close
PRODUCT SEARCH
Results for: ''
Digital deflection measuring system for suspended structures

Concrete - NDT Structural inspection and monitoring: Digital deflection measuring system for suspended structures

The determination of deflection of ceilings, bridges or any suspended structure, can be easily performed using this modern digital system. This independent data acquisition unit, equipped with in-built rechargable battery, touch screen graphic display and removable USB pen drive, is ideal for testing...
continue
Concrete mixers new

Concrete - Concrete mixers: Concrete mixers new

Pan type models have been selected  for laboratory use, to prepare concrete specimens and samples. They assure the best uniformity and efficient mixing. 55-C0199/9A model is supplied complete with additional interchangeable mixing paddle, particularly suitable for low slump concrete, wheels and...
continue
Compression and flexure machines retrofit

Concrete - SMART-Line control consoles : Compression and flexure machines retrofit

In many cases it may happen that the customer has already an old compression or flexural machine, with old pressure gauge and not more reliable readout unit. In these cases, rather than buying a new machine, it is enough to update the hydraulic system and the readout unit. The control unit and...
continue
Calibration equipment for geotechnical laboratory

Soil mechanics - Calibration equipment for geotechnical laboratory : Calibration equipment for geotechnical laboratory

Any laboratory needs to verify periodically the calibrations of their electronic measuring systems, in order to produce reliable and accurate results. Equipment for calibrating force, displacement, volume change and pressure measuring devices. Force measurement  For calibration of force...
continue
Surface soil sampler, ASTM

Soil - Surface soil samplers: Surface soil sampler, ASTM

Used to take a standard volume sample from the ground in order to establish the in-situ density of the soil. The apparatus consists of a 5 kg sliding weight drop hammer, which falls freely onto the driving head situated on top of the sampling tube ID 73x66 mm high. Made from steel protected against...
continue
Standalone pressure volume controller, Hydromatic

Soil mechanics - Pressure systems for triaxial testing: Standalone pressure volume controller, Hydromatic

Hydromatic standalone is a general-purpose water pressure source and volume change controller. It is driven by a stepper motor, which enables the unit to measure the volume change. The unit consists of a hydraulic piston, driven by a low friction screw and gearbox, mounted on a ball-slide, and is managed...
continue
Complete de-airing water system

Soil mechanics - Water de-airing systems: Complete de-airing water system

De-airing the water, that will be used to fill triaxial cells, pressure systems and volume change measurement apparatus, is essential for properly saturating soil specimens. The system comprises the following: - A de-airing tank (two versions are available with 7 or 23 L capacity) - Vacuum pump...
continue
Axis translation method: configuration of test system

Soil mechanics - Unsaturated soil triaxial test equipment: Axis translation method: configuration of test system

Axis translation method with High Air Entry Stone (HAES). Operating principle. One of the problems when a sample with high suction is to be tested, is to prevent the sample from sucking the water from the porous stone on the base pedestal and cause cavitation in the triaxial cell pore water measuring...
continue
Laboratory coring machine and bits

Rock mechanics - Sample preparation equipment: Laboratory coring machine and bits

This machine is specifically used in the laboratory for cutting core samples from hard materials such as rock and concrete. A clamp is provided to firmly secure the material during the cutting cycle. The coring area is protected by a transparent cylinder. A special clamping device to prepare rock samples from...
continue
Universal asphalt and concrete saw, MULTISAW

Asphalt/bituminous mixture - Cutting and coring machines: Universal asphalt and concrete saw, MULTISAW

Standard cutting machines in the market are standard saws for field use in the building industry. They do not assure the rigidity and stability to obtain precisely specimens for laboratory use. For this reason, we have designed and produced the specific requirements of the relevant Standards and consequently...
continue
Stress path triaxial and uniaxial automatic test system

Rock mechanics - Uniaxial and triaxial test systems: Stress path triaxial and uniaxial automatic test system

Rock mechanics is an important field of geotechnical engineering as it is the theoretical and applied science concerning the physical behavior of rocks and rock masses. Slopes, tunneling, dams foundations and surface constructions requires the characterization of involved rocks and the analysis of their...
continue
Infrared non-contact thermometer

General lab - Thermometers: Infrared non-contact thermometer

This stick type infrared thermometer measures surface temperatures without touching the object being measured. The closer the instrument is to the object being measured, the smaller the spot size become. This can be as small as 5 mm at a distance of 65 mm.
continue
Portable thermo-hygrometer

General lab - Portable thermo-hygrometer: Portable thermo-hygrometer

It provides readings with 98% precision in a very short time for both R.H. and temperature. Range: R.H. 5.0 to 95%; °C 0.0 to 50.0 Resolution: R.H. 0.1%; 0.1°C Accuracy: R.H. ±3%; ±0.8°C Dimensions: 177x68x45 mm Weight approx.: 490 g  ...
continue
Multirange conductivity meter

General lab - Multirange conductivity meter: Multirange conductivity meter

Ideal for quick measurement of conductivity in soils from 0 to 199.9 µS/cm. Measuring ranges µS/cm: 0.0 to 199.9, resolution 0.1 µS/cm: 0.0 to 1999, resolution 1 µS/cm: 0.0 to 19.99, resolution 0.01 Accuracy: ±1% full scale Temperature compensation:...
continue
Rain gauge

General lab - Meteorological equipment: Rain gauge

Made from stainless steel. Dimensions: dia. 115x300 mm Weight approx.: 1 kg
continue
Vacuum pumps

General lab - Vacuum pumps and de-airing systems: Vacuum pumps

Vacuum pumps are used for a number of applications concerning, above all, De-Airing systems  of water. Water vapour sucked by the vacuum pump and mixed with the oil, producing emulsion, may cause serious damage to the pump when in notable concentration. For this reason it is important, for such...
continue
Measuring cylinders

General lab - Laboratory glassware: Measuring cylinders

continue
Plastic boxes and Buckets

General lab - Plasticware: Plastic boxes and Buckets

continue
Mixing bowls

General lab - Laboratory hardware: Mixing bowls

continue
Water stills

General lab - Water stills: Water stills

Used to prepare distilled water for laboratory use . An automatic device keeps the water to a constant level. In case of shortage of water an automatic switch cuts off the current, switches on again when the level becomes normal. Capacity (liters per hour): 7.5 Power: 6 kW Overall...
continue
Mobile laboratories

General lab - Mobile laboratories: Mobile laboratories

Introduction In many cases, the mobile laboratory is the first equipment to arrive on the job-site and a smart, efficient, well equipped unit is the best introduction for a contractor. Controls manufactures a complete line of mobile laboratories designed to meet all possible requirements for rugged use in...
continue
Electric Generator

General lab - Electric Generator: Electric Generator

For site use with electrically operated core drilling machines and other apparatus when mains current is not available. It has a petrol driven engine. It features a digital control panel with automatically adjusts the output voltage, two 16A-250V shuko sockets and one 12V charger. Its sturdy...
continue
PC Cabinet

General lab - PC Cabinet: PC Cabinet

Ideal for housing PC and printer. It is a purpose built accessory for use in many laboratory applications, where a PC is required in a testing  environment. The PC cabinet is designed to provide PC system protection from airborne contamination such as cement and dust. Filtration is achieved by two...
continue
Bohme abrasion tester

Rock mechanics - Abrasion testing machines: Bohme abrasion tester

Mineral aggregates are used in all fields of the construction industry to produce bituminous misture, concrete, mortars to be used in structures, fill materials, railway ballast etc. For this reason we have given particular attention to all testing methods. The EN Standards have grouped all tests on...
continue
Specific gravity frame and baskets

Aggregates - Specific gravity frame and baskets: Specific gravity frame and baskets

The word concrete comes from the Latin word "concretus" that means compact or condensed; in fact it is well known that since the second century the Romans mixed quicklime with pozzolan to enhance its hydraulic properties and then mixed it with aggregates in order to obtain a robust stone-like...
continue
Semi-Automatic compression testers for cubes and cylinders WIZARD 2

Concrete - General utility compression testers, COMPACT-Line: Semi-Automatic compression testers for cubes and cylinders WIZARD 2

Frame Rigid welded steel construction. Spherical seat allows free alignment at the initial contact with the specimen. Compression platens See table. Traceable certificate of surface hardness available on request. Wizard, Semi-Automatic power and control system Dual stage pump: low pressure/high...
continue
Universal core drilling machine

Concrete - Drilling machines: Universal core drilling machine

This robust versatile machine is ideal for field where it is necessary to core at any angle. The extension columns (see accessories) permit the holding at a maximum vertical or horizontal distance of 3850 mm. The rack feed (drilling excursion) is 1000 mm long. The core bits, strap wrench and extension...
continue
Digital caliper

General lab - Caliper: Digital caliper

Digital calipers made in stainless steel. reading 0,01 mm, accuracy ± 0.02 mm repeatability 0.01 mm 3 buttons: On / off (manual), Reset and conversion mm / inch
continue
Safety - Soundproof machines cabinets

