Cylinder capping equipment
EN 12390-3 | AASHTO T23 | AASHTO T126 | ASTM C31 | ASTM C192 | ASTM C617
Cylinder capping equipment: vertical cylinder capper model 55-C0121/21; cylinder carrier 55-C0121/3; capping compound 55-C0121/37 and ladle 55-C0121/5 Melting pot for capping compound model 55-D1403 Vertical cylinder capper for 160x320 mm specimens complete with ball traks for a positive location of the specimen, model 55-C0121/22A
When testing concrete cylinder specimens it is essential that the two ends are perfectly flat. This range of equipment allows the ends of the various sizes of concrete cylinders or cores to be capped using the sulphur capping compound.
Used to assure plane end surfaces perpendicular to the axis of the cylinder during the capping. Base and capping plate machined from steel. Guide is machined from cast aluminium or steel.
A simple accessory for an easy handling of specimens. Only available for dia. 150 mm (6”x12”9 and 160x320 mm sizes.
The compound is a mixture of sulphur and mineral filler to give a high finish and performance.
Used to melt the capping compound. The temperature is set and maintained at the desired value. Adjustable electronic thermoregulator and pilot lamp fully isolated conforming to CE requirement.
- Capacity: 5l approx.
- Temperature range: from +30 to 150°C
- Power: 700 W
internal 200 mm dia.160 mm depth
external 285 mm dia.x 275 mm high
- Weight approx.: 2.7 kg
Capping plate for concrete blocks
Used for capping concrete blocks with cement paste. 500x300 mm, 20 mm thick, made from steel, accurately machined. Protected against corrosion.
Vertical cylinder capper for dia. 3”x6” (76x152 mm) specimens. Weight approx. 7 kg
Vertical cylinder capper for dia. 4”x8” (102x203 mm) specimens. Weight approx. 7 kg
Vertical cylinder capper for dia. 100x200 mm specimens. Weight approx. 7 kg
Vertical cylinder capper for dia. 150x300 mm and 6”x12” specimens. Weight approx. 8 kg
Vertical cylinder capper for dia. 160x320 mm specimens. Weight approx. 8 kg
Vertical cylinder capper for dia. 160x320 mm specimens, complete with ball tracks for a positive location of the specimen. Weight approx. 8 kg
Cylinder carrier for dia. 150x300 mm and 6”x12” specimens. Weight approx. 1.2 kg
Cylinder carrier for dia. 160x320 mm specimens. Weight approx. 1.2 kg
Ultra strong capping compound, 22.5 kg package
Melting pot and ladle
Melting pot, 5 l cap., 700 W, 230 V, 50-60 Hz, 1 ph. Weight approx. 2.7 kg
Melting pot, 5 l cap., 700 W, 110 V, 60 Hz, 1 ph. Weight approx. 2.7 kg
Stainless steel ladle
Steel capping plate 500x300 mm, 20 mm thick. Weight approx. 30 kg
Link to other products