Controls Group http://www.controls-group.com/images/logo_controls.gif Hydraulic shrinkage mould 40x40x160 mm Hydraulic shrinkage mould 40x40x160 mm
close
Cement

Hydraulic shrinkage mould 40x40x160 mm

EN 12617-4 | EN 12808-4 | NF P15-433
Images
General description
General description

The 62-L0009/F version is used for the determination of linear shrinkage of cement mortars (EN 12617-4). The same mould can be used for testing grouts conforming to EN 12808-4 replacing the standard plugs with the 62-L0010/H2 and placing two 15x40x160 mm plastic inserts  62-L0010/H3 inside each compartment. See accessories. Three gang mould, individually tested with certified instruments. Made of special alloy steel, minimum hardness HV200. The shrinkage measurement has to be done with the 62-L0035/A Length comparator with the .

The 62-L0009 version, conforming to UNI 6687, slightly differ from the 62-L0009/F version and it is used for the same determination.

Weight approx.: 12 kg

More +

Ordering info

62-L0009/F
Hydraulic shrinkage mould 40x40x160 mm, complete with shrinkage plugs to EN 12617-4

62-L0009
Hydraulic shrinkage mould 40x40x160 mm, complete with shrinkage plugs to UNI 6687

Accessories

62-L0010/H2
Contact points for 10x40x160 mm specimens to EN 12808-4. Pack of 12.

62-L0010/H3 
Plastic inserts 15x40x160 mm to EN 12808-4. Six pieces.
 
62-L0035/A
Digital length comparator 12.5x0.001 mm, with output for PC connection (special cable 82-D1261/LINK required).
 
62-L0034/7
Reference rod, 160 mm, for prisms obtained with the 62-L0009/F mould


Spare parts
62-L0009/1F
Spare shrinkage plugs to EN 12617-4. Pack of 12.
 
62-L0009/1
Spare shrinkage plugs to UNI 6687. Pack of 12.
 
 

Documents