General lab - Safety - Soundproof machine cabinets: Safety - Soundproof machines cabinets

CONTROLS machines, such as sieve shakers, compactors and Los Angeles abrasion machines, can be upgraded with various types of cabinets that allow working noise reduction in the laboratory and safety protection, both features are essential for working within CE limits. The cabinets are made from steel...
continue
Microlance instant moisture and temperature tester

Aggregates - Microlance instant moisture and temperature tester: Microlance instant moisture and temperature tester

This instrument measures the moisture and temperature of building materials (such as sand, aggregates and mixes) at depths up to 1 m approx., simply by insertion. The digital readings are shown instantly. The Microlance has a built-in computer, which gives it the flexibility to handle a wide range of...
continue
Bulk density of cement

Cement - Bulk density of cement: Bulk density of cement

Used to determine the bulk density of cement as specified by the “Commission des méthodes d’essai des matériaux de construction”. It consists of a sieve funnel, an unit weight measure 1 litre capacity, a tripod, and straightedge. Overall dimensions:...
continue
Digital readout unit DIGIMAX

Concrete - Digital readout unit: Digital readout unit DIGIMAX

Introduction Very often may be convenient to update an old compression tester, replacing for example the old pressure gauge, with a modern and much more accurate load measuring system as our Digimax readout unit. This application requires a suitable pressure transducer and connecting cable. See...
continue
Cyclic simple shear

Soil mechanics - Cyclic simple shear : Cyclic simple shear

The cyclic simple shear apparatus is generally used for research in the dynamic field of soil behaviour, and can quite easily simulate many different field loading conditions, for example: - Stability under seismic events on submerged slopes of the continental shelf characterised by layered...
continue
Soil lathe, trimmer, extruder

Soil - Sample preparation : Soil lathe, trimmer, extruder

This apparatus is used to prepare any size of cylindrical soil sample: - Specimen lathe function: from dia. 35x70 mm to dia. 110x220 mm - Specimen trimming and extruding function: from dia. 35x70 mm to dia. 50x100 mm- The apparatus which can be used...
continue
Pocket penetrometers

Soil - Field inspection testers: Pocket penetrometers

Designed for making field classification of cohesive soils in terms of consistency, shear strength and approximate unconfined compressive strength. Two models available: 16-T0163 Heavy duty model,   16-T0171 standard model,
continue
Van Asbeck Apparatus for flexibility test on hydraulic bituminous mixes

Asphalt/bituminous mixture - Van Asbeck apparatus: Van Asbeck Apparatus for flexibility test on hydraulic bituminous mixes

The scope of Van Asbeck apparatus is to test and assess the flexibility property and related impermeability to water under pressure of hydraulic bituminous mixes to be used to cover the water storage of dams. The apparatus consists essentially of a steel cylindrical cell divided in two sections: the upper...
continue
Axial strain dial indicators

Soil mechanics - Manual measuring system for triaxial : Axial strain dial indicators

50 mm dial diameter, clockwise rotation. Supplied complete with rear mounts for connection to load rings. Weight approx.: 200 g
continue
External load cells

Soil mechanics - Electronic measuring system for triaxial : External load cells

Used to measure the axial force applied to the specimen in the triaxial cells. Complete with connector to the upper beam of our Triaxial load frames. Nominal sensitivity: 2mV/V Accuracy: better than 0.2% Dimensions (cell only): dia. 57x80 mm (3.5 and 10 kN models) dia. 82x110 mm (50...
continue
Introduction to Asphalt Mixture Performance Testers

Asphalt/bituminous mixture - AMPT - Asphalt Mixture Performance Tester: Introduction to Asphalt Mixture Performance Testers

Over the last 25 years we have worked closely with Govenment Highway Authorities, Universities, Asphalt producers, Road Constructors and Research Organization to pioneer the world's best and most innovative range of advanced asphalt testing systems. AMPT Pro and DynaQube have been developed to perform...
continue
Introduction to Universal Testing Machines UTM

Asphalt/bituminous mixture - Universal Testing Machines UTM: Introduction to Universal Testing Machines UTM

Over the last 25 years we have worked closely with Govenment Highway Authorities, Universities, Asphalt producers, Road Constructors and Research Organization to pioneer the world's best and most innovative range of advanced asphalt testing systems. Our range of Servo-hydraulic and Servo-pneumatic...
continue
Introduction to dynamic testing accessories

Asphalt/bituminous mixture - Dynamic testing accessories: Introduction to dynamic testing accessories

continue
Nut and Bolt test accessory

Universal testers - Steel (re-bars) - Test accessories for UTM - HPT Series: Nut and Bolt test accessory

The test accessory includes:                                         - bare test attachment    ...
continue
Asphalt testing accessories

Universal testers - Steel (re-bars) - Test accessories for UNIFRAME : Asphalt testing accessories

Accessory sets for testing asphalt samples with UNIFRAME machines. Suitable for all UNIFRAME models if not otherwise specified. Single accessories needed for the same test are put together to make it easy for the user to choose the right setup. All items, however, can be ordered individually.
continue
Digimax SMART line, semi automatic digital tester

Concrete - SMART-Line control consoles : Digimax SMART line, semi automatic digital tester

Introduction The Digimax control system for connection to compression and flexural testing frames, including the hydraulic power unit, the flow control valve and the digital measuring system, has been designed to fit all our models of compression and flexural frames ranging from 100 to 5000 kN and integrated...
continue
Falling head permeability apparatus

Soil - Permeability apparatus: Falling head permeability apparatus

The soil permeability is a very important factor to study the behavior of soil in its natural condition with respect to water flow. The falling head method is particularly suitable for fine-grained soils such as clay-like or silty soils in the range of 1x10-2 to 1x10-6 cm/s. For relatively coarse grained...
continue
Mini On-sample transducers for local strain measurement in triaxial testing

Soil mechanics - Advanced measuring devices for triaxial : Mini On-sample transducers for local strain measurement in triaxial testing

In conventional triaxial testing the stiffness of a soil specimen is determined  by external measurement of displacement.  Such measurement are subjected to errors caused by deflections of loading system and bedding of the porous stone onto the ends of the specimen.  Local axial and...
continue
Air/Water pressure system and controls panels

Soil mechanics - Pressure systems for triaxial testing: Air/Water pressure system and controls panels

Bladder air/water pressure cylinders The Bladder air/water cylinders are used to deliver pressurized water up to 1000 kPa to triaxial cells by the pressure distribution panels. The main advantages from using this apparatus are: High degree of accuracy Extremely simple to operate Future...
continue
Rock, concrete and masonry  saw

Rock mechanics - Sample preparation equipment: Rock, concrete and masonry saw

This universal saw, completed with the suitable accessory, can be used to cut concrete / rock cores and irregular rock samples in order to obtain geometrically defined samples. It can be fitted with 350 to 450 mm dia. blades. The head is adjustable in height. The tilting motor head permits cuts up to...
continue
Advanced Automated Asphalt Saw, AUTOSAW II

Asphalt/bituminous mixture - Cutting and coring machines: Advanced Automated Asphalt Saw, AUTOSAW II

The cutting machines proposed in the market are normally standard saws for field use in the building industry, modified to clamp and to cut samples. They do not assure the rigidity and stability to obtain precisely specimens for laboratory use. For this reason we have designed and produced specifically...
continue
Auger power head

Soil - Soil sampling equipment: Auger power head

Used in conjunction with sampling tube to obtain disturbed or indisturbed samples of soils. Two models available.
continue
Max/Min thermometer

General lab - Thermometers: Max/Min thermometer

continue
Hand anemometer

General lab - Meteorological equipment: Hand anemometer

Large and easy-to-read display. Its polyethylene protection foam makes it comfortable to hold. Display: Instant windspeed, Maximum windspeed, Average windspeed (3 s to 24 h). LCD with backlight. 54 mm propeller. Units: km/h, m/s, fps, knots and bft Resolution: at the 10th up to 99.9, then to...
continue
Vacuum regulator

General lab - Vacuum pumps and de-airing systems: Vacuum regulator

The vacuum fine regulation and monitoring are required by particular tests as for example the Binder recovery by rotary evaporation conforming to EN 12697-3 (see \#rotary-evaporator--for-binder-recovery\#). This unit satisfy this requirement. For more details concerning the most common applications, see the...
continue
Volumetric flasks

General lab - Laboratory glassware: Volumetric flasks

continue
Support bases, Sleeves , Clamps

General lab - Porcelain and various: Support bases, Sleeves , Clamps

continue
Sample bags

General lab - Plasticware: Sample bags

continue
Trays and pans

General lab - Laboratory hardware: Trays and pans

continue
Abrasion testing machine

Rock mechanics - Abrasion testing machines: Abrasion testing machine

Mineral aggregates are used in all fields of the construction industry to produce bituminous misture, concrete, mortars to be used in structures, fill materials, railway ballast etc. For this reason we have given particular attention to all testing methods. The EN Standards have grouped all tests on...
continue
Automatic compression testers for cubes and cylinders PILOT

