are available depending on type of test, sample size, pressure system. Please contact us for a complete offer. 
Continuer