Controls Group http://www.controls-group.com/images/logo_controls.gif Three gang moulds 40x40x160 mm Three gang moulds 40x40x160 mm
close
Cement

Three gang moulds 40x40x160 mm

EN 196-1 | EN ISO 679
Main features
  • Individually checked with certified instruments
  • All parts marked and identified
  • Model 65-L0010/B has a minimum surface hardness of HV 400 and is surface protected with a rust inhibitor treatment. Supplied complete with traceable certificate of conformity.
  • Both models can be fit with 65-L0010/5 pegs for determining the coefficient of thermal expansion conforming to EN 1770
General description
General description
Used to produce the mortar specimens for compression and flexural tests. Made from special alloy steel, they are proposed in two version:
  • Standard 65-L0010/A having a minimum surface hardness of HV200 and
     
  • Heavy duty 65-L0010/B having a minimum surface hardness of HV400 which is recommended by the EN standards. Furthermore, this model is surface protected by a rust inhibitor treatment and is supplied complete with traceable certificate of conformity and identified by a serial number.

Both models can be fit with the 65-L0010/5 type B measuring pegs for determining the coefficient of thermal expansion conforming to EN 1770. See accessories.
  • Weight approx.: 10.9 kg
More +

Ordering info

65-L0010/A 
Three gang mould 40x40x160 mm to EN 196-1, minimum hardness HV 200

65-L0010/B 
Three gang mould 40x40x160 mm to EN 196-1, minimum hardness HV 400, complete with traceable certificate of conformity.

Accessories

65-L0010/5  
Measuring pegs, type B, for determining the coefficient of thermal expansion to EN 1770. Pack of 12 pieces.

Documents