Concrete - General utility compression testers, COMPACT-Line: Automatic compression testers for cubes and cylinders PILOT

Frame Rigid welded steel construction. Spherical seat allows free alignment at the initial contact with the specimen. Compression platens See table. Traceable certificate of surface hardness available on request. Pilot, Automatic power and control system Dual stage pump, centrifugal for fast...
continue
MCC, multifunctional control console

Concrete - Control consoles for advanced testing: MCC, multifunctional control console

Automatic hydraulic systems for static and low frequency dynamic tests on building materials under control of Load/Stress, Displacement, Strain. Ideal both for traditional tests, such as compression and flexure on concrete, cement, mortar, blocks etc. and cyclic tests for the determination of secant elastic...
continue
Portable core drilling machine

Concrete - Drilling machines: Portable core drilling machine

The machine is composed by three main parts: Electric motor speed reducer Light alloy base with adjustable feet, and wheels Support column These three parts can be easily assembled and disassembled for transportation. The support steel column can be angled with respect to the base. The...
continue
Digital readout unit WIZARD 2

Concrete - Digital readout unit: Digital readout unit WIZARD 2

Very often may be convenient to update an old compression tester, replacing for example the old pressure gauge, with a modern and much more accurate load measuring system as our WIZARD 2 readout unit. This application requires a suitable pressure transducer and connecting cable. See Pressure...
continue
Soil sampler, cutter and extruder

Soil - Sample preparation : Soil sampler, cutter and extruder

This versatile sampler can be used to extrude and prepare soil samples for the following soil mechanics tests: - consolidation - shear - triaxial - permeability - other tests Various circular, cylindrical and square cutters are available from our range, depending on the geotechnical test to be...
continue
Dial penetrometers

Soil - Field inspection testers: Dial penetrometers

Three versions  available: 16-T0160 and 16-T0162 respectivety for soft soil and medium/hard soil; 16-T0161 complete with 5 different plungers used to evaluate the angle of internal friction “j” of sandy soil and the cohesion “c” in clay soils.  They all include a peak hold...
continue
Load measuring rings for triaxial test

Soil mechanics - Manual measuring system for triaxial : Load measuring rings for triaxial test

Load rings can be used for load measurement and for calibration of testing machines. All model are made from special alloy steel and they are supplied complete with analogue dial gauge 0.01 mm, analogue dial gauge 0.001 mm and digital dial gauge 0.001 mm and calibration chart.  All models can be...
continue
Axial strain displacement transducers

Soil mechanics - Electronic measuring system for triaxial : Axial strain displacement transducers

Potentiometric transducers Linear potentiometric transducers are used with various testing machines and apparatus as, for example, Consolidation apparatus, Shear testing equipment and Triaxial testing equipment to fit triaxial cells. They feature: Input voltage: 10 V DC Output: from 0 to 10 V...
continue
Permeability cells

Soil mechanics - Permeability test : Permeability cells

The permeability cells are available with brass valves and related accessories for normal use and with stainless steel valves for use with contaminated soils. The toxic interface chamber 28-WF0194/3 is recommended to be fit between control panel and permeability cells to avoid toxic permeants from entering...
continue
Next generation Asphalt Mixture Performance tester AMPT Pro

Asphalt/bituminous mixture - AMPT - Asphalt Mixture Performance Tester: Next generation Asphalt Mixture Performance tester AMPT Pro

IPC Global, the researcher's choice for advanced and the new AMPT Pro. Designed with the latest technologies and product developments to ensure that it surpasses any other product on the market, fully complies with AASTHO TP9 and can perform the three asphalt tests of NCHRP Projects 9 -19 and 9-29 -...
continue
Servo-pneumatic Universal Testing Machine UTM, 16 kN cap.

Asphalt/bituminous mixture - Universal Testing Machines UTM: Servo-pneumatic Universal Testing Machine UTM, 16 kN cap.

IPC Global's UTM-16P Servo-pneumatic testing systems are precision engineered to accomplish your thoughest research challenges. Designed and built to IPC Global's highest standard for Civil Engineering laboratories, these systems deliver superior reliability and accuracy with proficient performance...
continue
IMACS2, Third Generation Integrated Multi-Axis Control System (IMACS)

Asphalt/bituminous mixture - Dynamic testing accessories: IMACS2, Third Generation Integrated Multi-Axis Control System (IMACS)

Dependable and user-friendly Data safety confidence - An innovative double control facility (local via color touch screen display) and remote (via PC) will be available to allow users to set-up tests directly on the controller as well as from a PC ensuring valuable test continuity in event of PC...
continue
500/1000kN testing frame for steel and concrete testing

Universal testers - Steel (re-bars) - 500/1000 kN tension/compression UTM for steel and concrete: 500/1000kN testing frame for steel and concrete testing

This frame is meant to be connected to an existing AUTOMAX Multitest control console in order to have a unique system suitable to perform both concrete and steel testing. It is suitable to perform tension tests on steel rebars up to 26 mm dia. and compression tests on cylindrical concrete specimens up to...
continue
Bend and re-bend test accessory

Universal testers - Steel (re-bars) - Test accessories for UTM - HPT Series: Bend and re-bend test accessory

Bend and rebend test attachment for specimens up to 40mm dia. Loading element not included Loading elements ranging from dia.16mm up to dia.320mm available on request. See Accessories.
continue
Soil and soil-cement testing accessories

Universal testers - Steel (re-bars) - Test accessories for UNIFRAME : Soil and soil-cement testing accessories

Accessory sets for testing soil and soil-cement samples with UNIFRAME machines. Suitable for all UNIFRAME models if not otherwise specified. Single accessories needed for the same test are put together to make it easy for the user to choose the right setup. All items, however, can be ordered...
continue
Pilot SMART line, entry level automatic tester

Concrete - SMART-Line control consoles : Pilot SMART line, entry level automatic tester

This introduction has been designed to fit all our models of compression and flexural frames ranging from 100 to 5000 kN. Has been further upgraded using the latest technologies thus maintaining a very competitive price. The Automatic Compression Testers with the PILOT System have been the most reliable,...
continue
Water bath for penetration tests

General lab - Water baths: Water bath for penetration tests

This water bath is specifically designed for penetration tests of bituminous materials.
It includes heating elements whose effect is compensated by a cooling coil that can be connected to mains water, with minimum water consumption.

The digital thermoregulator, with 0.1°C accuracy, features a PT100 immersion probe which can be placed close to the test specimen or anywhere inside the bath.
This grants a highly accurate PID control, overcoming traditional systems in which the temperature is measured in an external water chiller, therefore not representing the real bath temperature. 

Penetration tests are typically performed at 25°C, however special test conditions may occur, in which case the cooling coil can be connected to an external chiller (see accessories) for bath temperatures down to 5°C ± 0.1 °C.
The chiller is also useful in cases of very hot environments in which mains water temperature is higher than 25°C.
 
 
continue
Water test kits

Soil - Chemical tests apparatus: Water test kits

Acidity Test Kit The Acidity Test Kit is equipped with all you need to determine acidity of water. The kit is quick, easy to use and portable. This makes it practical for field as well as laboratory use. The design makes the kit easy to handle and, except for HI 3820-0, practically prevents accidental injury...
continue
Piston volumeter

Soil - Surface soil samplers: Piston volumeter

An easy to use pocket device very useful  to determine the in-situ density of undisturbed soil. A stainless steel tube is driven into the soil and the volume is read on the stem marked from 0 to 30 cm3. Weight approx.: 0.5 kg
continue
300 mm dia. Platen test set, Swiss method

Soil - Platen bearing test apparatus: 300 mm dia. Platen test set, Swiss method

Used to estimate the bearing capacity of a soil under field loading conditions on flexible pavement components . The relatively lightweight (68 kg in total) and small dimensions of the apparatus make it very easy to use and to move from one place to another. The measuring bridge made from aluminium alloy, is...
continue
Compaction permeameters

Soil - Permeability apparatus: Compaction permeameters

This apparatus is used to control the water supply in the constant or falling head permeability tests on compacted soils. The permeameters comprise valve, water inlet or outlet, mould and collar, filter baseplate. The stand consists of an aluminium panel complete with Perspex tubes and graduated rules for...
continue
Double wall triaxial cells for unsaturated tests

Soil mechanics - Triaxial Cells : Double wall triaxial cells for unsaturated tests

Introduction In the traditional triaxial systems, where saturated samples are tested, the volume change measurement is a simple monitoring of the water entering or leaving the sample by a volume change transducer. On the contrary, in the unsaturated systems volume change measurements are complicated by the...
continue
Bender elements

Soil mechanics - Advanced measuring devices for triaxial : Bender elements

Bender elements allow to measure the maximum shear modulus (Gmax) of a soil sample and from this data to evaluate the stiffness of a soil. Gmax is generally associated with shear strain levels of about 0.001% and is a key parameter in small strain dynamic analysis, such as those to predict soil...
continue
Oil and water constant pressure system

