Universal flexural frame, 100-150 kN cap.
EN 1339 | EN 1340 | EN 12390-5 | ASTM C78 | ASTM C293 | EN 14488-5 | ASTM C1609 | ASTM C1018
Typical application of a 50-C1201/BFR frame as part of a complete testing system controller by ADVANTEST 9 console. 50-C1201/BFR fitted with bearers model 50-C1200/8 50-C1200/BFR fitted with accessory 50-C1200/3 (upper punch) Detail of accessory 50-C1200/7 fitted on C1201/BFR frame Detail of accessory 50-C1200/9 fitted on C1200/BFR frame
- For testing all standard concrete beams, kerbs, flagstones etc., using the suitable accessory
- Large testing space
- Two versions: with pressure transducer and load cell granting high accuracy for testing low strength specimens
- Connectable to control consoles, Automax and Pilot compression machines
- Piston return by counterweights
- Piston travel limit switch included
This versatile flexural frame has been designed to test either standard concrete beams or other concrete products as the roomy testing place can accommodate large specimens. It is proposed in two versions: with pressure transducer, 150 kN cap., and with load cell, 100 kN cap., granting high accuracy for testing low strength specimens. All models are fit with piston travel limit switch and connection kit to the control console. Bearers not included. See accessories.
|Max cap. kN||150||100|
|Load sensor||Pressure transducer||Load cell|
|Horizontal clearance [mm]||720||720|
|Max. vertical clearance [mm]||with C1200/8||207||182|
|with C1200/3 (upper bearer)||232||207|
|with C1200/3 (upper punch)||213||188|
|with C1200/4 and lower bearers included in C1200/3||181||156|
|Distance between upper rollers (adjustable) mm||100, 150, 200, or single roller||100, 150, 200, or single roller|
|Distance between lower rollers (adjustable) mm||100 - 900||100-900|
|Piston travel mm||130||130|
|Overall dimensions (lxwxh) mm||950x1000x981||950x1000x981|
|Weight approx. kg||130||130|
150 kN cap. flexural frame, complete with pressure transducer and connection kit for separate control console. Rollers not included.
100 kN cap. flexural frame, complete with load cell and connection kit for separate control console. Rollers not included.
Roller bearing assembly for flexural frame serie C120x/BFR for centre and third-point loading tests to EN 12390-5, ASTM C78, C293. Bearers dimensions: 40mm dia. x 300mm
Accessory for testing flagstones and kerbs to EN 1339 and EN 1340, including two loading supports and central loading roller 620 mm long, 40 mm dia. and top loading swivel jointed pad 40 mm dia. Weight approx.: 45 kg
Accessory to complete 50-C1200/3 to perform the third point and centre point flexure test to EN 12390-5, including two rollers 30 mm long, 40 mm dia. (one rmovable for centre point test; support p’late with cylindrical seat (roller span 100, 150 and 200 mm). Lower rollers not included. Weight approx.: 23 kg
Set of platens dia. 165mm for compression test. Upper platen spherically seated. Vertical clearance approx. 359 mm with C1201 frame and 380mm with C1200 frame.
Upper loading swivel joint 40 mm dia for flexural tests to EN 1340 on concrete kerb units. Suitable for frame series 50-C120x. Lower rollers not included
Energy absorption test on slabs
Measurement of beam deflection and thougness
Displacement transducer for measurement of crack opening
UpgradingSpecial calibration procedures
The above upgrading is suitable if the frame is connected to automatic testing machines or control consoles.