Controls Group http://www.controls-group.com/images/logo_controls.gif Servo-Hydraulic Universal Testing Machines UTM, 130 kN cap. Servo-Hydraulic Universal Testing Machines UTM, 130 kN cap.
close
Asphalt/bituminous mixture

Servo-Hydraulic Universal Testing Machines UTM, 130 kN cap.

  • UTM Systems :
Main features
  • Rigid two column load frame
  • Precision engineered for high stiffness and alignment
  • Double acting high precision actuator
  • High performance servo valve allows sinusoidal loading frequencies up to 70 Hz
  • Motorized crosshead positioning
  • Hydraulic crosshead clamping
  • Fully customizable to suit a large range of testing applications
  • Independent environmental chamber eliminating the transfer to mechanical vibrations to testing machine
  • Extra large version UTM-130XL available, designef to accomodate teh Extra Large Four Point Bend Jig
  • Supplied complete with high wality pre-filtered oil for longer life 
General description
General description
Universal Testing Machines (UTMs), Servo-hydraulic, equipped with high performances environmental chambers and extensive suite of accessories offer the greatest flexibility to perform all advanced pavement materials tests, ideal for Research purposes, featuring higher loads from 30 to 250 kN, lower temperatures -25°C, -50°C. Compatible and in compliant with larger range of accessories and Standards.

The heart of all these products is the IMACS, Multi-Axis Digital Controller and Data Acquisition System which delivers leading edge performance, unparalled real time computer computer control an flexible data acquisition, together with the powerful and professional UTS Software draws upon over 30 years of advanced materials testing experience. Used and relied upin by hundreds of researchers, you can buy with confidence knowing your test results having immediate credibility.

IPC Global's Hydraulic Power Supply (HPS), part of the machine, has been designed with integrated VFD (variable speed) technology assuring energy saving and noise reduction. HPS features return line filtration, remote starting and control via virtual pendant, air cooling and indication for low oil, over temperature and dirty filter. The system provides electronically adjustable oil pressure allowing greater control and safety. Oil accumulators further improve control accuracy while the high performance filters ensure long life system protection and reduced maintenance costs.

Extra-large version UTM-130XL has been designed and engineered specifically to accomodate the Extra Large Four Point Bend Jig and Extra Large UTM-130 Environmental chamber.
Based on our world renowned UTM-130, the UTM-130XL allows you to perform the four point ben test on asphalt specimen, up to 160x200 mm (h x w) and a minimum lenght of 790 mm, at non-ambient temperatures.
UTM-130XL delivers superior reliability and accuracy with proficient perdormance of tension, compression and dynamic loading analyses on all types of materials.
This unique testing system can be used with our full range of test accessories.

UTM-250 Servo-Hydraulic Universal Testing Machine is available on request.
Designed and built to IPC Global's highest standard for Civil Engineering laboratories, IPC Global's UTM-250 delivers superior reliability and accuracy with proficient performance of tension, compression and dynamic loading analysis on high strenght materials. 
More +

Technical specifications

Models 79-PV70C05
79-PV70C06
79-PV70C15
79-PV70C16
FRAME
Load capacity +/- 100 kN dynamic
+/- 130 kN static
Frequency Up to 70 Hz
Actuator type Tie rod sealed
Optional labyrinth bearing
Stroke 100 mm (+/- 50 mm)
Inbuilt displacement transducer 100 mm
Adjustable crosshead Hydraulic
Crosshead clamping Hydraulic
Maximum vertical daylight 1015 mm
Space between columns 600 mm 770 mm
HYDRAULIC POWER PACK
Remote starting available
High pressure 210 bar
Low pressure 100 bar
Flow rate 18 l/min
Mains power 7.5 kW
208 V, 60 Hz, 3ph (models 79-PV70C05 and C15)
or 380-415 V, 50-60 Hz, 3 ph (models 79-PV70C06 and C16)
Cooling system Water/oil heat exchanger
Optional water chiller
Optional air-cooling
Oil tank capacity 220 l
Size (h x w x d) 1220x730x1260 mm
Weight approx. 630 kg (without oil)
Frame dimensions 
(w x d x h)
1000x1000x3000 mm 1250x1000x3000 mm
Approximate total weight 775 kg  920 kg 

Ordering info

79-PV70C05
IPC Global UTM-130, Servo-hydraulic universal testing machine 130 kN cap., including Dual Axis Control and Data Acquisition System IMACS, 130 kN Servo-hydraulic actuator, with high performance servo-valve and built-in LVDT (+/- 50 mm) with In-Line Conditioner (ILC), load frame with hydraulic crosshead positioning and clamping, hydraulic power supply, load cell with ILC.
380 V, 50 Hz, 3 ph

79-PV70C06
Same as above but 220 V, 60 Hz, 3 ph.

79-PV70C15
IPC Global UTM-130, Servo-hydraulic universal testing machine 130 kN cap., Extra-large version, including Dual Axis Control and Data Acquisition System IMACS, 130 kN Servo-hydraulic actuator, with high performance servo-valve and built-in LVDT (+/- 50 mm) with In-Line Conditioner (ILC), load frame with hydraulic crosshead positioning and clamping, hydraulic power supply, load cell with ILC.
380 V, 50 Hz, 3 ph

79-PV70C16
Same as above but 220 V, 60 Hz, 3ph.


UTM-250
IPC Global UTM-250, Servo-hydraulic universal testing machine 250 kN cap. Available on request.

Accessories

Environmental chambers for UTM-130 and UTM-130XL
Using a high quality mechanical refrigeration system, enable users to analyze materials' properties at real-life working temperatures for extended periods.

79-PV70E32
Environmental chamber for UTM-130 with working temperatures from -50 to +100° C.
110, 220 or 230 V, 50-60 Hz, 1 ph

79-PV70E42
Environmental chamber for UTM-130 with working temperatures from -25 to +60° C.
208, 240, 400 or 480 V, 50-60 Hz, 3 ph

79-PV70E52
Extra large version environmental chamber for UTM-130XL with working temperatures from -50 to +100° C.
110, 220 or 230 V, 50-60 Hz, 1 ph


Temperature measurement kit
79-PV70116

Temperature measurement kit (-50 to +100° C) including two probes.

Additional Information

IMACS Digital Controller and Data Acquisition System

IPC Global's world leading IMACS digital controller and data acquisition system is at the heart of all our servo-controlled testing systems. It provides excellent waveform fidelity from integrated channel acquisition and control functions, at speeds of up to 5 kHz simultaneously on all channels.
The IMACS utilizes flash-based firmware which allows updates of all modules onsite. Analogue inputs auto-calibrate on power-up giving confidence in readings and a low data noise performance with over-sampled data.
With up to 8 expandable control axes and 32 data acquisition channels, you can have total confidence in your testing results. It has an exceptional data resolution and control with up to 20 bit effectiive auto-ranging data acquisition and a real-time digital computer control with 32 bit processing.
Three versions are available: for Servo-Hydraulic, Servo-Pneumatic and Servo-Electromechanical systems.


UTS Software

IPC Global's powerful and professional UTS Software draws upon over 30 years of advanced materials testing experience. IPC Global's test and control software is known for its simplicity in use, clarity of results and analytical power.
It was developed from expert knowledge of applications to run automated test routines and therefore speeds up testing. It is written in powerful, professional Delphi and features real-time graphs for monitoring the specimen under test; portable binary data files or sharing, reviewing and analysis; and "live" transducer levels display.
The purpose-built UTS applications have dialogue help boxes for automated test routines and easy-to-read graphic screens for test set up and reviewing. The test is totally programmable from the user.

Documents