Soil mechanics - Pressure systems for triaxial testing: Oil and water constant pressure system

This apparatus provides an infinitely variable constant pressure using an adjustable spring type dead weight pressure feedback system connected in-line with a pump and an oil/water interchange vessel. The apparatus comprises: hydraulic pump, honed piston/spring assembly, cylindrical oil/water interchange...
continue
Core trimmer and cut-off machine

Rock mechanics - Sample preparation equipment: Core trimmer and cut-off machine

Used to obtain rock samples perfectly machined (cube, prisms, etc) from irregular rock or core pieces. It is supplied complete with a proper vice to hold irregular pieces firmly in place up to 70x140 mm approximately and “V” device for cores up to 75 mm dia. Longer cores can be machined by turning...
continue
Coring machine Multi core-drill

Asphalt/bituminous mixture - Cutting and coring machines: Coring machine Multi core-drill

Specimen preparation and ultimately specimen quality are critical factors in material characterization. IPC Global's Multi Core-Drill is a superior laboratory asphalt core drill whose robust and rigid design provides a precise coring of asphalt prisms, cylindrical and slab samples to the highest...
continue

Soil - Soil sampling equipment: Sampling equipment

Used to take undisturbed soil sample in soft and fine soils. The apparatus comprises TY-handle, Extension rod, Jarring link, Stainless steel sample tube 38x230 mm length. The sample is obtained by percussion, lifting all the upper assembly which slides inside the jarring link and forces the sample tube into...
continue
IP and ASTM thermometers mercury free

General lab - Thermometers: IP and ASTM thermometers mercury free

continue
Weather station

General lab - Meteorological equipment: Weather station

Measurements and main features: Outdoor temperature and humidity wireless up to 3 transmitters (max. 100 m) Indoor temperature temperature and humidity Comfort level Max-min function Weather forecast Tendency of atmospheric pressure Relative atmospheric...
continue
Air drying unit

General lab - Vacuum pumps and de-airing systems: Air drying unit

Can be installed between the vacuum pump (see Vacuum pumps) and the apparatus to be de-aired (e.g. Pyknometers). It has to be filled with a suitable Dessicant (e.g. Silica gel  dessicant 86-D0819). This unit is used to avoid /limit the water vapour to mix with the oil of the vacuum pump, which may cause,...
continue
Bunsen burner, Tripods, Wire gauzes, Tongs

General lab - Porcelain and various: Bunsen burner, Tripods, Wire gauzes, Tongs

continue
Bottles and Funnels

General lab - Plasticware: Bottles and Funnels

continue
Moisture content tins and cans

General lab - Laboratory hardware: Moisture content tins and cans

continue
Moisture determination balance

Soil - Moisture content determination equipment: Moisture determination balance

Automatically and simultaneously dries and weighs solid samples for the determination of moisture content. Provides a continuous direct readout for both weight and percentage moisture loss through the entire cycle. Built in timer.
continue
Pressure and volume controller for triaxial tests - AUTOTRIAX 2

Soil mechanics - AUTOTRIAX 2 - Automatic triaxial testing equipment: Pressure and volume controller for triaxial tests - AUTOTRIAX 2

The Hydromatic is used to generate water pressure in and around the test specimen. It is driven by a high precision stepper motor, which enables the volume change measurement. The unit consists of a hydraulic piston, driven by a ball-screw and gearbox, mounted on a ball-slide, and works accurately under...
continue
Gasometer Dietrich-Früling

Aggregates - Equipment for chemical tests: Gasometer Dietrich-Früling

Used for the determination of CaCO3 especially in limestone and lime marl. It consists of a glass container in which the reaction between the calcium carbonate contained in the products and a solution of hydrochloric acid takes place. The gas given off is collected with the container. Being measured the...
continue
Semi-Automatic compression testers for cubes, cylinders and blocks WIZARD 2

Concrete - General utility compression testers, COMPACT-Line: Semi-Automatic compression testers for cubes, cylinders and blocks WIZARD 2

 Frame Rigid welded steel construction. Spherical seat allows free alignment at the initial contact with the specimen. Compression platens See table. Traceable certificate of surface hardness available on request. Wizard, Semi-Automatic power and control system Dual stage pump: low...
continue
General utility compression frames

Concrete - Compression frame only : General utility compression frames

General utility standalone frames for testing cubes and cylinders 50-C13Z00, 50-C23Z00 and 50-C34Z00, 1500kN, 2000kN and 3000kN cap, frames consist of a rigid welded steel structure, with spherical seat and platens suitable for testing cylinders and cubes (see TECHNICAL SPECIFICATIONS table). Supplied...
continue
Shear hand vane tester

Soil - Field inspection testers: Shear hand vane tester

Two models available: 16-T0174 for field surface and deeper measures. Especially designed to measure the undrained shear strength (CU) of cohesive soils, consists of a cylindrical body with a torsional spring and three interchangeable vanes of different sizes used depending upon the expected...
continue
Pore water pressure measurement

Soil mechanics - Manual measuring system for triaxial : Pore water pressure measurement

Pore pressure can be precisely measured with this electronic system connected to the pressure transducers (eg. Our models 28-WF6300) fit to the triaxial cell by the de-airing block 28-WF6310 (for the Banded triaxial cells) or by the de-airing block 28-WF4459 (for the Standard triaxial cells). No need of Data...
continue
Submersible load cells

Soil mechanics - Electronic measuring system for triaxial : Submersible load cells

Submersible (internal) load cells have been designed to work inside the triaxial cells. They have a lower hysteresis and very good linearity together with a substantial over load safety feature. They are supplied complete with rams to suit \#banded-triaxial-cells-and-accessories\# and...
continue
Electro-mechanically operated Asphalt Mixture Performance Tester AMPTQube

Asphalt/bituminous mixture - AMPT - Asphalt Mixture Performance Tester: Electro-mechanically operated Asphalt Mixture Performance Tester AMPTQube

AMPTQube, based on the revolutionary EmS Electro-mechanical Servoactuated technology is suitable for QC / QA tests. AMPTQube grants a level of testing accuracy, quality, performance and range normally only achievable from complex and expensive machines. AMPTQube has been designed to be a fast and reliable...
continue
Servo-Hydraulic Universal Testing Machine UTM, 30 kN cap.

Asphalt/bituminous mixture - Universal Testing Machines UTM: Servo-Hydraulic Universal Testing Machine UTM, 30 kN cap.

Universal Testing Machines (UTMs), Servo-hydraulic, equipped with high performances environmental chambers and extensive suite of accessories offer the greatest flexibility to perform all advanced pavement materials tests, ideal for Research purposes, featuring higher loads from 30 to 250 kN, lower...
continue
UTS Neutron - Dynamic Materials Testing & Analysis Software

Asphalt/bituminous mixture - Dynamic testing accessories: UTS Neutron - Dynamic Materials Testing & Analysis Software

Increased flexibility and control with three platform license levels: UTS NEUTRON ESSENTIAL – Easy Testing to EN/ASTM/AASHTO UTS NEUTRON PERFORMANCE – Including graphical Test Editor UTS NEUTRON DEVELOPER – Advanced test creator (for programmers only) Increased...
continue
Automatic 500/1000kN testing machines for steel and concrete

Universal testers - Steel (re-bars) - 500/1000 kN tension/compression UTM for steel and concrete: Automatic 500/1000kN testing machines for steel and concrete

Introduction This machine has been designed for use, in the field or laboratory to perform tension tests on steel rebars up to 26 mm dia. and compression tests on cylindrical concrete specimens up to dia. 160x320 mm and cubes up to 150 mm, using the appropriate accessories.  The system includes the UTM...
continue
Small and big shear test accessory

Universal testers - Steel (re-bars) - Test accessories for UTM - HPT Series: Small and big shear test accessory

Small and big shear test attachments including: - Small double shear test with 5 sets of bushes for shear test of  5, 8, 12, 16 and 20 mm dia. - Big double shear test with 5 sets of bushes for shear test of 25, 30, 35 and 40 mm dia. 
continue
Rock testing accessories

Universal testers - Steel (re-bars) - Test accessories for UNIFRAME : Rock testing accessories

Accessory sets for testing rock samples with UNIFRAME machines. Suitable for all UNIFRAME models if not otherwise specified. Single accessories needed for the same test are put together to make it easy for the user to choose the right setup. All items, however, can be ordered individually.
continue
Crack width gauges

Concrete - NDT Structural inspection and monitoring: Crack width gauges

Made from plastic. Used for measuring the crack widths in different positions: walls, corners, floors and difference of level. 
continue
Deep scanning metal locator

Concrete - NDT Durability test apparatus: Deep scanning metal locator

Finds rebar and metallic pipes, conduit, metal studs, junction boxes and metal framing up to 150 mm deep before drilling or remodeling. It scans through most non-metallic construction material, including solid concrete. 
continue
Automax SMART line, fully automatic tester

Concrete - SMART-Line control consoles : Automax SMART line, fully automatic tester

