close
CLIENT ACCESS - technical support
Not yet registered?
Forgot your password?
Asphalt/bituminous mixture

Indirect tensile test jig

EN 12697-24 | ASTM D4123 | EN 12697-26C | AASHTO TP31 | BS DD 213 | BS DD ABF
General description
General description
The indirect Tensile test set, complete with the suitable accessories, is the easiest method to determine stiffness and fatigue behavior of asphalt. It can be used for both 100 and 150 mm diameter specimens. The jig has to be fit with the accessories depending on the Standard requirements. See accessories.
To be used with the \#servo_-pneumatic-dynamic-testing-system\#, \#servo_hydraulic-dynamic-testing-system-30-kn-cap\#, or \#servo_hydraulic-dynamic-testing-system-130-kn-cap\#
More +

Ordering info

78-PV7111 
Indirect tensile test jig for 100 and 150 mm dia. samples.

Accessories

To perform the IDT Fatigue test conforming to EN 12697-24 Annex E, on 100 and 150 mm dia. specimens, the 78-PV7111 jig has to be fit with:

78-PV7120 
Set of two LVDT 3.75 mm transducers, double ball end

78-PV7122 
100 mm specimen LVDT mounting strip

78-PV7123 
150 mm specimen LVDT mounting strip

78-PV7132 
100 mm diameter PVC specimen

78-PV7133 
150 mm diameter PVC specimen
 
To perform the IDT Stiffness test conforming to EN 12697-26 Annex C, ASTM D4123, AASHTO TP31, BS DD 213, thje 78-PV7111 jig has to be fit with:

78-PV7115 
Set of two LVDT 0.1 mm transducers

78-PV7131 
Asphalt proving ring for routine check of load cell and deformation transducers

78-PV7132 
100 mm diameter PVC specimen

78-PV7133 
150 mm diameter PVC specimen

78-PV7134
Torque screwdriver