Controls Group http://www.controls-group.com/images/logo_controls.gif Dynamic viscometers Dynamic viscometers
close

Dynamic viscometers

EN 12596 | ASTM D2171
Images
General description
General description
Cannon-Manning  and Asphalt institure vacuum viscometers
Used for determining the viscosity of bitumen at 60°C. Supplied complete with calibration certificate.
 
For determining the dynamic viscosity all the above viscometers have to be introduced in the 81-B0116/A Viscometer bath by the appropriate Holder: 81-B0117/H1 for Cannon-Manning models and 81-B0117/H2 for Asphalt institute models. Pressure regulator and vacuum manifold is also required.
See accessories.
More +

Ordering info

CANNON-MANNING VACUUM VISCOMETERS: FROM 81-B0117/1 TO 81-B0117/11
Code                                                      Viscosity range PB
81-B0117/1                            0.036          to           0.8
81-B0117/2                             0.12           to            2.4
81-B0117/3                             0.36           to             8
81-B0117/4                             1.2           to            24
81-B0117/5                             3.6           to            80
81-B0117/6                              12            to           240
81-B0117/7                              36            to           800
81-B0117/8                             120           to           2400
81-B0117/9                             360           to           8000
81-B0117/10                          1200          to          24000
81-B0117/11                          3600          to          80000
 
ASPHALT INSTITUTE VACUUM VISCOMETERS: FROM 81-B0117/15 TO 81-B0117/21
Code                                                      Viscosity range PB
81-B0117/15                                   42            to           800
81-B0117/16                                  180           to           8200
81-B0117/17                                  600           to          12800
81-B0117/18                                 2400          to          52000
81-B0117/20                                 9600          to        1400000
81-B0117/21                                38000          to        5800000

Accessories

Viscometer holders
For use with viscometer bath

81-B0117/H1 
Holder for Cannon-Manning viscometer

81-B0117/H2 
Holder for Asphalt institute viscometer
 
Viscometer bath conf. to ASTM D2171, EN 2171

81-PV0116/F  
Viscometer bath. Includes six holders for Cannon-Fenske Viscometers. 230 V, 50-60 Hz, 1 ph.

81-PV0116/FZ
Viscometer bath. Includes six holders for Cannon-Fenske Viscometers. 110 V, 60 Hz, 1 ph

Description
For use in the determination of both the kinematic and dynamic viscosity. Used to maintain the capillary type viscometers at uniform temperature. The bath consists of a cylindrical glass vessel with a stainless steel  cover with 50.8 mm dia. holes, motor stirrer, refrigerating coil with water connections, heating system, contact thermometer, external protection and insulating base. Six Cannon-Fenske viscometer holders included. Thermometers and viscometers not included.
  • Temperature: room temp. +5°C to 150°C
  • Power: 2000 W
  • Temperature stability: +/- 0.03°C
  • Temperature sensor: PID
  • Jar capacity: 20 liters approx.
  • 5 viscometer tubes
  • Weight approx.: 12 kg   
Pressure regulator and Vacuum manifold

81-B0116/B
Viscometer pressure regulator.
Used to control precisely the pressure. 230 V, 50-60 Hz, 1 ph.

81-B0116/C 
Vacuum manifold.
Used for vacuum application to the viscometers placed on the bath.
 
Kinematic and Dynamic viscosity thermometers

82-B0116/40 
Kinematic viscosity thermometer, range 58.5 to 61.5°C, type ASTM 47C

82-B0116/45 
Kinematic viscosity thermometer, range 133.5 to 136.5°C, type ASTM 110C

Documents