This introduction has been designed to fit all our models of compression and flexural frames ranging from 100 to 5000 kN. Has been further upgraded using the latest technologies thus maintaining a very competitive price. The Automatic compression testers fitted with the Automax System have been the most...
continue
Distance pieces to adjust the vertical daylight

Concrete - Accessories for Compression Testers: Distance pieces to adjust the vertical daylight

Made of steel. Used to reduce the vertical daylight of the compression machine depending on the size of the specimen and considering that, in general, the maximum piston travel is 50 mm. The following sketch and table are a suitable application guide to help you in the selection of required distance pieces.
continue
50 mm three gang cube mould

Cement - Preparation of specimens - Moulds and vibrating apparatus: 50 mm three gang cube mould

The 50 mm cube specimens are produced for compression test. The dimension is compatible with ASTM C109. Made from steel, precisely machined. Weight approx.: 6 kg
continue
Combined constant or falling head apparatus

Soil - Permeability apparatus: Combined constant or falling head apparatus

Used for both constant or falling head methods for determining the soil permeability. The apparatus consists of a two section plastic chamber, a plated steel top with gaskets, a plastic funnel reservoir 550 mm max. head with reservoir upright, a 100 cc pipette, and two porous stones 63.5 mm dia. x 12.7 mm...
continue
Core Drilling Machine, KorBit

Asphalt/bituminous mixture - Cutting and coring machines: Core Drilling Machine, KorBit

Asphalt core drilling machine to take samples from cores up to 150 mm dia. Robust and rigid frame fitted with a 3 selected motor speeds. Complete with adjustable clamps for cylindrical asphalt samples up to 150 mm. Designed, in particular, for coring samples 100 mm dia.,150 mm high for Dynamic Modulus...
continue
Dial thermometers

General lab - Thermometers: Dial thermometers

continue
Hygrometer

General lab - Meteorological equipment: Hygrometer

A simple unit designed for general purpose use. Two undivided thermometers are mounted on a printed plastic scale. Between the thermometers is a unique slide with pointer, which allows relative humidity to be easily read. The scale is housed in a plastic case, which also holds a reservoir with anti-frost...
continue
Filter flasks

General lab - Laboratory glassware: Filter flasks

continue
Evaporating dishes

General lab - Porcelain and various: Evaporating dishes

continue
Gloves

General lab - Plasticware: Gloves

continue
Scoops

General lab - Laboratory hardware: Scoops

continue
Dessicator cabinet

Soil - Moisture content determination equipment: Dessicator cabinet

Used to store and maintain dry the soil sample previously dried in oven to avoid the absorption of the air humidity until the complete cooling. Made from transparent plastic for a clear view of content. The unit include an internal metal frame with adjustable shelves. The cabinet has to be normally completed...
continue
Air pressure controller and water volume change for unsaturated soils triaxial tests - AUTOTRIAX 2

Soil mechanics - AUTOTRIAX 2 - Automatic triaxial testing equipment: Air pressure controller and water volume change for unsaturated soils triaxial tests - AUTOTRIAX 2

Servoflow air pressure controller ( for unsaturated soil test) The Servoflow  is an electro-pneumatic pressure controller that generates air pressures of up to 1000 kPa for one pressure line.  Managed under closed-loop control by the Data acquisition and control unit that it...
continue
Automatic compression testers for cubes, cylinders and blocks PILOT

Concrete - General utility compression testers, COMPACT-Line: Automatic compression testers for cubes, cylinders and blocks PILOT

Frame Rigid welded steel construction. Spherical seat allows free alignment at the initial contact with the specimen. Compression platens See table. Traceable certificate of surface hardness available on request. Pilot, Automatic power and control system Dual stage pump, centrifugal for fast...
continue
Concrete workabilimeter

Concrete - Workability and consistency of fresh concrete: Concrete workabilimeter

Used to verify the homogeneity of concrete in relation to its workability or plasticity. This test method has particular application for concretes containing chemical admixtures. The apparatus consists of a metal box divided into two parts and fit with an electrical vibrator system. During operation the...
continue
Double burette volume change apparatus

Soil mechanics - Manual measuring system for triaxial : Double burette volume change apparatus

The apparatus comprises two measurement tubes, which have a 25 ml burette mounted internally  and an acrylic tube externally. The burette tubes are connected directly to a reversing valve system, which is used to reverse the direction of travel of the interface in the measurement tubes without affecting...
continue
Pressure transucers for triaxial test

Soil mechanics - Electronic measuring system for triaxial : Pressure transucers for triaxial test

Pressure transducers are used for the measurement of cell pressure, back pressure, pore pressure (water or air).They have to be connected to triaxial cells by the suitable De-airing block. See accessories. The transducers are base on the extensimetric measurement principle with strain gauges on the metal...
continue
Servo-Hydraulic Universal Testing Machines UTM, 130 kN cap.

Asphalt/bituminous mixture - Universal Testing Machines UTM: Servo-Hydraulic Universal Testing Machines UTM, 130 kN cap.

Universal Testing Machines (UTMs), Servo-hydraulic, equipped with high performances environmental chambers and extensive suite of accessories offer the greatest flexibility to perform all advanced pavement materials tests, ideal for Research purposes, featuring higher loads from 30 to 250 kN, lower...
continue
Semi-Circular Bend (SCB Test) for UTM, AST Pro, AsphaltQube, AMPT Pro and AMPTQube

Asphalt/bituminous mixture - Dynamic testing accessories: Semi-Circular Bend (SCB Test) for UTM, AST Pro, AsphaltQube, AMPT Pro and AMPTQube

continue
Semi-automatic 500/1000kN testing machines for steel and concrete

Universal testers - Steel (re-bars) - 500/1000 kN tension/compression UTM for steel and concrete: Semi-automatic 500/1000kN testing machines for steel and concrete

Introduction This machine has been designed for use, in the field or laboratory to perform tension tests on steel rebars up to 26 mm dia. and compression tests on cylindrical concrete specimens up to dia. 160x320 mm and cubes up to 150 mm, using the appropriate accessories.  Load measurement and data...
continue
Shouldered and Threaded specimens test accessory

Universal testers - Steel (re-bars) - Test accessories for UTM - HPT Series: Shouldered and Threaded specimens test accessory

Shouldered and Threaded specimens test attachment including: - Bare Attachment (2 pcs) - 1 Set of 2 split bushes with springs for Dia 20 and 22 mm shouldered specimen - 1 Set of 3 threaded bushes for  M12, M16 and M20 threaded specimen
continue
Concrete, cement and masonry building testing accessories

Universal testers - Steel (re-bars) - Test accessories for UNIFRAME : Concrete, cement and masonry building testing accessories

Accessory sets for testing cement, concrete and masonry building units samples with UNIFRAME machines. Suitable for all UNIFRAME models if not otherwise specified. Single accessories needed for the same test are put together to make it easy for the user to choose the right setup. All items,...
continue
Crack width microscope

Concrete - NDT Structural inspection and monitoring: Crack width microscope

A high quality microscope designed for measuring crack widths in concrete members, masonry walls and other structures. The apparatus operates by an adjustable lamp unit and the image is focused by turning a knob. The eyepiece scale can be turned through 360° to align with the direction of the crack or...
continue
Slotted distance pieces

Concrete - Accessories for Compression Testers: Slotted distance pieces

Made of steel. Used to reduce the vertical daylight of the compression machine model 50-A39xxx depending on the size of the specimen and considering that, in general, the maximum piston travel is 50 mm.  Slotted distance pieces are inserted between the upper crossbar and the spherical seat. To...
continue
Pavement core drilling machine

Asphalt/bituminous mixture - Cutting and coring machines: Pavement core drilling machine

This simple but rugged machine is a portable unit, which can be easily carried in a pick-up truck. The powerful 6 HP engine is more than adequate for all types of work and materials. The relatively heavy weight (110 kg) contribute to the machine stability during coring. The core bits we propose have fixed...
continue
Soil colour charts

Soil - Soil sampling equipment: Soil colour charts

The Munsell Soil Color Charts are an affordable way to evaluate the type of soil that is present within a given area. The book is set up to make soil color evaluations in the field quickly and easily. The soil classification system that has been developed around Munsell Color System is an established and...
continue
Digital thermometers

General lab - Thermometers: Digital thermometers

The proposed standard models (82-D1226 to 82-D1228), which cover practically all applications in the construction industry as specified in the table. The Multipurpose 82-D1229 Microprocessor controlled model is for professional use and, fit with the suitable probe (see accessories), can be used for...
continue
Thermohygrograph

General lab - Meteorological equipment: Thermohygrograph

Simultaneous recording of both temperature and humidity. Supplied complete with 100 charts, 2 pens and instruction manual. Temperature range -35 to +45°C Humidity range: 0 to 100% Time scale: 24 hours or 7 days Overall dimensions: 375x290x230 mm Weight approx.: 5...
continue
Weighing bottles

