- For testing all standard concrete beams, kerbs, flagstones, pipes etc., using the suitable accessory
- Large testing space, adjustable vertical clearance
- Two versions: with pressure transducer and load cell granting high accuracy for testing low strength specimens
- Connectable to control consoles, Automax and Pilot 4 compression machines
- Piston travel limit switch included
Universal flexural frames 150 kN cap., with adjustable vertical clearance
EN 1339 | EN 1340 | EN 12390-5 | ASTM C78 | ASTM C293
|Max cap. kN||150||150|
|Load sensor||Pressure transducer||Load cell|
|Horizontal clearance [mm]||660||660|
|Max. vertical clearance [mm]||with C1400/8||483||443|
|with C1400/3 (upper punch)||405||365|
|with C1400/3 (upper bearer)||510||470|
|with C1200/4 and lower bearers included in C1400/3||458||418|
|Distance between upper rollers (adjustable) mm||100, 150, 200, or single roller||100, 150, 200, or single roller|
|Distance between lower rollers (adjustable) mm||100 - 1200||100-1200|
|Piston travel mm||110||110|
|Overall dimensions (lxwxh) mm||860x1400x1500||860x1400x1500|
|Weight approx. kg||224||224|
150 kN cap. flexural frame with adjustable vertical clearance, complete with pressure transducer and connection kit for separate control console. Bearers not included.
150 kN cap. flexural frame with adjustable vertical clearance, complete with load cell and connection kit for separate control console. Bearers not included.
Accessory for testing flagstones and kerbs to EN 1339 and EN 1340, including two loading supports and central loading roller 620 mm long, 40 mm dia. and top loading swivel jointed pad 40 mm dia. Weight approx.: 23 kg.
Upper and lower roller assembly for center and third point test on concrete beams 100x100x400/500 mm and 150x150x600/750 mm. Rollers 40 mm dia., 300 mm long to EN 12390-5 and ASTM C78. C293 Weight approx.: 45 kg.
Set of upper platen, spherically seated and lower platen 165 mm dia., for compression tests. Weight approx. 15 kg.
Upper loading swivel joint 40 mm dia for flexural tests to EN 1340 on concrete kerb units. Suitable for frame series 50-C120x. Lower rollers not included.
Accessory to complete 50-C1400/3 to perform the third point and centre point flexure test to EN 12390-5, including two rollers 30 mm long, 40 mm dia. (one rmovable for centre point test; support plate with cylindrical seat (roller span 100, 150 and 200 mm). Lower rollers not included. Weight approx.: 23 kg
UpgradingSpecial calibration procedures
The above upgrading is suitable if the frame is connected to automatic testing machines or control consoles.
AUTOMAX, Super- Automatic EN testers for cubes, cylinders and blocks Introduction The AUTOMAX Compact-Line, Super-Automatic compression testers, adopting the... more AUTOMAX E-Modulus console for Elastic Modulus and Poisson ratio determination The AUTOMAX E-Modulus is specifically designed for the determination of Elastic Modulus... more