Controls Group http://www.controls-group.com/images/logo_controls.gif Cold bend testing machine Cold bend testing machine
close
Share

Cold bend testing machine

Request more info
close
print page
EN ISO 15630-1 | EN ISO 7438 | EN 10080 | ASTM A615
Images
70-C0977 70-C0977 Detail of bendingDetail of bending Detail of straightening Detail of straightening
General description
General description
Used for bending and straightening steel reinforcing bars. Two types of test can be performed:
  1. Bending the specimen through 90° and then straightening it again up to a minimum of 20°.
  2. Bending through 180°.
The machine consists essentially of a hydraulic jack with cylindrical mandrel-stem, mounted horizontally within a strong steel frame which also carry two fixed reaction rollers. Two 50 and 100 mm dia. rollers are supplied with the machine. Mandrels and mandrel holders have to be ordered separately. Mandrels larger than 96 mm dia. do not need mandrel holders because they fit directly onto the stem.
ASTM specifications require 100 mm dia. rollers only and the bent up to 90°.
More +

Technical specifications

  • Max loading capacity: 120 kN
  • Piston travel max. speed: 90 mm/min
  • Power: 750 W
  • Dimensions: 1500x665x1050 mm
  • Weight approx.: 210 kg

Ordering info

70-C0977 
Cold bend testing machine, 120 kN cap. 230 V, 50 Hz, 1 ph

Accessories

Mandrel holders

70-C0977/61 
Mandrel holder for mandrels from 24 to 50 mm dia.

70-C0977/62 
Mandrel holder for mandrels from 54 to 96 mm dia.

Mandrels
See the PDF.

Documents

Partner's Documents