General lab - Laboratory glassware: Weighing bottles

continue
Load ring penetrometer

Soil - Field penetrometers: Load ring penetrometer

Used for measuring the bearing strength and compaction degree of soils. The apparatus consists of a “T” shaped handle connected to a load ring 1 kN (100 kgf) cap., with max load pointer, and of an extension rod with five 100 mm graduations. The 30° end cone has an area of 645 mm2 (I sq. in)....
continue
Water level indicators

Soil - Field inspection testers: Water level indicators

Used for determining the water level in boreholes, wells and other open underground structures. Drum mounted, with an ON/OFF indicator and audio signal when probe touches water. The sensing portion of the probe has a stainless steel tip with plastic shielding to prevent false readings. Probe diameter of 10 mm...
continue
Automatic volume change apparatus

Soil mechanics - Electronic measuring system for triaxial : Automatic volume change apparatus

This apparatus, when connected to a suitable display or data acquisition system, provides an electrical signal directly proportional to the volume of water flowing through the unit. The apparatus comprises a piston connected to a 25 mm travel linear transducer and sealed against a precision-machined...
continue
Environmental chambers for Universal Testing Machines UTM

Asphalt/bituminous mixture - Universal Testing Machines UTM: Environmental chambers for Universal Testing Machines UTM

IPC Global's environmental chambers use a high quality mechanical refrigeration system and superior insulation technologies to enable users to analyze materials' properties at real-life working temperatures (up to -50 to 80/100° C) for extended periods without the need of LN2. High accuracy and...
continue
Flat Jacks

Concrete - NDT Structural inspection and monitoring: Flat Jacks

Introduction The in-situ stress, deformability and resistance feature of masonry can be determined by the flat jack method . The test is performed by making a cut to a uniform depth into the mortar courses and inserting the flat jack or couple of jacks, which are pressurized to the desired level. Test...
continue
Pullout test apparatus

Concrete - NDT Strength evaluation apparatus: Pullout test apparatus

Used for determining the pullout strength of hardened concrete in test specimens or structures by measuring the force required to pull an embedded metal insert and the attached concrete fragment from a concrete mass. The pullout test apparatus 58-C0178 is used for pre-embedded inserts in fresh concrete...
continue
Frame pedestals

Concrete - Accessories for Compression Testers: Frame pedestals

All the pedestals in the range are made of steel and are designed to make use of the compression machine straightforward, providing easy specimen loading and machine control.
continue
pH papers

Soil - Chemical tests apparatus: pH papers

Used for determining the pH of aqueous solutions.
continue
Accessories for Marshall compression testers

Asphalt/bituminous mixture - Marshall compression testers: Accessories for Marshall compression testers

The majority of the proposed models concern the tension test of reinforcing bars. In particular, the High capacity steel tensile testers have been specifically designed to test reinforcing bars. The front loading of specimens, the hydraulic gripping system, the remote control and the fully automatic test...
continue
Glass thermometers for general laboratory use

General lab - Thermometers: Glass thermometers for general laboratory use

continue
Petri dish, Test tubes, Watch glass

General lab - Laboratory glassware: Petri dish, Test tubes, Watch glass

continue
Spatulas

General lab - Laboratory hardware: Spatulas

continue
Waltz container

Concrete - Workability and consistency of fresh concrete: Waltz container

The apparatus consists of a metal box with handles. Dimensions: 200x200x400 (h) mm Weight approx.: 5 kg
continue
Proctor penetrometer

Soil - Field penetrometers: Proctor penetrometer

Used for establishing the moisture content-penetration resistance relationship of fine-grained soils. It consists of a special spring dynamometer with pressure indicating scale on the stem of the handle. A sliding ring on the stem indicate the maximum pressure obtained in the test. Supplied in a wooden...
continue
Introduction to Modular Asphalt Testers

Asphalt/bituminous mixture - Universal Testing Machines UTM: Introduction to Modular Asphalt Testers

Over the last 25 years we have worked closely with Govenment Highway Authorities, Universities, Asphalt producers, Road Constructors and Research Organization to pioneer the world's best and most innovative range of advanced asphalt testing systems. The AST Pro belies the power and versatility of...
continue
Deflectometers

Concrete - NDT Structural inspection and monitoring: Deflectometers

Used for determining the deflection of bridges, ceilings or any suspended structure. Comprising: swing arm with clamp for total orientation in any position q.ty 3; wire coil 20 m q.ty 3; dial gauges 30x0.01 mm q.ty 3; plumb weight q.ty 3; carrying case. Weight approx.: 3 kg
continue
Chloride field test set

Concrete - NDT Durability test apparatus: Chloride field test set

This test set, which correlates to ASTM C114 and AASHTO T260, is used for the determination of the chloride ion concentration in concrete to enable the identification of the risk of chloride induced reinforcement bar corrosion. The method involves an acid extraction of a representative drilled sample of...
continue
Marsh funnel viscometer

Cement - Building lime, grout and mud testing apparatus: Marsh funnel viscometer

Marsh funnel is used for routine viscosity determinations on almost every drilling rig. Made of rugged, break-resistant plastic that resist to the temperature change deformation. Volumetric accuracy is assured. Plastic handle provides insulation for user’s hand. A metal orifice assures accurate...
continue
Magnetic stirrers

Soil - Chemical tests apparatus: Magnetic stirrers

Used for titration and stirring. Variable speed. Magnetic Teflon coated follower included. 81-B0145/D version feature a hot plate wich can be useful for particular applications.
continue
Hydraulic consolidation cell for unsatureted samples

Soil mechanics - Consolidation apparatus: Hydraulic consolidation cell for unsatureted samples

The Hydrocon SWCC consolidation apparatus is used to determine the magnitude and rate of settlement and pressure of unsaturated soil specimens. Because of the low permeability of some materials, performing a drying and wetting stage can take several weeks. The Hydrocon SWCC cell is a flexible soil...
continue
Specific gravity bottles

General lab - Laboratory glassware: Specific gravity bottles

Mineral aggregates are used in all fields of the construction industry to produce bituminous misture, concrete, mortars to be used in structures, fill materials, railway ballast etc. For this reason we have given particular attention to all testing methods. The EN Standards have grouped all tests on...
continue
Trolley, Carts

General lab - Laboratory hardware: Trolley, Carts

Sample cart 86-D1700 Useful for handling concrete samples or moulds in the laboratory. Constructed in steel with rubber wheels mounted on bearings. Shelf size: 1025x600 mm, total height 1000 mm Weight approx.: 45 kg Laboratory trolley 86-D1701 Useful for general use. Shelf size:...
continue
Modular Servo Hydraulic Asphalt Tester AST Pro

Asphalt/bituminous mixture - Universal Testing Machines UTM: Modular Servo Hydraulic Asphalt Tester AST Pro

The AST Pro belies the power and versatility if this fully integrated modular system. AST Pro is based on the tried and tested technology of the AMPT Pro and its high performance servo-hydraulic labyrinth bearing actuator. Now you can perform all the most common asphlt test standards in one high...
continue
Compression test accessory

Universal testers - Steel (re-bars) - Test accessories for UTM - HPT Series: Compression test accessory

continue
Lifting assembly for block testing platens

Concrete - Accessories for Compression Testers: Lifting assembly for block testing platens

All the compression testers or frames series 50-C25xxx, 50-C35xxx, 50-C47xxx, 50-C57xxx, 50-C69xxx and 50-C79xxx, are factory upgraded with upper and lower block platens 510x310mm. For easier placement of distance pieces to reduce, when necessary, the vertical daylight we suggest the use of the lifting...
continue
Mud balance

Cement - Building lime, grout and mud testing apparatus: Mud balance

The mud balance provides a simple method for the accurate determination of mud density. The durable construction make it ideal for field use. Principally the balance consists of a base and graduated arm with cup, lid, knife-edge, rider, built-in spirit level, and counter-weight. The constant volume cup is...
continue
Slotted steel weights

Soil mechanics - Shear testing equipment: Slotted steel weights

Used for consolidation (oedometers), shear testing machines and other applications. Manufactured from steel. Protected against corrosion. Accurately calibrated assuring the specified tolerance.
continue
Round bottom flasks

General lab - Laboratory glassware: Round bottom flasks

continue
Rubber tubes and stoppers

General lab - Laboratory hardware: Rubber tubes and stoppers

continue
Modular Electro-mechanically operated Asphalt tester AsphaltQube

Asphalt/bituminous mixture - Universal Testing Machines UTM: Modular Electro-mechanically operated Asphalt tester AsphaltQube

AsphaltQube is a fully integrated standard testing system based on the revolutionary EmS Electro-mechanical Servoactuated technology, suitable for QC / QA tests. Now you can perform the most common asphalt standards in one compact, modular, easy to use machine. The flexible system allows you to perform...
continue
Accessory for electrowelded screen

Universal testers - Steel (re-bars) - Test accessories for UTM - HPT Series: Accessory for electrowelded screen

continue
Centering device for specimens

Concrete - Accessories for Compression Testers: Centering device for specimens

Centering device for 100 mm, 150mm, 160mm and 200mm specimens suitable for frames and compression machines fitted with round platens 300 mm and 216mm diameter, or square platens 305mm side.
continue
Specimen grinding machine

