Flexural frame for std beams, 100 kN cap.
EN 12390-5 | ASTM C78 | ASTM C293
- For testing concrete beams 100x100x400/500 mm and 150x150x600/700
- Complete with bearers
- For center and third point loading
- Connectable to control consoles, Automax and Pilot compression machines
- Piston return by counterweights
A simple and practical frame developed for testing on standard concrete beams. The distance of both pair of loading and support rollers can be easily adjusted: one of the two upper rollers can be removed and the other placed in the centre for centre point loading test.
|Max. load capacity kN||100|
|Load sensor||Pressure transducer|
|Max. vertical clearance mm||165|
|Horizontal clearance mm||180|
|Roller size mm||26 dia. x 160 long|
|Distance between upper rollers mm||150, 100 or single roller|
|Distance between lower rollers mm||450 and 300|
|Piston travel mm||75|
|Overall dimensions (lxwxh) mm, frame only||350x530x665|
|Overall dimensions (lxwxl) mm, including pedestal||350x530x1343|
|Weight approx. kg, frame only Including pedestal||
100 kN cap. flexure frame complete with rollers, pressure transducer, pedestal and connection kit for connection to control consoles
Set of platens dia. 165 mm for compression test. Upper platen spherically seated. Vertical clearance approx. 235 mm with C0910/FR
UpgradingSpecial calibration procedures
The above upgrading is suitable if the frame is connected to automatic testing machines or control consoles.