Rock mechanics - Sample preparation equipment: Specimen grinding machine

The word concrete comes from the Latin word "concretus" that means compact or condensed; in fact it is well known that since the second century the Romans mixed quicklime with pozzolan to enhance its hydraulic properties and then mixed it with aggregates in order to obtain a robust stone-like...
continue
Pipettes and burettes

General lab - Laboratory glassware: Pipettes and burettes

continue
Brushes

General lab - Laboratory hardware: Brushes

continue
Melting pot

Soil - Sample preparation : Melting pot

Used to melt wax toi seal the soil samples and other materials. The temperature is set and maintained at the desired value. Adjustable thermostat and pilot lamp fully isolated conforming to CE requirement. Complete with cover. Capacity: 5 l approx. Temperature range: +30 to...
continue
Air and Water permeability test set. John Figg method

Concrete - NDT Durability test apparatus: Air and Water permeability test set. John Figg method

This method covers the determination of susceptibility to chloride and carbonation penetration into the concrete. The apparatus can be used for: Internal (deep permeability) test A hole 10 mm dia., 40 mm deep is drilled and plugged leaving a cylindrical test void 10 mm dia. 20 mmhigh, situated 20 mm...
continue
Rigid front door

Concrete - Accessories for Compression Testers: Rigid front door

General utility and ASTM frames/machines series are standard mounted with front and rear flexible fragment guard. As accessory it is possible to upgrade them with a front rigid door. All our EN compression frames/machines series are already fitted with front rigid door and rear flexible fragment...
continue
Accessories for CBR loading presses

Soil - CBR loading presses: Accessories for CBR loading presses

The majority of the proposed models concern the tension test of reinforcing bars. In particular, the High capacity steel tensile testers have been specifically designed to test reinforcing bars. The front loading of specimens, the hydraulic gripping system, the remote control and the fully automatic test...
continue
Glass funnels

General lab - Laboratory glassware: Glass funnels

continue
General tools

General lab - Laboratory hardware: General tools

continue
Laboratory digital planetary mixer

Soil - Sample preparation : Laboratory digital planetary mixer

Two great companies with compelling stories, IPC Global, a pioneer and global leader for 25 years in Dynamic Asphalt Testing Equipment and Controls, a major player with 50 years' experience in the Construction Materials Testing Equipment have united to become the Advanced Pavements Testing Systems...
continue
Glass marking pencils

General lab - Laboratory glassware: Glass marking pencils

continue
Surveymaster SM. Protimeter

Concrete - NDT Durability test apparatus: Surveymaster SM. Protimeter

The Surveymaster is the industry standard moisture meter for surveying and investigation moisture in buildings. Two operation modes: search and measure, helping the user to distinguish sub-surface from surface moisture, essential information when trying to establish the extent and cause of a dampness problem....
continue
Beakers

General lab - Laboratory glassware: Beakers

continue
Dessicators

General lab - Laboratory glassware: Dessicators

Made from glass, complete with dessicator plate. Safety cage for vacuum dessicators also available. See Accessories. As alternative to standard dessicators see Dessicator cabinet.
continue
Sand content of drilling muds

Cement - Building lime, grout and mud testing apparatus: Sand content of drilling muds

This kit provides a complete sieve analysis apparatus for determining the sand content of drilling muds. It consists of a special 2¼” diameter 200-mesh sieve, fastened inside a collar with a small funnel fitted top and bottom.  
continue
Filter press for muds

Cement - Building lime, grout and mud testing apparatus: Filter press for muds

Measuring filtration behaviour and wall-coke building characteristics of fluids is essential to drilling fluid control and treatment. This apparatus is the most effective means of determining the filtration properties of drilling muds and cement slurries. It consists essentially of a mud reservoir...
continue
Conical flasks

General lab - Laboratory glassware: Conical flasks

continue
V-Funnel apparatus

Concrete - SCC testing apparatus: V-Funnel apparatus

Used to determine the V-funnel flow time. The test is not suitable when the maximum size of the aggregate exceeds 20 mm. The apparatus consists of a stainless steel V shaped frame fit with a watertight sliding gate and supported by a frame to assure the top funnel horizontal. Overall dimensions:...
continue
Gyratory compactors for cement and concrete - GALILEO

Concrete - Gyratory compactors for cement and concrete: Gyratory compactors for cement and concrete - GALILEO

This method, very popular in Scandinavia, is used for mix design and quality control mainly in concrete products plants, where low workable and zero slump concrete is used (for such products as hollow-core slabs, tubes and paving blocks). The method is used for: mix design simulating selected production...
continue
L-Box apparatus

Concrete - SCC testing apparatus: L-Box apparatus

Used for determining the passing ratio of self compacting concrete. The apparatus consists of a L shaped stainless steel frame, supplied complete with filling hopper. Overall dimensions: 700x200x600 mm Weight approx.: 18 kg
continue
Gyratory compactors for cement and concrete

Concrete - Gyratory compactors for cement and concrete: Gyratory compactors for cement and concrete

This method, very popular in Scandinavia, is used for mix design and quality control mainly in concrete products plants, where low workable and zero slump concrete is used (for such products as hollow-core slabs, tubes and paving blocks). The method is used for: mix design simulating selected production...
continue
Vibrating plate

Concrete - Concrete compaction : Vibrating plate

Light and portable, operated by the car lighter, is ideal for field use. Suitable for vibrating plastic mould up to 150 mm and cylinder moulds up to dia. 160x320 mm. Supplied complete with elastic cord to fit the mould on the vibrating plate.
continue
Concrete, asphalt, rock and masony saw

Concrete - Sample cutting: Concrete, asphalt, rock and masony saw

This universal saw, completed with the suitable accessory, can be used to cut concrete, asphalt and rock cores, and irregular rock samples in order to obtain geometrically defined samples. It can be fit with 300 to 450 mm dia. blades. The head is adjustable in height. The tilting motor head permit cuts up to...
continue
Universal concrete and asphalt saw, MULTISAW

Concrete - Sample cutting: Universal concrete and asphalt saw, MULTISAW

Two great companies with compelling stories, IPC Global, a pioneer and global leader for 25 years in Dynamic Asphalt Testing Equipment and Controls, a major player with 50 years' experience in the Construction Materials Testing Equipment have united to become the Advanced Pavements Testing Systems...
continue
Ultrasonic cleaning apparatus

Aggregates - Sieves: Ultrasonic cleaning apparatus

Used to achieve a through cleaning of test sieves without causing distortion. This apparatus is particularly suitable for fine mesh sieves which could be damaged using ordinary cleaning methods (brushes or shock on frame). Complete with timer, sieve rack and lid.
continue
Impact soil tester

Soil - Impact soil tester: Impact soil tester

Used to obtain an indication of the degree of compaction of soil in road construction. Results can be directly correlated to the CBR test. The unique microprocessor system automatically checks all readings throughout the test and displays the fourth reading as the Impact Value. An essential trench control...
continue
Consolidation bench for shear boxes

Soil mechanics - Consolidation benches: Consolidation bench for shear boxes

Used to apply a constant load on a sample placed on a shear box to reduce the testing time when more than one sample has to be tested and one machine onlly is available. It consists of a steel frame complete with centering plates and three load frames carrying the weights and three loading devices with load...
continue
Data acquisition unit, GEODATALOG 8

Soil mechanics - Data acquisition and processing system for soil mechanics: Data acquisition unit, GEODATALOG 8

GEODATALOG 8  is a multipurpose data logger which works directly connected to a PC. Data are automatically transferred to the PC in real time for live monitoring of the tests progress. GEODATALOG 8 records and monitors in real time the measurements requested for soil mechanics testing, as:...
continue
Marking off machine

Universal testers - Steel (re-bars) - Marking off machine: Marking off machine

Marking off machine. This simple and useful machine is used to mark off steel specimens before tensile testing. It is operated by rotating the handle. The carriage holding the specimen moves laterally by 5, 10 or 20 mm steps and the tool marks off the specimen at the desired intervals. Max...
continue
Flexure testing device for clay portion

Universal testers - Steel (re-bars) - Flexure testing device for clay portion: Flexure testing device for clay portion

This device is used to perform the flexure test on a strip obtained from the internal walls of the clay block. It consists of a top loading digital balance cap. 20 kg. x 0.1 g fit with a flexure device. The load is applied by rotating a knob and is directly read on the balance display which hold the failure...
continue
Air bath

Bitumen - Air bath: Air bath

Used for softening bituminous materials before tests. The stainless steel vessel can receive up to 600 g of bitumen. Built in thermoregulator. Heat protection. Power: 600 W Dimensions: 170x230x300 mm Weight approx.: 3 kg
continue
Solvent recovery unit

Asphalt/bituminous mixture - Solvent recovery unit: Solvent recovery unit

Used to recover the solvent liquid after its use for the extraction tests. This unit has been designed to recover non-flammable solvents and consists of two stainless steel chambers, one for dirty solvent and the other for the cleaned solvent. An electric heater in the left-hand chamber distils the solvent,...
continue
Fume exhaust cupboard with aspirator

Asphalt/bituminous mixture - Fume exhaust cupboard with aspirator: Fume exhaust cupboard with aspirator

The extraction method of the EN 12697-1 and corresponding ASTM standards, often require toxic solvent  (e.g. methylene chloride). This solvent is hazardous to health and is subject to occupational exposure limits as described in relevant legislation and regulations. This Fume exhaust cupboard, fit with...
continue
Travelling beam for detecting  surface irregularities

Asphalt/bituminous mixture - Travelling beam for detecting surface irregularities : Travelling beam for detecting surface irregularities

The apparatus is used for detecting the road surface irregularity. It can be used either for concrete or asphalt pavements. The apparatus consists essentially of a beam with rigid wheels at the extremities and a wheel at the middle, which can detect any vertical deviation of the surface from a straight-line...
continue
Permeameter for draining pavements

Asphalt/bituminous mixture - Asphalt permeameters: Permeameter for draining pavements

For measuring the water percolation time through the draining pavements. The apparatus comprises a graduated transparent cylinder, a metal support, a rubber gasket and a 20 kg counterweight with handles. Weight approx.: 21 kg
continue
Permeameter for draining pavements. Autostrade method

Asphalt/bituminous mixture - Asphalt permeameters: Permeameter for draining pavements. Autostrade method

For measuring the water percolation time through the draining pavements. Transparent cylinder, 150 mm dia., 390 mm high. Weight approx.: 6 kg  
continue
Rock piks and hardness scale

Rock mechanics - Rock piks and hardness scale: Rock piks and hardness scale

Used for preliminary rock identification. 45-D1710 Fully polished, leather grip. Weight approx.: 650 g 45-D1711 Fully polished, nylon vinyl grip. Weight approx.: 550 g
continue
Rock permeability equipment

Rock mechanics - Rock permeability equipment: Rock permeability equipment

This apparatus, originally designed for soil mechanics test applications, can also be used to provide an infinitely variable constant pressure and is used in conjunction with the Hoek cell fit with the permeability end caps, for the investigation of the permeability of rock at high confining pressure, in the...
continue
Profilometers (Barton comb)

Rock mechanics - Profilometers (Barton comb): Profilometers (Barton comb)

Used for measurement of the roughness profile of rock samples.
continue
Joint roughness coefficient test device

Rock mechanics - Joint roughness coefficient test device: Joint roughness coefficient test device

It is used to calculate the JRC of a rock or joint. The device consists of an adjustable inclined plane, on which the rock sample (100 mm max dia.) is placed, separated along the surface where the roughness is to be measured. Then the plane is slowly tilted until sliding of the upper part of the sample on the...
continue
General purpose ovens

General lab - Ovens and hot plates: General purpose ovens

Specially designed for the testing laboratories of the construction industry. The internal and external walls made from zinc coated steel isolated with mineral wool. Front door made from stainless steel. Exaust holes for fast cooling. 100 liters 10-D1390/10 model feature natural convection, the other 250 and...
continue
General purpose melting pot

General lab - General purpose melting pot: General purpose melting pot

Used mainly to melt the capping compound for concrete cylinder capping and  to melt wax to seal the soil samples and other materials. The temperature is set and maintained at the desired value. Adjustable thermostat and pilot lamp fully isolated conforming to CE requirement. Complete with...
continue
Digital hot plates

General lab - Ovens and hot plates: Digital hot plates

Designed to meet laboratory daily heating requirements. Digital temperature controller and aluminium heating surface.
continue
General utility hot plates

General lab - Ovens and hot plates: General utility hot plates

Used in the laboratory for a large variety of applications. One versions: temperature control by a thermostat featuring a better  temperature adjustment. Other models available with large rectangular plate and digital control, for more advanced applications. See \#digital-hot-plates\#. Plate...
continue
Microwave oven

General lab - Ovens and hot plates: Microwave oven

Particularly suitable for high speed drying applications in the laboratory, such as drying, conditioning, pre-heating and moisture determination. Power: 900 W Weight approx.: 28 kg
continue
Air drier

General lab - Ovens and hot plates: Air drier

Used to dry small quantities of soil and aggregate particles and useful for other general laboratory purposes. Specifically used in the surface drying of aggregates. 1100 W Weight approx.: 1.5 kg
continue
Analytical balance

General lab - Balances and weights: Analytical balance

This model is particularly suitable for cement-heat of hydration testing- where a very high accuracy is requested.
continue
Standard calibration masses

General lab - Balances and weights: Standard calibration masses

These weights are used for periodic checking of the balances. Class M1, brass weights tolerance ±50 ppm at I kg level. The calibrated models, identified by the suffix “C1” are supplied complete with wooden box and Official Accredia certificate. Other calibration masses class F1 and F2 are...
continue
Dial indicators

General lab - Linear displacement indicators: Dial indicators

Dial gauge indicators are used for a wide range of applications throughout the various products lines. They feature 58 mm dia., clockwise rotation, complete with rear mount. Digital models also available. See \#digital-dial-indicators\#. Weight approx.: 150 g
continue
Digital dial indicators

General lab - Linear displacement indicators: Digital dial indicators

Digital dial indicators are used for a wide range of applications throughout the various product lines. They feature 58 mm dia., complete with rear mount and serial output. For standard dial gauge indicators see \#dial-indicators\#.  
continue
Pressure transducers

General lab - Pressure transducers: Pressure transducers

They provide a very accurate electrical signal strictly proportional to the pressure of the hydraulic circuit of the testing machine or apparatus. Featuring fully sealed stainless steel pressure chambers and diaphragms. The transducer use a full Wheatstone bridge circuit. The 50-Q50/PT model, mainly used for...
continue
Linear potentiometric transducers

General lab - Linear displacement indicators: Linear potentiometric transducers

They provide an electrical signal proportional to the linear shaft displacement. The transducers are housed in a incorrodable metal case. The extremely low spring force on spindle and the excellent linearity make these transducers ideal for laboratory use. Two versions available: Standard and complete with...
continue
LVDT transducers

General lab - Linear displacement indicators: LVDT transducers

These high-precision displacement transducers are controlled by the position of a magnetic core which provides an output of voltage that is proportional to the position of the transducer stem. It is also possible to receive the transducer complete with a traceable certificate of calibration, when...
continue
Strain gauge load cells, 2.5 to 50 kN cap.

General lab - Strain gauge load cells, 2.5 to 100 kN cap.: Strain gauge load cells, 2.5 to 50 kN cap.

The strain gauge load cells are used to measure the force applied. They provide a very accurate electrical signal strictly proportional to the applied load. This kind of gauges are used in various test applications with low capacity universal testers. High capacity load cells, normally used for calibration...
continue
Strain gauge transducers

General lab - Linear displacement indicators: Strain gauge transducers

These displacement transducers are the most covenient solution granting high-precision. It is also possible to receive the transducer complete with a traceable certificate of calibration, when purchased along with a suitable data acquisistion system.   Linear potentiometric models also...
continue
DIGIMAX TOUCH screen readout and data acquisition unit for CBR, Marshall, Indirect tensile and universal tests

General lab - Multipurpose data logger for automatic data acquisition: DIGIMAX TOUCH screen readout and data acquisition unit for CBR, Marshall, Indirect tensile and universal tests

Based on the latest electronics technologies this modern readout unit offers advanced performances and outstanding electronics features. Effective resolution, sampling rate, accuracy and stability of the readings, touch screen sensitivity and reaction time, network connectability, calibration functions, are...
continue
Data acquisition unit DATALOG 8

General lab - Multipurpose data logger for automatic data acquisition: Data acquisition unit DATALOG 8

DATALOG 8 is a stand alone data logger for general purpose acquisition, processing and data storage for laboratory applications. DATALOG 8 records and monitors in real time the measurements requested by different tests, for example: Elastic modulus determination with Uniaxial and Triaxial testing...
continue
Data acquisition unit DATALOG 8 - Battery operated version designed for in-field applications

General lab - Multipurpose data logger for automatic data acquisition: Data acquisition unit DATALOG 8 - Battery operated version designed for in-field applications

DATALOG 8 is a stand alone data logger for general purpose acquisition, processing and data storage for laboratory and site applications.   Differently from the laboratory version, this model is housed inside a rigid carrying case with a long-life rechargeable battery. It is particularly suitable for...
continue
Stopwatch and Digital timer

General lab - Stopwatch and Digital timer: Stopwatch and Digital timer

continue
Air compressors

General lab - Air compressors: Air compressors

Both models are ideal for laboratory use. The 86-D2015/A model is particularly suited for use with the DYNATRIAX Dynamic triaxial system.  
continue
Chemicals and reagents

General lab - Chemicals and reagents: Chemicals and reagents

continue
Filter paper

General lab - Filter paper: Filter paper

continue